Summary of Contents for Favite F741-SD
- Page 1 User’s Manual v1.0.0.0 F741-SD A/2013 www.favite.com Copyright○ 2013, Favite, Inc.
-
Page 2: Table Of Contents
Figure 1: F741-SD Reader Physical Size Figure 2: F741-SD Reader I/O Terminal Antenna Port Terminal Interface Figure 3: Figure 4: F741-SD GPIO Pin definition and I/O description Figure 5: F741-SD (1) Figure 6: F741-SD (2) Figure 7: F741-SD Power Supply and Adapter cable... - Page 3 F740 User Guide Tables Table 1: Reference Documents ..................Table 2: Specification of the F741-SD................v2.2.1.0, Copyright○ 2013, Favite, Inc...
-
Page 4: Introduction
RFID Reader's capabilities. 1.1 Overview F741-SD, one of FAVITE RFID reader family, is an Intel ATOM CPU based smart reader. The F741-SD is embedded with Impinj R2000 chip and following EPC Class1 Gen2 Dense Reader mode (DRM) / ISO 18000-6C. The F741-SD is equipped with 4 TNC RF antenna ports which could support 4 mono-static antennas that could support to the richest enterprise applications. -
Page 5: Reference Documents
F740 User Guide 1.3 Reference Documents Table 1: Specification of the F741-SD System PHY: Impinj R2000 Chipset MAC: ATMEL AT91SAM7S-256 Protocol RFID Protocol Support EPC Gen 2 , ISO 18000-6C Support EPC DRM Yes (with DRM Filter) Switchable US: 902 ~ 928MHz（FHSS）... - Page 6 Die-cast aluminum Mounting Wall mounting, vertical placement Power Input DC 19V +- 0.5V / 1.5A @ 33dBm Power Consumption 28.5 W (Typical) Communication USB2.0 Ethernet 10/100 Base-T (RJ-45) GPIO 4 digital input, 4 digital output v2.2.1.0, Copyright○ 2013, Favite, Inc...
- Page 7 F740 User Guide M M M M echanical: Reader Physical Size echanical: Reader Physical Size echanical: Reader Physical Size echanical: Reader Physical Size Figure 1: F741-SD Reader Physical Size v2.2.1.0, Copyright○ 2013, Favite, Inc...
- Page 8 F740 User Guide v2.2.1.0, Copyright○ 2013, Favite, Inc...
- Page 9 F740 User Guide Figure 2: F741-SD Reader I/O Terminal USB2.0/ GPIO RS232 reset RJ45 power FTDI com port SD card cocket Antenna Port Terminal Interface Figure Antenna1 Antenna2 Antenna3 Antenna4 power link error debug v2.2.1.0, Copyright○ 2013, Favite, Inc...
- Page 10 F740 User Guide Figure 4: F741-SD GPIO Pin definition and I/O description. Pin definition Pin definition Pin definition Pin definition D-SUB 15pin GPIO_O1 GPIO_O2 GPIO_I1 GPIO_I2 GND-1 GND-2 GPIO_O3 GPIO_O4 GPIO_I3 GPIO_I4 GPIO GPIO-OUT Circuit diagram (add figure#) VDD3.3VGP 47K/6...
- Page 11 F740 User Guide If F741-SD is going to transmit signal to other device, please connect to the device which is below 48V and 10mA. If user wants F741-SD to receive data from other device through GPIO, please connect 24V power source to PIN19 or PIN20 and connect the device output line to Pin 1~ Pin8.
-
Page 12: Reader Hardware Installation And Operation
Your RFID Reader Kit is shipped with the items listed below. Please verify the contents of your received shipment before assembling. • RFID reader. • Power supply and cables (two sections: one attached, one detached). • CD-ROM containing demonstration software, user guides and documentation. Figure 5: F741-SD (1) v2.2.1.0, Copyright○ 2013, Favite, Inc... - Page 13 F740 User Guide Figure 6: F741-SD (2) Figure 7: F741-SD Power Supply and Adapter cable v2.2.1.0, Copyright○ 2013, Favite, Inc...
-
Page 14: Diagnostic Leds
F740 User Guide 2.2 Diagnostic LEDs The F741-SD is including diagnostic LEDs on the face of the reader to provide easy and convenient external indication for various operating conditions: POWER (green) – indicates that power is applied to the reader. -
Page 15: Antenna Panel
Demonstration Software： Please refer to the document “FAVITE API Programming Guide_DotNet CSharp”, “FAVITE SDK Getting Started Guide CSharp”, “FAVITE Saturn Demo API User Guide” and “F740 GPIO Programming Guide_DotNet CSharp”.Please refer to the document “FAVITE API Programming Guide_DotNet CSharp”, “FAVITE SDK Getting Started Guide CSharp”, “FAVITE Saturn Demo API User Guide”... - Page 16 The said legal communications means radio communications are operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. v2.2.1.0, Copyright○ 2013, Favite, Inc...
- Page 17 1. The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference v2.2.1.0, Copyright○ 2013, Favite, Inc...
- Page 18 FCC NOTICE: To comply with FCC part 15 rules, the system must be professionally installed to ensure compliance with the Part 15 certification. It is the responsibility of the operator and professional installer to ensure that only certified systems are deployed in the United States. v2.2.1.0, Copyright○ 2013, Favite, Inc...