Page 2
General notes With respect to any damages arising in operation with the described product or this document, S&T shall be liable according to the General Conditions on which the delivery of the described product and this document are based. This product is not intended for use in life support appliances, devices or systems where a malfunction of the product can reasonably be expected to result in personal injury.
IntelliTrac X1-Plus Series User Guide Thank you for your purchasing IntelliTrac X1-Plus GPS Vehicle Tracking device. The benefits are: Improve Safety Ensure Security Good efficiency on Fleet management and Dispatch solution Asset and resource management Economic operation and improving productivity Keep the Journey record for future analysis or accident report Where is the Car? When it will arrive? What is its speed now? 1.1 Scope...
IntelliTrac X1-Plus Series User Guide Backup battery and tamper sensing GPS Antennas are primarily used to indicate loss of Main Power and loss of GPS antenna connectivity. Device supports Over-the-air firmware upgrade to deliver added functionality without physically touching the device once installed. 1.3 Hardware Architecture The IntelliTrac X1-Plus hardware includes Micro-controller, GPS receiver, GSM/GPRS modem, I/Os interface.
IntelliTrac X1-Plus Series User Guide User can use PC HyperTerminal connect to the Diagnostic / setting port to configure the AVL. The GPS is used for car accident. Car tow-away warning and power management. GPIO can be used to connect to any customer monitoring points (door switch, anti-thief) or Actuators.
IntelliTrac X1-Plus Series User Guide 2. Basic Operations 2.1 Hardware Installation (1) SIM Card Installation Press yellow button to eject the SIM card holder. Put the SIM card on the SIM card holder. Insert the SIM card holder to the device correctly. (2) GPS Antenna Installation Systems &...
IntelliTrac X1-Plus Series User Guide Connect the GPS Receiver antenna to the right-down Press Mini DIN connector. (3) Power, I/O Cable Installation 2.2 Connectors Pins Assignment The I/O cable is a 10-wires cable which include power and positive/negative inputs and outputs. Systems &...
Page 9
IntelliTrac X1-Plus Series User Guide (4) Install GSM Antenna Connect the GSM antenna to the SMA connector with label “GSM”. (5) Install RF Receiver (Optional) Connect the RF receiver it the 3 pins connector with label “RF”. GSG Antenna Power I/O Cable Serial Cable Systems &...
IntelliTrac X1-Plus Series User Guide 4.Electrical reliability and radio characteristics ntelliTrac X1-Plus are Absolute maximum rating for power supply and voltage on digital input pins of the I list in following table: 4.1 Operating temperatures The operating temperature is listed in following table: * The Intelli Trac X1-Plus device can work , but the deviation from the specification may occur.
IntelliTrac X1-Plus Series User Guide FCC Regulations: This mobile device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
IntelliTrac X1-Plus Series User Guide About Systems & Technology Corporation IntelliTrac X-Series AVL device is produced by Systems & Technology Corporation. The company is a key developer and supplier of advanced systems in the Automatic Vehicle Location (AVL), Digital Map and Car Navigation Systems.
Need help?
Do you have a question about the IntelliTrac X1 Plus series and is the answer not in the manual?
Questions and answers