Page 1
ECONO PRO TOMATO KING Thank you for purchasing this Vollrath Food Processing Equipment. Before operating the equipment, read and familiarize yourself with the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging. Use this packaging to ship the equipment if repairs are needed.
To ensure safe operation, read the following statements and 2. Place the slicer on a table or counter. Position the Tomato Pro Positive understand their meaning. This manual contains safety precautions Stop Pivot Arm over a table edge or sink edge to hold the equipment which are explained below.
To adjust Pusher Head Fingers between blades: 3. When changing blade assemblies on the Tomato Pro and Econo Pro 1. Carefully insert a screwdriver (B) between the slots in the Pusher Head equipment, pull the pusher head assembly back away from the blades so Assembly (A).
Page 4
anual rocessing quiPMent 2. It may also be necessary to adjust the Pusher Head Assembly (A) from the back side of the equipment, as well. If needed, carefully insert a screwdriver (B) between the slots in the Pusher Head Assembly. Gently tap on the screwdriver (B) (up or down) to alter the location of the Pusher Head Fingers so they slide effortlessly through the blades.
Page 5
Please contact the qualified professional repair service listed below. VOLLRATH Induction Repair Service • 1-800-825-6036 (USA) or www.vollrathco.com When contacting the Authorized Professional Service Center, please be ready with the model number, serial number, and proof of purchase showing the date the equipment was purchased.
Page 6
SPare PartS liSt - tomato Pro & econo Pro LETTER PART NUMBER DESCRIPTION Blade Block Pin Rubber Feet (Old Style) Rubber Feet, Deep (New Style) 0658 Rubber Seal 0660 Bolt, Blade Block (New Style) Hex Head 1/4-20 x 1 3/8”...
Page 7
- tomato Pro & econo Pro T, CC & DD T, CC & DD ’ peratOr anual...
Page 8
anual rocessing quiPMent SPare PartS liSt - tomato King LETTER PART NUMBER DESCRIPTION Pusher Head and Handle Assembly (3/16” and 3/8”) Pusher Head and Handle Assembly (1/4”) Bridge Casting (Old Style) Bridge Casting (New Style) Platform Base Casting Rubber Feet (Old Style) Rubber Feet, Deep (New Style) Pivot Post, Nut and Washer Assembly Nylon Disk...
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE As The Vollrath Company LLC’s only responsibility and the purchaser’s only remedy, for any breach of warranty, The Vollrath Company LLC will repair or, at its option, replace the defective product or part without charge, except as otherwise provided below: •...
ONLINE: Register your warranty on-line now at www.Vollrathco.com NO WEB ACCESS: If you do not have access to the web, kindly register by completing the warranty registration form and faxing it to The Vollrath Co. LLC office in the country of purchase.
Need help?
Do you have a question about the TOMATO PRO and is the answer not in the manual?
Questions and answers