chiliGREEN W25BBZ W8 User Manual
  1. Manuals
  2. Brands
  3. chiliGREEN Manuals
  4. Laptop
  5. W25BBZ W8
  6. User manual

chiliGREEN W25BBZ W8 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
V13.1.00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W25BBZ W8 and is the answer not in the manual?

Questions and answers

Related Manuals for chiliGREEN W25BBZ W8

Summary of Contents for chiliGREEN W25BBZ W8

  • Page 1 V13.1.00...
  • Page 3 Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication.

  • Page 4: Eup-Standby And Off Mode Power Consumption Statement

    Preface R&TTE Directive This device is in compliance with the essential requirements and other relevant provisions of the R&TTE Direc- tive 1999/5/EC. This device will be sold in the following EEA countries: Austria, Italy, Belgium, Liechtenstein, Denmark, Lux- embourg, Finland, Netherlands, France, Norway, Germany, Portugal, Greece, Spain, Iceland, Sweden, Ireland, United Kingdom, Cyprus, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Malta, Slovakia, Poland, Slov- enia.
  • Page 5 Preface CE Marking This device has been tested to and conforms to the regulatory requirements of the European Union and has at- tained CE Marking. The CE Mark is a conformity marking consisting of the letters “CE”. The CE Mark applies to products regulated by certain European health, safety and environmental protection legislation.

  • Page 6: Fcc Statement

    Preface FCC Statement (Federal Communications Commission) You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 7: Fcc Rf Radiation Exposure Statement

    Preface FCC RF Radiation Exposure Statement: This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

  • Page 8: Important Safety Instructions

    Preface IMPORTANT SAFETY INSTRUCTIONS Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock, and injury to persons when using any electrical equipment: Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

  • Page 9: Instructions For Care And Operation

    Preface Instructions for Care and Operation The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions: Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged. Do not expose the computer Do not place it on an unstable Do not place anything heavy...
  • Page 10 Preface Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other strong magnetic fields. These can hinder proper performance and damage your data. Follow the proper working procedures for the computer. Shut the computer down properly and don’t forget to save your work.

  • Page 11: Power Safety

    Preface Power Safety The computer has specific power requirements: • Only use a power adapter approved for use with this computer.  • Your AC/DC adapter may be designed for international travel but it still requires a Power Safety steady, uninterrupted power supply. If you are unsure of your local power specifications, Warning consult your service representative or local power company.

  • Page 12: Polymer Battery Precautions

    Preface Polymer Battery Precautions Note the following information which is specific to polymer batteries only, and where applicable, this overrides the general battery precaution information overleaf. • Polymer batteries may experience a slight expansion or swelling, however this is part of the battery’s safety mecha- nism and is not a cause for concern.

  • Page 13: Battery Precautions

    Preface Battery Precautions • Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer. • Do not remove any batteries from the computer while it is powered on. • Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any way. Even if the computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire.

  • Page 14: Cleaning

    Preface Cleaning Do not apply cleaner directly to the computer; use a soft clean cloth. Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer. Servicing Do not attempt to service the computer yourself. Doing so may violate your warranty and expose you and the computer to electric shock.

  • Page 15: Travel Considerations

    Preface Travel Considerations Packing As you get ready for your trip, run through this list to make sure the system is ready to go: Check that the battery pack and any spares are fully charged. Power off the computer and peripherals. Close the display panel and make sure it’s latched.
  • Page 16 Preface On the Road In addition to the general safety and maintenance suggestions in this preface, and Chapter 8: Troubleshooting, keep these points in mind: Hand-carry the notebook - For security, don’t let it out of your sight. In some areas, computer theft is very common.
  • Page 17 Preface Developing Good Work Habits Developing good work habits is important if you need to work in front of the computer for long periods of time. Improper work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints.

  • Page 18: Lcd Screen Care

    Preface Lighting Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your neck and shoulders. • Position the display to avoid glare or reflections from overhead lighting or outside sources of light. • Keep the display screen clean and set the brightness and contrast to levels that allow you to see the screen clearly. •...

  • Page 19: Table Of Contents

    Preface Contents Notice ................................I EuP-Standby and Off Mode Power Consumption Statement: ..............II FCC Statement ............................IV FCC RF Radiation Exposure Statement: ..................... V Instructions for Care and Operation ......................VII Power Safety ...............................IX Polymer Battery Precautions ........................X Battery Precautions .............................XI Cleaning ..............................
  • Page 20 Preface System Map: LCD Panel Open - Model A Design I .................1-7 System Map: LCD Panel Open - Model A Design II ................1-8 System Map: LCD Panel Open - Model A Design III ................1-9 System Map: LCD Panel Open - Model B ....................1-10 LCD Panel Open - Model C ........................1-11 LED Indicators ............................1-12 Hot Key Buttons - Model A Design I Only .....................1-13...
  • Page 21 Preface Features & Components Overview ..............................2-1 Hard Disk Drive ............................2-2 Optical (CD/DVD) Device ........................2-3 Loading Discs ............................2-3 Handling CDs or DVDs ..........................2-4 DVD Regional Codes ..........................2-5 Multi-In-1 Card Reader ..........................2-6 Touchpad and Buttons/Mouse ........................2-7 Gestures and Device Settings ........................2-8 Audio Features ............................2-12 Power Management Overview ..............................3-1 The Power Sources ............................3-2...
  • Page 22 Preface Shut down ..............................3-7 Configuring the Power Buttons .........................3-8 Resuming Operation ..........................3-9 Power Conservation Modes ........................3-10 Battery Information ..........................3-11 Battery Power ............................3-11 Conserving Battery Power ........................3-12 Battery Life ..............................3-13 New Battery .............................3-13 Recharging the Battery with the AC/DC Adapter ...................3-13 Proper handling of the Battery Pack ......................3-14 Battery FAQ .............................3-15 Drivers &...
  • Page 23 Preface Video (VGA) .............................4-6 LAN ................................4-6 CardReader ..............................4-6 TouchPad ..............................4-6 Hot Key ..............................4-6 Audio .................................4-7 Windows Experience Index ........................4-8 Optional Drivers ............................4-8 BIOS Utilities Overview ..............................5-1 The Setup Utility ............................5-2 Failing the POST ............................5-3 Fatal Errors ..............................5-3 Non-Fatal Errors ............................5-3 Setup Screens .............................5-4 Main Menu ..............................5-5 Advanced Menu ............................5-7...
  • Page 24 Preface Upgrading The Computer Overview ..............................6-1 When Not to Upgrade ..........................6-2 Removing the Battery ..........................6-4 Upgrading the Hard Disk Drive .........................6-5 Upgrading the Optical (CD/DVD) Device ....................6-8 Removing the Optical Device for Model A Computers ................6-9 Removing the Optical Device for Model B/C Computers ...............6-11 Upgrading the System Memory (RAM) ....................6-12 Modules &...
  • Page 25 Preface 3G Module ...............................7-24 Wireless Manager ............................7-28 Wireless Manager Installation .........................7-28 Wireless Manager Application ........................7-29 Profiles ..............................7-32 Settings ..............................7-36 Text Messaging Service (SMS) .......................7-39 SMS Utility ..............................7-39 Sending a Text Message ..........................7-41 Phonebook ...............................7-44 SMS Settings ............................7-47 Sierra Wireless AirCard Watcher ......................7-50 Sierra Wireless AirCard Watcher Installation ..................7-50 AirCard Watcher Application ........................7-51 Air Card Watcher Menu ..........................7-55...
  • Page 26 Preface Trusted Platform Module .........................7-64 Enabling & Activating TPM ........................7-65 Trusted Platform Module (TPM) Driver Installation ................7-67 Initializing TPM ............................7-68 Infineon Security Platform Settings Tool ....................7-70 Troubleshooting Overview ..............................8-1 Basic Hints and Tips ..........................8-2 Backup and General Maintenance ......................8-3 Viruses ...............................8-4 Upgrading and Adding New Hardware/Software ..................8-5 Problems and Possible Solutions .......................8-7 Bluetooth Connection Problems ......................8-13...
  • Page 27 Preface AMD Video Driver Controls Video Driver Installation ..........................C-1 Video (VGA) ............................C-1 AMD Vision Engine Control Center ......................C-2 AMD Vision Engine Control Center Preferences ..................C-3 Display Devices & Options ........................C-7 Configuring an External Display ......................C-8 Configuring an External Display In Windows 7 ...................C-13 HDMI Audio Configuration ........................C-17 Specifications Processor Options .............................D-2...
  • Page 28 Preface Keyboard & Pointing Device ........................D-3 Communication ............................D-3 Power Management ..........................D-4 Power ................................D-4 Battery ...............................D-4 Security ..............................D-4 Indicators ..............................D-4 Design Feature ............................D-4 Operating System ............................D-4 Environmental Spec ..........................D-4 Dimensions & Weight ..........................D-5 Windows 8 Overview ..............................E-1 Windows 8 Start Screen & Desktop ......................E-2 Apps &...
  • Page 29 Preface Keyboard Shortcuts ..........................E-14 Function/Hot Key Indicators & Control Center ..................E-15 Video Features ............................E-16 To Configure Displays from Devices (Charms Bar): ................E-16 Power Options ............................E-17 Shut Down, Restart or Sleep ........................E-17 Ctrl + Alt + Delete Key Combination ....................E-18 Wake On LAN Settings ..........................
  • Page 30 Preface Charms Bar ............................. E-38 3G Module (Windows 8) ........................E-42 3G Configuration in Windows 8 ......................E-43 Charms Bar ............................. E-43 XXVIII...

  • Page 31: Quick Start Guide Overview

    Quick Start Guide Chapter 1: Quick Start Guide Overview This Quick Start Guide is a brief introduction to the basic features of your computer, to navigating around the computer and to getting your system started. The remainder of the manual covers the following: •...

  • Page 32: Advanced Users

    Quick Start Guide Advanced Users If you are an advanced user you may skip over most of this Quick Start Guide. However you may find it useful to refer to “What to Install” on page 4 - “BIOS Utilities” on page 5 - 1 “Upgrading The Computer”...

  • Page 33: Not Included

    Quick Start Guide Not Included Operating Systems (e.g. Windows 7) and applications (e.g. word processing, spreadsheet and database pro- grams) have their own manuals, so please consult the appropriate manuals.  Drivers If you are installing new system software, or are re-configuring your computer for a different system, you will need to install the drivers listed in “Drivers &...

  • Page 34: System Startup

    Quick Start Guide System Startup Remove all packing materials. Place the computer on a stable surface. Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports. Attach the AC/DC adapter to the DC-In jack on the left of the computer, then plug the AC power cord into an outlet, and connect the AC power cord to the AC/DC adapter.

  • Page 35: System Software

    Quick Start Guide System Software Your computer may already come with system software pre-installed. Where this is not the case, or where you are re-configuring your computer for a different system, you will find the Windows 7 (with Service Pack 1 in- stalled) and Windows 8 operating systems are supported.

  • Page 36: Model Differences

    Quick Start Guide Model Differences This notebook series includes two different models that vary slightly in design style, color and general appear- ance (all models have distinct design styles some of which are pictured on the following pages). Not all the mod- el variants, colors, configurations, buttons etc.

  • Page 37: System Map: Lcd Panel Open - Model A Design I

    Quick Start Guide System Map: LCD Panel Open - Model A Design I Figure 1 - 2 LCD Panel Open -  Model A Design I Wireless Device Built-In PC Camera Operation Aboard (Optional) Aircraft Power Button The use of any portable elec- Hot Key Buttons tronic transmission devices LED Status...

  • Page 38: System Map: Lcd Panel Open - Model A Design Ii

    Quick Start Guide System Map: LCD Panel Open - Model A Design II Figure 1 - 3 LCD Panel Open - Model A Design II  Built-in PC Camera Wireless Device Operation Aboard (Optional) Aircraft Power Button The use of any portable electronic LED Status transmission devices aboard air- craft is usually prohibited.

  • Page 39: System Map: Lcd Panel Open - Model A Design Iii

    Quick Start Guide System Map: LCD Panel Open - Model A Design III Figure 1 - 4 LCD Panel Open -  Model A Design III Wireless Device Built-In PC Camera Operation Aboard (Optional) Aircraft Power Button The use of any portable electronic transmission devices aboard air- Hot Key Buttons craft is usually prohibited.

  • Page 40: System Map: Lcd Panel Open - Model B

    Quick Start Guide System Map: LCD Panel Open - Model B Figure 1 - 5 LCD Panel Open Model B  Built-in PC Camera Wireless Device Operation Aboard (Optional) Aircraft PC Camera LED The use of any portable electronic Power Button transmission devices aboard air- craft is usually prohibited.

  • Page 41: Lcd Panel Open - Model C

    Quick Start Guide LCD Panel Open - Model C Figure 1 - 6 LCD Panel Open Model C  Built-In PC Camera Wireless Device (Optional) Operation Aboard PC Camera LED Aircraft Power Button The use of any portable elec- LED Status tronic transmission devices Indicators aboard aircraft is usually pro-...

  • Page 42: Led Indicators

    Quick Start Guide LED Indicators Icon Color Description The LED indicators on the computer display helpful Scroll Lock Activated (to activate press information about the current status of the computer. Green Fn & Scr Lk) Icon Color Description Green Caps Lock Activated Orange DC Power is Plugged In Green...

  • Page 43: Hot Key Buttons - Model A Design I Only

    Quick Start Guide Hot Key Buttons - Model A Design I Only These buttons give instant access to the default Internet browser and e-mail program, and allow you to toggle the Silent Mode on/off with one quick button press. Hot Key Function Toggle *Silent Mode (for power saving) Activate the Default Internet Program...

  • Page 44: Hot Key Buttons - Model A Design Iii Only

    Quick Start Guide Hot Key Buttons - Model A Design III Only These buttons give instant access to the default Internet browser and e-mail program, and allow you to toggle the WLAN module on/off with one quick button press. Hot Key Function Toggle WLAN Module On/Off Activate the Default Internet Program...

  • Page 45: Keyboard - Model A Designs I & Ii

    Quick Start Guide Keyboard - Model A Designs I & II  The keyboard has an embedded numerical keypad for easy numeric data input, and Other Keyboards function keys to change operational features instantly. See Table 1 - 6, on page 1 - for function key details and Appendix E for Windows 8 keyboard information.

  • Page 46: Keyboard - Model A Design Iii

    Quick Start Guide Keyboard - Model A Design III  The keyboard has an embedded numerical keypad for easy numeric data input, and Other Keyboards function keys to change operational features instantly. See Table 1 - 6, on page 1 - for function key details and Appendix E for Windows 8 keyboard information.

  • Page 47: Keyboard - Models B & C

    Quick Start Guide Keyboard - Models B & C  The keyboard has an embedded numerical keypad for easy numeric data input, and Other Keyboards function keys to change operational features instantly. See Table 1 - 6, on page 1 - for function key details and Appendix E for Windows 8 keyboard information.

  • Page 48: Function/Hot Key Indicators

    Quick Start Guide Function/Hot Key Indicators The function keys (F1 - F12 etc.) will act as hot keys when pressed while the Fn key is held down. In addition to the basic function key combinations; visual indicators are available when the hot key utility is installed. Keys Function Keys...

  • Page 49: Control Center

    Quick Start Guide Control Center Press the Fn + Esc key combination, or double-click the icon in the notification area of the taskbar to toggle the Control Center on/off. The Control Center gives quick access to frequently used controls and en- ables you to quickly turn modules on/off (see Appendix B for full details).

  • Page 50: System Map: Front & Rear Views

    Quick Start Guide System Map: Front & Rear Views Figure 1 - 11 Front & Rear Views Model A LED Power Indi- cators (see Table 1 - 2, on page 1 - Model B Battery Security Lock Slot Model C ...

  • Page 51: System Map: Left Views

    Quick Start Guide System Map: Left Views Figure 1 - 12 Left Views Model A DC-In Jack External Monitor Port RJ-45 LAN Jack HDMI-Out Port Model B USB 3.0 Port Vent/Fan Intake/ Outlet Multi-in-1 Card Reader Model C  Multi-In-1 Card Reader The card reader allows you to use the most popular digital storage card formats: MMC (MultiMedia Card) / RS MMC SD (Secure Digital) / Mini SD / SDHC / SDXC...

  • Page 52: System Map: Right Views

    Quick Start Guide System Map: Right Views Figure 1 - 13 Right Views Microphone-In Model A Jack Headphone-Out Jack USB 2.0 Port Optical Device Drive Bay (for CD/ Model B DVD Device) Security Lock Slot Model C 1 - 22 System Map: Right Views...
  • Page 53 Quick Start Guide   Changing DVD Regional Codes Disk Eject Warning Go to the Control Panel and double-click Device Don’t try to eject a CD/DVD while the system is ac- Manager (Hardware and Sound), then click the + cessing it. This may cause the system to “crash”. Stop next to DVD/CD-ROM drives.

  • Page 54: System Map: Bottom View - Model A

    Quick Start Guide System Map: Bottom View - Model A Figure 1 - 14 Bottom View - Model A Battery Component Bay Cover Vent/Fan Intake/ Outlet Hard Disk Bay Cover 3G USIM Card Cover (Optional)  The CPU is not a user serviceable part.

  • Page 55: System Map: Bottom View - Model B

    Quick Start Guide System Map: Bottom View - Model B Figure 1 - 15 Bottom View - Model B Battery Component Bay Cover Vent/Fan Intake/ Outlet Hard Disk Bay Cover 3G USIM Card Cover (Optional) Speakers  The CPU is not a user serviceable part.

  • Page 56: Bottom View - Model C

    Quick Start Guide Bottom View - Model C Figure 1 - 16 Bottom View Model C Battery Component Bay Cover Fan Intake/Vent Hard Disk Bay Cover Speakers  The CPU is not a user serviceable part. Overheating  To prevent your comput- from overheating Battery Information...

  • Page 57: Windows 7 Start Menu & Control Panel

    Quick Start Guide Windows 7 Start Menu & Control Panel Most of the control panels, utilities and programs within Windows 7 are accessed from the Start menu (see pendix E for information on the Windows 8 OS). When you install programs and utilities they will be installed on your hard disk drive, and a shortcut will usually be placed in the Start menu and/or the desktop.

  • Page 58: Video Features

    Quick Start Guide Video Features You can switch display devices, and configure display options, from the Display control panel (in Appearances and Personalization) in Windows 7. For more detailed video information see “AMD Video Driver Controls” on page C - 1.
  • Page 59 Quick Start Guide To access the AMD Vision Engine Control Center (See Appendix C for detailed information): Right-click the desktop and select AMD VISION Engine Control Center Double-click the icon in the Windows taskbar notification area (or right-click the icon and select AMD VISION Engine Control Center).
  • Page 60 Quick Start Guide Click the Preferences button and select either Advanced View or Standard View. The menu headings allow you to select which items you wish to change. Advanced View Standard View Figure 1 - 20 - AMD VISION Engine Control Center 1 - 30 Video Features...

  • Page 61: Power Options

    Quick Start Guide Power Options The Power Options (Hardware and Sound menu) control panel icon in Windows (see page 1 - 26 or see pendix E for information on the Windows 8 OS) allows you to configure power management features for your computer.
  • Page 62 Quick Start Guide 1 - 32...

  • Page 63: Features & Components Overview

    Features & Components Chapter 2: Features & Components Overview Read this chapter to learn more about the following main features and components of the computer: • Hard Disk Drive • Optical (CD/DVD) Device • Multi-In-1 Card Reader • Touchpad and Buttons/Mouse •...

  • Page 64: Hard Disk Drive

    Features & Components Hard Disk Drive  The hard disk drive is used to store your data in the computer. The hard disk can be Power Safety taken out to accommodate other serial (SATA) hard disk drives (see “Storage” on page D - 3 for specification information).

  • Page 65: Optical (Cd/Dvd) Device

    Features & Components Optical (CD/DVD) Device  There is a bay for a 5.25" optical (CD/DVD) device (12.7mm height). The actual de- Sound Volume vice will depend on the module you purchased (see “Storage” on page D - 3). The Adjustment optical device is usually labeled “Drive D:”...

  • Page 66: Handling Cds Or Dvds

    Features & Components Handling CDs or DVDs  Proper handling of your CDs/DVDs will prevent them from being damaged. Please follow the advice below to make sure that the data stored on your CDs/DVDs can be CD Emergency Eject accessed. If you need to manually eject a CD (e.g.

  • Page 67: Dvd Regional Codes

    Features & Components DVD Regional Codes To change the DVD regional codes: Go to the Control Panel Double-click Device Manager (Hardware and Sound), then click the + next to DVD/CD-ROM drives. Double-click on the DVD-ROM device to bring up the Properties dialog box, and select the DVD Region (tab) to bring up the control panel to allow you to adjust the regional code.

  • Page 68: Multi-In-1 Card Reader

    Features & Components Multi-In-1 Card Reader  The card reader allows you to use some of the latest digital storage cards. Push the Card Reader Cover card into the slot and it will appear as a removable device, and can be accessed in the same way as your hard disk (s).

  • Page 69: Touchpad And Buttons/Mouse

    Features & Components Touchpad and Buttons/Mouse  The Touchpad is an alternative to the mouse; however, you can also add a mouse to Touchpad Scrolling your computer through one of the USB ports. The Touchpad buttons function in much the same way as a two-button mouse. This computer model se- ries may feature different Touchpad versions.

  • Page 70: Gestures And Device Settings

    Features & Components Gestures and Device Settings  The Synaptics Gestures Suite application allows you to use a specific gesture (ac- Show Video tion) on the surface of the Touchpad to perform specific actions to manipulate doc- uments, objects and applications. You can get a clearer view of the gestures in- You can configure the settings from the Device Settings tab in Mouse Properties:...
  • Page 71 Features & Components Smart Sense The Smart Sense feature helps prevent operating the Touchpad by accident, by rec- ognizing when your palm is resting on it or brushing its surface while you are typing. You can adjust the sensitivity of Smart Sense by moving the slider towards Max (to help remove undesired pointer movement or clicks) or Off (if it misses intended mo- tions or taps).
  • Page 72 Features & Components Scrolling The Two-Finger scrolling feature works in most scrollable windows and allows you to scroll horizontally and vertically. Place two fingers, slightly separated, on the Touchpad surface and slide both fingers in the direction required (in a straight con- Figure 2 - 8 tinuous motion).
  • Page 73 Features & Components Rotating Use the Pivot Rotate gesture to rotate objects (e.g. photos) in 90 degree increments. Place a finger down on the left “target” zone and keep it stationary. Place another finger near the middle of the Touchpad and slide it in a circular motion around the stationary finger (clockwise or counterclockwise) to rotate the object.

  • Page 74: Audio Features

    Features & Components Audio Features  You can configure the audio options on your computer from the Sound control Sound Volume panel in Windows, from the HD VDeck icon on the desktop or VIA HD Audio Adjustment Deck control panel The sound volume level is set using the volume The volume may also be adjusted by means of the Fn + F5/F6 key combination.
  • Page 75 Features & Components Expert Mode will allow you to access more advanced configuration menus for  Speaker, Microphone and Stereo Mix. Syncing Left & Right Volume Balance If you wish to adjust the left and right channel volume levels separately, you will need to adjust this from the VIA HD Audio Deck in Ex- pert Mode.
  • Page 76 Features & Components 2 - 14...

  • Page 77: Power Management Overview

    Power Management Chapter 3: Power Management  Overview OS Note Power management To conserve power, especially when using the battery, your computer power man- functions will vary slight- agement conserves power by controlling individual components of the computer ly depending on your (the monitor and hard disk drive) or the whole system.

  • Page 78: The Power Sources

    Power Management The Power Sources  The computer can be powered by either an AC/DC adapter or a battery pack. Silent Mode (Model A AC/DC Adapter Design I Only) Use only the AC/DC adapter that comes with your computer. The wrong type of AC/ Use the key (for DC adapter will damage the computer and its components.

  • Page 79: Turning On The Computer

    Power Management Turning On the Computer  Now you are ready to begin using your computer. To turn it on simply press the pow- Forced Off er button on the front panel. If the system “hangs”, When the computer is on, you can use the power button as a Stand by/Hibernate/ and the Ctrl + Alt + Del Shutdown hot-key button when it is pressed for less than 4 seconds (pressing and key combination doesn’t...

  • Page 80: Power Plans

    Power Management Power Plans  The computer can be configured to conserve power by means of power plans. You Resuming can use (or modify) an existing power plan, or create a new one. Operation The settings may be adjusted to set the display to turn off after a specified time, and Table 3 - 1, on to send the computer into Sleep after a period of inactivity.
  • Page 81 Power Management Each Windows power plan will also adjust the processor performance of your ma- chine in order to save power. This is worth bearing in mind if you are experiencing any reduced performance (especially under DC/battery power). Choose High performance (you may need to click Show additional plans to view the High performance plan) for maximum performance when the computer is pow- ered from an AC power source.

  • Page 82: Power-Saving States

    Power Management Power-Saving States You can use power-saving states to stop the computer’s operation and restart where you left off. Win 7 uses the Sleep, Hibernate and Shut Down power-saving states. Sleep In Sleep all of your work, settings and preferences are saved to memory before the system sleeps.

  • Page 83: Hibernate

    Power Management Hibernate  Hibernate uses the least amount of power of all the power-saving states and saves all of your information on a part of the hard disk before it turns the system off. If a Silent Mode power failure occurs the system can restore your work from the hard disk; if a power (Model A Design I Only) failure occurs when work is saved only to memory, then the work will be lost.

  • Page 84: Configuring The Power Buttons

    Power Management Configuring the Power Buttons  The power/sleep button (Fn + F4 key combo) and closed lid may be set to send the Password computer in to a power-saving state. Click Choose what the power buttons do on Protection the left menu in Power Options to bring up the menu.

  • Page 85: Resuming Operation

    Power Management Resuming Operation  You can resume operation from power-saving states by pressing the power button, or in some cases pressing the sleep button (Fn + F4 key combo). Closing the Lid Power Status To Resume Icon Color If you have chosen to send the computer to Power Off Press the Power Button...

  • Page 86: Power Conservation Modes

    Power Management Power Conservation Modes  This system supports Energy Star power management features that place comput- ers (CPU, hard drive, etc.) into a low-power sleep modes after a designated period Power Conservation of inactivity. Adjust Power Conservation Modes from the Control Center: Modes The Energy Star setting Press the Fn + Esc key combination to toggle the Control Center on/off.

  • Page 87: Battery Information

    Power Management Battery Information  Follow these simple guidelines to get the best use out of your battery. Low Battery Battery Power Warning Your computer’s battery power is dependent upon many factors, including the pro- When the battery is criti- grams you are running, and peripheral devices attached.

  • Page 88: Conserving Battery Power

    Power Management Conserving Battery Power  • Use a power plan that conserves power (e.g Power saver), however note that this may have an affect on computer performance. Windows Mobility Center • Lower the brightness level of the LCD display. The system will decrease LCD brightness slightly to save power when it is not powered by the AC/DC adapter.

  • Page 89: Battery Life

    Power Management Battery Life Battery life may be shortened through improper maintenance. To optimize the life and improve its performance, fully discharge and recharge the battery at least once every 30 days. We recommend that you do not remove the battery yourself. If you do need to re- move the battery for any reason see “Removing the Battery”...

  • Page 90: Proper Handling Of The Battery Pack

    Power Management Proper handling of the Battery Pack  • DO NOT disassemble the battery pack under any circumstances • DO NOT expose the battery to fire or high temperatures, it may explode Caution • DO NOT connect the metal terminals (+, -) to each other Danger of explosion if battery is incorrectly re- placed.

  • Page 91: Battery Faq

    Power Management Battery FAQ How do I completely discharge the battery? Use the computer with battery power until it shuts down due to a low battery. Don’t turn off the computer even if a message indicates the battery is critically low, just let the computer use up all of the battery power and shut down on its own.
  • Page 92 Power Management Click Change plan settings (after creating it) and click Change plan settings > Change advanced power settings. Figure 3 - 9 Change Plan Settings / Change Advanced Power Settings 3 - 16 Battery Information...
  • Page 93 Power Management Scroll down to Battery and click + to expand the battery options. Choose the options below (click Yes if a warning appears): Figure 3 - 10 Power Options Advanced Settings - Battery • Low battery levels = 0% •...
  • Page 94 Power Management How do I fully charge the battery? When charging the battery, don’t stop until the LED charging indicator light changes from orange to green. How do I maintain the battery? Completely discharge and charge the battery at least once every 30 days or after about 20 partial discharges.

  • Page 95: Drivers & Utilities

    Drivers & Utilities Chapter 4: Drivers & Utilities  Driver Installation & This chapter deals with installing the drivers and utilities essential to the operation or Power improvement of some of the computer’s subsystems. The system takes advantage of some newer hardware components for which the latest versions of most available op- When installing driv- erating systems haven’t built in drivers and utilities.

  • Page 96: Driver Installation

    Drivers & Utilities Driver Installation Check the driver installation order from Table 4 - 1, on page 4 - 3 (the drivers must be installed in Insert the Device Drivers & Utilities + User’s Manual this order) which is the same as that listed in the disc and click Install Drivers (button), or Option Driv- Drivers Installer menu below.
  • Page 97 Drivers & Utilities Win 7 SP1/Win 8 Driver Page # Win 7 SP1/Win 8 Driver Page # PC Camera Module Video (VGA) Page 4 - 6 Page 7 - 3 (Only 14.0” / 35.56cm Model A computers require a camera driver for Windows 8) Page 4 - 6 Wireless LAN Module Page 7 - 11...

  • Page 98: Updating/Reinstalling Individual Drivers

    Drivers & Utilities Manual Driver Installation Updating/Reinstalling Individual Drivers Click Browse CD/DVD (button) in the Drivers Install- If you wish to update/reinstall individual drivers it er application and browse to the executable file in the may be necessary to uninstall the original driver.To do appropriate driver folder.

  • Page 99: User Account Control

    Drivers & Utilities User Account Control New Hardware Found If a User Account Control prompt appears as part of If you see the message “New Hardware Found” dur- the driver installation procedure, click Continue or ing the installation procedure (other than when out- Allow, and follow the installation procedure as direct- lined in the driver install procedure), click Cancel to close the window, and follow the installation proce-...

  • Page 100: Driver Installation Procedure

    Drivers & Utilities Driver Installation Procedure Insert the Device Drivers & Utilities + User’s Manual 1. Click 2.Install LAN Driver > Yes. disc and click Install Drivers (button). 2. Click Next > Install > Finish. Video (VGA) CardReader 1. Click 1.Install VGA Driver > Yes. 1.

  • Page 101: Audio

    Drivers & Utilities Audio  1. Click 6.Install Audio Driver > Yes. 2. Click Next. Windows Update 3. Click the button to agree to the license agree- After installing all the drivers make sure you enable Win- ment and click Next. dows Update in order to get all the latest security up- dates etc., (all updates will include the latest hotfixes 4.

  • Page 102: Windows Experience Index

    Drivers & Utilities Windows Experience Index Optional Drivers After the drivers are installed follow this procedure to See the pages indicated for the driver installation pro- ensure an accurate rating from the Windows Experi- cedures for any modules included in your purchase op- ence Index (make sure the AC/DC adapter is plugged tion.

  • Page 103: Bios Utilities Overview

    BIOS Utilities Chapter 5: BIOS Utilities  Overview BIOS Screens Note that BIOS This chapter gives a brief introduction to the computer’s built-in software: screens pictured these pages are intend- If your computer has never been set up, or you are making important changes to the ed for guidance in set- system (e.g.

  • Page 104: The Setup Utility

    BIOS Utilities The Setup Utility  Each time you turn on the computer the system takes a few seconds to conduct a BIOS Settings POST, including a quick test of the on-board RAM (memory). Warning As the POST proceeds, the computer will tell you if there is anything wrong. If there Incorrect settings can is a problem that prevents the system from booting, it will display a system summary cause your system to...

  • Page 105: Failing The Post

    BIOS Utilities Failing the POST Errors can be detected during the POST. There are two categories, “fatal” and “non- fatal”. Fatal Errors These stop the boot process and usually indicate there is something seriously wrong with your system. Take the computer to your service representative or authorized distributor/supplier as soon as possible.

  • Page 106: Setup Screens

    BIOS Utilities Setup Screens  The following pages contain additional advice on portions of the Setup. Along the top of the screen is a menu bar with menu headings. When you select a heading, a Setup Menus new screen appears. Scroll through the features listed on each screen to make chang- Setup menus es to Setup.

  • Page 107: Main Menu

    BIOS Utilities Main Menu Figure 5 - 2 Main Menu System Time & Date (Main Menu) The hour setting uses the 24-hour system (i.e., ØØ = midnight; 13 = 1 pm). If you can change the date and time settings in your operating system, you will also change these settings.
  • Page 108 BIOS Utilities SATA Port # (Main Menu) Pressing Enter opens the sub-menu to show the configuration of a optical Device/ HDD on the computer’s SATA Ports. System/Extended Memory: (Main Menu) This item contains information on the system memory, and is not user configurable. The system will auto detect the amount of memory installed.

  • Page 109: Advanced Menu

    BIOS Utilities Advanced Menu Figure 5 - 3 Advanced Menu Advanced Chipset Control (Advanced Menu) The sub-menu here allows you to adjust the Bluetooth Power Setting. Advanced Menu 5 - 7...
  • Page 110 BIOS Utilities Bluetooth Power Setting (Advanced Menu > Advanced Chipset Control)  You can adjust the Bluetooth module power setting to your preference. The default setting (Disabled) will see the Bluetooth module powered off when the system is SATA Mode started up or restarted.

  • Page 111: Security Menu

    BIOS Utilities Security Menu  Security Menu The changes you make here affect the access to the Setup utility itself, and also access to your machine as it boots up after you turn it on. These settings do not affect your machine or network passwords which will be set in your...
  • Page 112 BIOS Utilities Set User Password (Security Menu)  You can set a password for user mode access to the Aptio Setup Utility. This will not affect access to the computer OS, (only the Setup utility) unless you choose to Password Warning set a Password on Boot (see below).
  • Page 113 BIOS Utilities Secure Boot (Security Menu) Secure Boot prevents unauthorized operating systems and software from loading during the startup process. Secure Boot is available as a menu option if you have Windows 8 set as your operating system, and have enabled UEFI Boot (see “Boot Menu”...
  • Page 114 BIOS Utilities TPM Configuration (Security Menu) This sub-menu will allow you to enable/disable Trusted Platform Module (TPM) support, and to configure the TPM State. Select TPM Configuration and press En- ter to access the sub-menu. Press Enter to access the Security Device Support menu and select Enable to display the full TPM configuration menu (see “Trusted Plat- form Module”...
  • Page 115 BIOS Utilities TPM State (Security Menu > TPM Support Enabled) Select TPM State, press Enter and select Enable to change the TPM state to en- abled. You will then need to press F4 to save the changes and restart the computer. Figure 5 - 6 TPM State (Enabled) As the computer restarts press F2 to enter the BIOS again and go to the TPM Con-...
  • Page 116 BIOS Utilities Pending TPM operation (Security Menu > TPM Support & TPM State Enabled) Select Pending operation, press Enter and select the option you require (if you are initializing TPM you should select Enable Take Ownership). You will then need to press F4 to save the changes and restart the computer.

  • Page 117: Boot Menu

    BIOS Utilities Boot Menu Figure 5 - 8 Boot Menu  BIOS Screens Note that BIOS screens pictured these pages are intend- ed for guidance in set- ting up your system’s BIOS. BIOS versions are sub- ject to constant change When you turn the computer on it will look for an operating system (e.g.
  • Page 118 BIOS Utilities Boot Option Priorities (Boot Menu) Press Enter to select the Boot Option # and use the keys to move any de- vice’s boot priority up and down the list (the selected device will be highlighted in white). OS Select (Boot Menu) This item tells allows you to set the operating system you intend to use.

  • Page 119: Exit Menu

    BIOS Utilities Exit Menu Figure 5 - 9 Exit Menu Click Save Changes and Reset to save all changes made. Choosing to Discard Changes, or Exit Discarding Changes, will wipe out any changes you have made to the Setup. You can also choose to restore the original Setup defaults that will re- turn the Setup to its original state, and erase any previous changes you have made in a previous session.
  • Page 120 BIOS Utilities 5 - 18...

  • Page 121: Upgrading The Computer Overview

    Upgrading The Computer Chapter 6: Upgrading The Computer Overview  This chapter contains information on upgrading the computer. Follow the steps out- Warranty Warning lined to make the desired upgrades. If you have any trouble or problems you can con- Please check with your ser- tact your service representative for further help.

  • Page 122: When Not To Upgrade

    Upgrading The Computer When Not to Upgrade  These procedures involve opening the system’s case, adding and sometimes replac- ing parts. Power Safety Warning You should not perform any of these upgrades if: Before you undertake upgrade proce- • Your system is still under warranty or a service contract dures, make sure that you have turned off the •...
  • Page 123 Upgrading The Computer Upgrading the Processor If you want to upgrade your computer by replacing the existing processor with a fast- er/new one you will need to contact your customer service representative. We rec- ommend that you do not do this yourself, since if it is done incorrectly you may damage the processor or mainboard.

  • Page 124: Removing The Battery

    Upgrading The Computer Removing the Battery  If you are confident in undertaking upgrade procedures yourself, for safety reasons Warranty Warning it is best to remove the battery. Please check with your Turn the computer off, and turn it over. service representative Slide the latch...

  • Page 125: Upgrading The Hard Disk Drive

    Upgrading The Computer Upgrading the Hard Disk Drive  The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard HDD System disk drives with a height of 9.5mm (h) (see “Storage” on page D - 3).
  • Page 126 Upgrading The Computer Turn off the computer, and turn it over and remove the battery. Locate the hard disk bay cover and loosen screws & Remove the hard disk bay cover Model C Model A Figure 6 - 2 Hard Disk Bay Cover Removal Model B 6 - 6 Upgrading the Hard Disk Drive...
  • Page 127 Upgrading The Computer Grip the tab and slide the hard disk in the direction of arrow  Lift the hard disk out of the bay Remove the screw(s) and the adhesive cover Reverse the process to install a new hard disk drive (do not forget to replace all the Hard Disk Screws &...

  • Page 128: Upgrading The Optical (Cd/Dvd) Device

    Upgrading The Computer Upgrading the Optical (CD/DVD) Device The procedure for removing the optical device will depend upon your particular computer model: • See “Removing the Optical Device for Model A Computers” on page 6 - • See “Removing the Optical Device for Model B/C Computers” on page 6 - 6 - 8 Upgrading the Optical (CD/DVD) Device...

  • Page 129: Removing The Optical Device For Model A Computers

    Upgrading The Computer Removing the Optical Device for Model A Computers  Turn off the computer, and turn it over and remove the battery. Locate the component bay cover and remove screws Fan Cable & Cover Carefully (a fan and cable are attached to the under side of the cover) lift up Make sure you recon- the bay cover.
  • Page 130 Upgrading The Computer Remove the screw at point , and use a screwdriver to carefully push out the optical device at point Reverse the process to install the new device. Figure 6 - 5 Removing the Optical Device (Model A Computers) 6 - 10 Upgrading the Optical (CD/DVD) Device...

  • Page 131: Removing The Optical Device For Model B/C Computers

    Upgrading The Computer Removing the Optical Device for Model B/C Computers Turn off the computer, and turn it over and remove the battery. Remove the hard disk (see page Remove the screw at point , and use a screwdriver to carefully push out the optical device at point Reverse the process to install the new device.

  • Page 132: Upgrading The System Memory (Ram)

    Upgrading The Computer Upgrading the System Memory (RAM)  This series of computers has two memory sockets, for 204 pin Small Outline Dual Fan Cable & Cover In-line (SO-DIMM) DDRIII (DDR3) type memory modules (see “Memory” on page D - 2 for details of supported module types).
  • Page 133 Upgrading The Computer Carefully (a fan and cable are attached to the under side of the cover) lift up the bay cover. Carefully disconnect the fan cable , and remove the cover Model A Figure 6 - 8 Bottom Cover Removal Model B Model C...
  • Page 134 Upgrading The Computer Gently pull the two release latches on the sides of the memory socket in the direction indicated by the arrows ( & Figure 6 - Figure 6 - 9 RAM Module Release The RAM module will pop-up, and you can remove it. Pull the latches to release the second module if necessary.
  • Page 135 Upgrading The Computer 11. Replace the bay cover by aligning the cover pins (see sidebar - make sure you  reconnect the fan cable before screwing down the bay cover). 12. Restart the computer to allow the BIOS to register the new memory configuration Cover Pins as it starts up.
  • Page 136 Upgrading The Computer 6 - 16...

  • Page 137: Modules & Options Overview

    Modules & Options Chapter 7: Modules & Options  Overview Wireless Device Operation Aboard Aircraft This chapter contains information on the following modules, which may come with your computer, depending on the configuration purchased. If you are unsure please The use of any portable contact your service representative.
  • Page 138 Modules & Options  Important Notice If your purchase option includes both Wireless LAN and 3G modules, then the appropriate antennas will be installed. Note that In order to comply with FCC RF exposure compliance requirements, the antenna must not be co-located or operate in conjunction with any other antenna or transmitter.

  • Page 139: Pc Camera Module

    Modules & Options PC Camera Module  Before installing the PC Camera driver, make sure that the optional PC Camera is Latest PC Camera on. Use the Fn + F10 key combination (see “Function/Hot Key Indicators” on Driver Information page 1 - 18) to toggle power to the PC Camera module.

  • Page 140: Pc Camera Driver Installation

    Modules & Options PC Camera Driver Installation  1. Make sure the module is powered on, and then insert the Device Drivers & Utilities + User’s Manual disc into the CD/DVD drive. PC Camera Screen 2. Click Option Drivers (button). Refresh 3.
  • Page 141 Modules & Options PC Camera Audio Setup If you wish to capture video & audio with your camera, it is necessary to setup the audio recording options in Windows. Click Start, and click Control Panel (or point to Settings and click Control Panel). Click Sound (Hardware and Sound).
  • Page 142 Modules & Options Figure 7 - 1 Audio Setup for PC Camera Right-click 7 - 6 PC Camera Module...
  • Page 143 Modules & Options Camera Application The camera application is a video viewer for general purpose video viewing and test- ing, and for capturing video files to .avi format. Run the camera application from the desktop shortcut (it is recommended that you set the capture file before the capture process - see Set Capture File below).
  • Page 144 Modules & Options Reducing Video File Size Note that capturing high resolution video files requires a substantial amount of disk space for each file. After recording video, check the video file size (right-click the file and select Properties) and the remaining free space on your hard disk (go to My Computer, right-click the hard disk, and select Properties).
  • Page 145 Modules & Options Eliminating Screen Flicker  If you find that the video screen in the camera program is flickering, you can try to adjust the setting in the Video Capture Filter options. Latest PC Camera Driver Information Run the camera application from the desktop shortcut. Go to Options and scroll down to select Video Capture Filter..
  • Page 146 Modules & Options Taking Still Pictures  The camera application allows you to take still pictures. Snapshot Folder Run the camera application from the desktop shortcut. Go to Options and select Take Picture. The Snapshot folder’s The picture (in JPEG format) will be placed in the Snapshot folder on the default location is on the desktop.

  • Page 147: Wireless Lan Module

    Modules & Options Wireless LAN Module  If you have included a Wireless LAN (or WLAN & Bluetooth combo) module in Wireless Device your purchase option, make sure that the module is on before installing the driver. Operation Aboard “Wireless LAN Settings (Windows 8)” on page E - 30 for Windows 8 configu- Aircraft ration information.

  • Page 148: B/G/N Driver Installation (For Wlan Module Only)

    Modules & Options 802.11b/g/n Driver Installation (for WLAN Module Only) See over for information on installing the drivers for the WLAN & Bluetooth com- bo module. If you see the message “Found New Hardware” click Cancel to close the window. 1.

  • Page 149: B/G/N Driver Installation (For Combo Modules)

    Modules & Options 802.11b/g/n Driver Installation (for Combo Modules) If you see the message “Found New Hardware” click Cancel to close the window. 1. Make sure the module is powered on, and then insert the Device Drivers & Utilities + User’s Manual disc into an attached DVD drive. 2.

  • Page 150: Connecting To A Wireless Network In Windows 7

    Modules & Options Connecting to a Wireless Network in Windows 7  Make sure the Wireless LAN module is turned on. Network and Click the notification area wireless icon , and then double-click an access point Sharing Center to connect to or click to Open Network and Sharing Center if you do not see a network you want to connect to in the notification area menu (a list of options will You can also use the Net- appear allowing setting changes, and creating a new network).
  • Page 151 Modules & Options You may need to enter a security key for any access point to which you are trying to connect. Click to select a network location (e.g. Home, Work or Public). Click “View or change settings in Network and Sharing Center” to access further options for the connection.
  • Page 152 Modules & Options Click the notification area icon to see any currently connected networks.  To disconnect from the wireless network you can click the notification area wireless icon , click the active connection and then click Disconnect (button). Security Enabled Networks You should try to make sure that any network you are...

  • Page 153: Windows Mobility Center

    Modules & Options Windows Mobility Center The Windows Mobility Center control panel provides an easy point of access for information on battery status, power plans used and wireless device status etc. To access the Windows Mobility Center: Click Start, and click Control Panel (or point to Settings and click Control Panel).

  • Page 154: Bluetooth & Wireless Lan Combo Module

    Modules & Options Bluetooth & Wireless LAN Combo Module  If your purchase option includes the Bluetooth Combination & Wireless LAN Wireless Device module then install the driver as instructed (see “Bluetooth Settings (Windows 8)” Operation Aboard on page E - 37 for instructions on Bluetooth settings for Windows 8).

  • Page 155: Bluetooth (V4.0) & Wlan Combo Driver Installation

    Modules & Options Bluetooth (V4.0) & WLAN Combo Driver Installation 1. Before installing the driver make sure the Bluetooth module is powered on (use Fn + F12 key combination), then insert the Device Drivers & Utili- ties + User’s Manual disc into the CD/DVD drive. If a Found New Hard- ware window appears, click Cancel in all windows that appear, and then proceed to install the driver as below.

  • Page 156: Standard Bluetooth Configuration In Windows 7

    Modules & Options Standard Bluetooth Configuration in Windows 7  Setup your Bluetooth Device so the Computer Can Find it Turn your Bluetooth device (e.g. PDA, mobile phone etc.) on. Add a Device Make the device discoverable (to do this check your device documentation). Click Start, and click Con- trol Panel and then click To Turn the Bluetooth Module On...
  • Page 157 Modules & Options To Add a Bluetooth Device  Access the Bluetooth Devices control panel and click Add a device. Double-click the device you want to pair with the computer. Pairing Options If a device has been pre- viously connected then the pairing option menu will appear when you at- tempt subsequent con-...
  • Page 158 Modules & Options Enter the code into your Bluetooth enabled device and follow any on-screen instructions to complete the pairing.  Figure 7 - 9 Pairing Codes Pairing Code Example The example outlined here shows a connection to a mobile device. Other devices e.g. computers, may have a slightly different connection proce- dure, and may require you to confirm a pairing code is correct on both devices.
  • Page 159 Modules & Options To Change Settings for the Bluetooth Device  Click the notification area icon and select Show Bluetooth Devices. Right-click on the device you want to change and click Properties to: Bluetooth Help • Change the name of the device (click Bluetooth, type a new name and click OK). •...

  • Page 160: 3G Module

    Modules & Options 3G Module  (For Models A & B Only) 3G Module Options If you have included an optional UMTS/HSPDA OR UMTS/HSPDA+ based 3G Module (Universal Mobile Telecommunications System or High Speed Packet Ac- There are two optional cess) module (see “Communication”...
  • Page 161 Modules & Options Turn off the computer, and turn it over and remove the battery (see page Locate the 3G USIM card cover and loosen screw , and then remove the USIM card cover Figure 7 - 12 USIM Card Cover Removal ...
  • Page 162 Modules & Options Lock the SIMLOCK by pushing it in the direction of the arrow in Figure 7 - 14 until it clicks into the lock position. Figure 7 - 14 SIMLOCK Lock  3G Modules & System Wake Up Note that the 3G mod- ules DO NOT support system wake up on 3G...
  • Page 163 Modules & Options Before installing the application, make sure that the 3G module is ON (installing  the driver with the module off will not allow the software to detect the module hard- ware correctly). Use the Fn + key combination (see Table 1 - 4, on page 1 - 3G Modules &...

  • Page 164: Wireless Manager

    Modules & Options Wireless Manager  With the 3G module and USIM card (supplied by your service provider) installed you may then install the Wireless Manager application. The Wireless Manager Wireless Device application allows you to directly access your HSPA internet service from the com- Operation Aboard Aircraft puter.

  • Page 165: Wireless Manager Application

    Modules & Options Wireless Manager Application  The connection information is stored on the USIM card supplied by the service pro- vider (where this is not the case you may need to create a profile - see “Creating a PIN Number Profile”...
  • Page 166 Modules & Options The system will connect to your network.  Connected will appear above the timer icon (the timer will indicate your connected time for the current session) Wireless Manager You can then access the internet, download e-mail etc. as per any internet Help connection.
  • Page 167 Modules & Options Click the Wireless Manager notification area icon to view the connection status, or wireless icon to view the Mobile Broadband Connection status Figure 7 - 17 Notification Area Icons (Connected)  Notification Area The indicator will display the signal strength and radio access Icon technology.

  • Page 168: Profiles

    Modules & Options Profiles Access the Wireless Manager application from the Start menu (Start > All Pro- grams > Wireless Manager > Wireless Manager) or the desktop shortcut Click the Settings > Advanced. Click the Profiles (tab). Figure 7 - 18 Advanced Settings - Profiles 7 - 32 3G Module...
  • Page 169 Modules & Options Multiple profiles may be available from the USIM card and the first time the application starts it may require you to select a profile (Set Profile) to use for your connection. Figure 7 - 19 Multiple Profiles Found Automatic Profile Selection If Automatic selection is chosen, then the application will search the operator pro-...
  • Page 170 Modules & Options Selecting a Profile Click Manual selection (button). Click the Filter to view the drop-down list. Select the Profile you wish to use and click Apply to confirm the selection. Figure 7 - 20 Profile - Manual Selection (Filter) 7 - 34 3G Module...
  • Page 171 Modules & Options Creating a Profile  Click Manual selection (button). Click the New. Deleting a Profile Enter a name you prefer for the profile. Enter the Access Point Name (APN). To delete a profile click Enter the User Name and Password if required (some service providers may not to select Manual selec- require this information and the fields may then be left blank).

  • Page 172: Settings

    Modules & Options Settings The Settings tab allows you at adjust the application features. Click to put a tick in Launch Wireless Manager at Windows startup to launch the application at Win- dows Startup. Figure 7 - 22 Settings The Advanced settings allows more detailed configuration. To access the Ad- vanced settings: Access the Wireless Manager program from the Start menu (Start >...
  • Page 173 Modules & Options  Most USIM cards are protected by a Personal Identity Number (PIN). You may turn on or off the Request PIN at startup (click Apply to save any changes). You can PIN Notes also Change PIN (you will need to enter the new PIN in the two fields provided and click Apply to save any changes).
  • Page 174 Modules & Options Networks  The mobile network list lists available networks at your location, and allows you to select a network which to connect. You must disconnect before being able to select Warning a network. Note that some applica- tions automatically Connection...

  • Page 175: Text Messaging Service (Sms)

    Modules & Options Text Messaging Service (SMS) In addition to standard internet services you may also send and receive SMS text messages using the Wireless Manager, if your service supports SMS. SMS Utility Access the Wireless Manager application from the Start menu (Start > All Pro- grams >...
  • Page 176 Modules & Options Messages Click the Messages tab to access the tabs displaying text messages. The tabs at the top of the menu display the Inbox, Drafts, Outbox, Sent and Trash menus. Inbox Drafts Outbox Sent Trash Figure 7 - 26 SMS Utility Messages Text messages are automatically saved to your computer and may be sorted in as-...

  • Page 177: Sending A Text Message

    Modules & Options Sending a Text Message Access the Wireless Manager application from the Start menu (Start > All Pro- grams > Wireless Manager > Wireless Manager) or the desktop shortcut Click SMS and the SMS Utility will then start. Click the New Message tab.
  • Page 178 Modules & Options Click Send to send the message or Save to save the message in the Drafts folder. Clicking the Clear icon clears both the Message and To fields. If radio is on then the message will be sent, however if the radio is off the message will be stored in the Outbox.
  • Page 179 Modules & Options Messages • Opening a text message: Double-click the message and the message will open in a new window (to close it click the close icon in the top right of the message). Figure 7 - 29 Click to close the message Close Message •...

  • Page 180: Phonebook

    Modules & Options Phonebook The Phonebook allows you to view and edit all your frequently used contacts, and is divided into Contacts and Groups . To access the Phonebook: Access the Wireless Manager application from the Start menu (Start > All Pro- grams >...
  • Page 181 Modules & Options Contacts  • New Contact: Click the New contact button to create a contact. Add the name and at least one phone number (Mobile, Work, Home and Other Import/Export fields are available) for the contact. Click the icon to expand the number Contacts details.
  • Page 182 Modules & Options Groups You can organize existing contacts into groups from the Groups tab. • New Group: Click the New group button to create a group. Click icon to expand the group details, and click a check box to add at least one phone number from the contacts for the group.

  • Page 183: Sms Settings

    Modules & Options SMS Settings The SMS Utility Settings tab allows you at adjust the SMS features. Figure 7 - 33 SMS Utility Settings  SMS Settings Message Length: You can set the number of blocks that can be sent (up to a length of 10 blocks).
  • Page 184 Modules & Options Send Click Delivery Report to automatically request a reply from a recipient. If you click to Send messages in Outbox automatically upon connection then messages writ- ten when the radio is off, will then be sent automatically the next time radio is turned on.
  • Page 185 Modules & Options Number You can choose to Use default service center number or you can uncheck the box and add your number manually if your service provider supplies a different number (click Apply to save the change or Default to return to the default number). Memory Phonebook memory status displays the number of contacts displayed on the USIM card.

  • Page 186: Sierra Wireless Aircard Watcher

    Modules & Options Sierra Wireless AirCard Watcher  With the 3G module and USIM card (supplied by your service provider) installed you may then install the Sierra Wireless AirCard Watcher application. AirCard Wireless Device Operation Aboard Watcher allows you to directly access your internet service from the computer. Aircraft Sierra Wireless AirCard Watcher Installation The use of any portable...

  • Page 187: Aircard Watcher Application

    Modules & Options AirCard Watcher Application  The connection information is stored on the USIM card supplied by the service pro- vider (where this is not the case you may need to create a profile - see “Profiles” on PIN Number page 7 - 57).
  • Page 188 Modules & Options The system will connect to your network.  The icon will turn green (and the upload/download speeds will be indicated). You can then access the internet, download e-mail etc. as per any internet AirCard Watcher connection. Help Topics To get help on AirCard Watcher configuration...
  • Page 189 Modules & Options When connected the uplink/downlink speeds will be indicated.  You can also click the Speed Graph icon to get a visual display of the uplink/ downlink speeds. 10. While connected you can also click the icon in the notification area of the Roaming taskbar to display the Windows 7 Mobile Broadband connection status.
  • Page 190 Modules & Options 11. To disconnect from the service provider, click the Disconnect button  (note that if you click the close icon at the top right of the screen the application will close however the connection will still be maintained). Online Help 12.

  • Page 191: Air Card Watcher Menu

    Modules & Options Air Card Watcher Menu  Right-click the menu button at the top of the AirCard Watcher screen to bring up the menu, and click to select any item required. Airplane Mode Click on the Airplane Mode icon to turn the ra- dio power off (e.g.

  • Page 192: Selecting A Network Operator/Service Provider

    Modules & Options Selecting a Network Operator/Service Provider  In most cases all your network operator/service provider details will be stored on your USIM card, and will not need to be edited/modified. If you do need to set up a Network Operator network operator/service provider follow these instructions.

  • Page 193: Profiles

    Modules & Options Profiles A profile contains information used to establish a data connection, and this informa- tion is usually stored on the USIM card supplied by your service provider. However you can create, edit or delete profiles if required. Creating a Profile Access the AirCard Watcher application from the Start menu (Start >...
  • Page 194 Modules & Options You will need to complete the fields for Profile name, Username, Password and  Access Point Name (you will need to get the username and password details from your service provider). Edit or Delete Once you have added the details above you can click the Profiles heading menu Profiles and click to select the profile from the Selected Profile dropdown menu and then click OK to set the profile as the default connection.

  • Page 195: User Options

    Modules & Options User Options You can configure User Options as follows. Access the AirCard Watcher application from the Start menu (Start > All Pro- grams > Sierra Wireless > AirCard Watcher) or the desktop shortcut Either click the menu button and select Options, or click the Options button from the main program window.
  • Page 196 Modules & Options • General - This item allows you to set options for Startup/Shutdown, Warning Messages, Display and Windows support. • Messaging - Set options here for SMS settings. • Network - Configure the network settings from this menu though your fre- quency band information is usually stored on the USIM card.

  • Page 197: Text Messaging Service (Sms)

    Modules & Options Text Messaging Service (SMS) In addition to standard internet services you may also send and receive SMS text messages using AirCard Watcher, if your service supports SMS. SMS Express Access the AirCard Watcher application from the Start menu (Start > All Pro- grams >...

  • Page 198: Sending A Text Message

    Modules & Options Sending a Text Message  Access the AirCard Watcher application from the Start menu (Start > All Pro- grams > Sierra Wireless > AirCard Watcher) or the desktop shortcut Sent Messages Either click the menu button and select SMS Express, or click the SMS Express button from the main program window.

  • Page 199: Inbox

    Modules & Options Inbox Any received text messages will be displayed in the Inbox. The number of total mes- sages and unread messages will be displayed in the inbox folder title. Messages • Opening a text message: Click on any message in the Inbox to read it in the bottom panel of the window.

  • Page 200: Trusted Platform Module

    Modules & Options Trusted Platform Module The TPM security chip allows you to create and manage digital certificates for user and platform authentication. This type of security is usually administered within large enterprises and organizations, and therefore requires implementation by a sys- tem administrator before users can access security features.

  • Page 201: Enabling & Activating Tpm

    Modules & Options Enabling & Activating TPM Restart the computer. Enter the Aptio Setup Utility pressing F2 during the POST/startup. Use the arrow keys to select the Security menu Select TPM Configuration and press Enter. Select TPM Support and press Enter, select Enable and press Enter. Select TPM State, press Enter and select Enabled to change the TPM state to enabled.
  • Page 202 Modules & Options Select Pending TPM operation, press Enter and select the option you require (if you are initializing TPM you should select Enable Take Ownership) and press Enter. You will then need to press F4 to save the changes and restart the computer.

  • Page 203: Trusted Platform Module (Tpm) Driver Installation

    Modules & Options Trusted Platform Module (TPM) Driver Installation 1. Make sure you have enabled and activated the TPM in the BIOS before installing the driver (if you do not do see the note below). 2. Insert the Device Drivers & Utilities + User’s Manual disc into the CD/ DVD drive.

  • Page 204: Initializing Tpm

    Modules & Options Initializing TPM Run the application from the Infineon Security Platform Solution > Manage Security Platform item in the Start > All Programs menu. Click User Settings (tab) and click Yes, or right-click the icon in the notification area of the taskbar, and select Security Platform Initialization (or click the Security Platform State taskbar bubble).
  • Page 205 Modules & Options Choose the Security Platform Features you want to use by clicking the appropriate tickbox. Enter a Basic User Password (and re-type to confirm it) and click Next. Figure 7 - 50 Settings  Help Right-click the icon the notification area of the taskbar to bring up the menu to select Help or How to use...

  • Page 206: Infineon Security Platform Settings Tool

    Modules & Options Infineon Security Platform Settings Tool  The Infineon Security Platform Settings Tool allows you to manage and check the TPM state, manage your password information, and to backup and restore the TPM Menus data. As TPM is usually administered within large enterprises and organizations, Note that not all the your system administrator will need to assist you in managing the information here.
  • Page 207 Modules & Options User Settings This page allows the settings to be configured for the currently logged in Infineon Security Platform user including the ability to change the password, configure se- cure e-mail, file and folder encryption and Enhanced Authentication. You can also import or delete certificates protected by the security platform.
  • Page 208 Modules & Options Backup Here you can configure backup and restore operations. Backup files contain the computer identification and user identification information which is used to match the machine name and user name with the current machine and user during restora- tion.
  • Page 209 Modules & Options Migration The Migration tab is used to help securely transfer keys and certificates from one platform to another. Figure 7 - 54 Infineon Security Platform Settings Tool (Migration) Trusted Platform Module 7 - 73...
  • Page 210 Modules & Options Password Reset Use Password Reset to reset basic user passwords when required. Figure 7 - 55 Infineon Security Platform Settings Tool (Password Reset) 7 - 74 Trusted Platform Module...
  • Page 211 Modules & Options BitLocker BitLocker Drive Encryption can be used in conjunction with the TPM to encrypt data on the disk and is done via the Microsoft BitLocker Control Panel Applet. Click Configure and select a drive to be encrypted and then follow the Wizard to begin the encryption process.
  • Page 212 Modules & Options Access the Microsoft BitLocker Drive Encryption control panel applet from the Windows control panel (System and Security). Figure 7 - 57 BitLocker Drive Encryption 7 - 76 Trusted Platform Module...
  • Page 213 Modules & Options Advanced Configure all the Security Platform owner and policy settings from the Advanced tab. The settings that can be changed are for the local computer only. Figure 7 - 58 Infineon Security Platform Settings Tool (Advanced) Trusted Platform Module 7 - 77...
  • Page 214 Modules & Options 7 - 78...

  • Page 215: Troubleshooting Overview

    Troubleshooting Chapter 8: Troubleshooting Overview Should you have any problems with your computer, before consulting your service representative, you may want to try to solve the problem yourself. This chapter lists some common problems and their possible solutions. This can’t anticipate every problem, but you should check here before you panic. If you don’t find the answer in these pages, make sure you have followed the instructions carefully and observed the safety precautions in the preface.

  • Page 216: Basic Hints And Tips

    Troubleshooting Basic Hints and Tips Many of the following may seem obvious but they are often the solution to a problem when your computer ap- pears not to be working. • Power - Is the computer actually plugged into a working electrical outlet? If plugged into a power strip, make sure it is actually working.

  • Page 217: Backup And General Maintenance

    Troubleshooting Backup and General Maintenance • Always backup your important data, and keep copies of your OS and programs safe, but close to hand. Don’t forget to note the serial numbers if you are storing them out of their original cases, e.g. in a CD wal- let.

  • Page 218: Viruses

    Troubleshooting Viruses • Install an Anti-Virus program and keep the definitions file (the file which tells your program which viruses to look for) up to date. New computer viruses are discovered daily, and some of them may seriously harm your computer and cause you to lose data. Anti-Virus programs are commercially available and the defini- tions file updates are usually downloadable directly from the internet.

  • Page 219: Upgrading And Adding New Hardware/Software

    Troubleshooting Upgrading and Adding New Hardware/Software • Do not be tempted to make changes to your Windows Registry unless you are very sure of what you are doing, otherwise you will risk severely damaging your system. • Don’t open your computer or undertake any repair or upgrade work if you are not comfortable with what you are doing.
  • Page 220 Troubleshooting • Thoroughly check any recent changes you made to your system as these changes may affect one or more system components, or software programs. If possible, go back and undo the change you just made and see if the problem still occurs. •...

  • Page 221: Problems And Possible Solutions

    Troubleshooting Problems and Possible Solutions Problem Possible Cause - Solution You turned on the power but it doesn’t Battery missing / incorrectly installed. Check the battery bay, make sure the work. battery is present and seated properly (the design of the battery only allows it to go in one way).
  • Page 222 Troubleshooting Problem Possible Cause - Solution The computer feels too hot. Make sure the computer is properly ventilated and the Vent/Fan intakes are not blocked. If this doesn’t cool it down, put the system into Hibernate mode or turn it off for an hour. Make sure the computer isn’t sitting on a thermal surface (see “Overheating”...
  • Page 223 Troubleshooting Problem Possible Cause - Solution You forget the boot password. If you forget the password, you may have to discharge the battery of the CMOS. Contact your service representative for help.  Password Warning If you choose to set a boot password, NEVER forget your password. The consequences of this could be serious. If you cannot remember your boot password you must contact your vendor and you may lose all of the information on your hard disk.
  • Page 224 Troubleshooting Problem Possible Cause - Solution I am sliding my finger up and down on the There are different Touchpad versions available on this computer, and this right side of the Touchpad to scroll a version requires tapping/holding to scroll. Either tap repeatedly, or hold the Window and the Touchpad does not finger down, at the top or bottom right of the Touchpad (depending on the respond.
  • Page 225 Troubleshooting Problem Possible Cause - Solution Wireless LAN/Bluetooth/3G The modules are off. Check the LED indicator and/or function key indicator modules cannot be detected. to see if the WLAN/Bluetooth/3G module is on or off (see “LCD Panel Open - Model C” on page 1 - 11).
  • Page 226 Troubleshooting Problem Possible Cause - Solution The Bluetooth module is off after The Bluetooth module’s default state will be off after resuming from the Sleep resuming from Sleep. power-saving state. Use the key combination (Fn + F12) to power on the Bluetooth module after the computer resumes from Sleep.

  • Page 227: Bluetooth Connection Problems

    Troubleshooting Bluetooth Connection Problems If you are experiencing problems connecting to some Bluetooth devices (in particular certain mobile phones and headsets) it maybe necessary to download and install the Windows Mobile Device Center software (for Win- dows Vista and Windows 7). Go to the Microsoft website and search for the Microsoft Windows Device Center Driver for Windows Vista (64-bit or 32-bit) and Windows 7 (64-bit or 32-bit), and then download the driver.
  • Page 228 Troubleshooting Right-click Bluetooth Peripheral Device and click on Update Driver Software. Click Browse my computer for driver software. Click Let Me pick from a list of device drivers on my computer. Figure 8 - 2 - Browse my computer.../Let me pick from... Select Bluetooth Radios from the list.
  • Page 229 Troubleshooting 10. A list of drivers will appear with Manufacturer on one side and Model in the other. 11. Choose Microsoft Corporation (make sure you choose the full name Microsoft Corporation and do not choose Microsoft - Note that you must have installed the Microsoft Windows Device Center Driver for Microsoft Corporation to appear in the list).
  • Page 230 Troubleshooting 15. The Device Manager should now display the Windows Mobile-based device support under Bluetooth Radios. 16. You will need to repeat the process for any other Bluetooth Peripheral Devices listed under Other Devices. Figure 8 - 5 - Device Manager - Bluetooth Radio 8 - 16 Bluetooth Connection Problems...

  • Page 231: Interface (Ports & Jacks) Overview

    Interface (Ports & Jacks) Appendix A: Interface (Ports & Jacks) Overview The following chapter will give a quick description of the interface (ports & jacks) which allow your computer to communicate with external devices, connect to the internet etc. Interface (Ports & Jacks) A - 1...

  • Page 232: Notebook Ports And Jacks

    Interface (Ports & Jacks) Notebook Ports and Jacks Item Description Card Reader The card reader allows you to use some of the latest digital storage cards. Push the card into the slot and it will appear as a removable device. DC-In Jack Plug the supplied AC/DC adapter into this jack to power your computer.
  • Page 233 Interface (Ports & Jacks) Item Description Microphone-In Jack Plug an external microphone in to this jack to record on your computer. RJ-45 LAN Jack This port supports LAN (Network) functions. Note: Broadband (e.g. ADSL) modems usually connect to the LAN port. Security Lock Slot To prevent possible theft, a Kensington-type lock can be attached to this slot.
  • Page 234 Interface (Ports & Jacks) A - 4...

  • Page 235: Control Center Overview

    Control Center Appendix B: Control Center Overview The following chapter will give a quick description of the functions of the Control Center. The Control Center gives quick access to frequently used controls, power management features and enables you to quickly turn mod- ules on/off.
  • Page 236 Control Center Power Modes You can set a Power Mode by clicking the appropriate icon at the top of the Control Center. Each power mode will affect the power status of modules (e.g. WLAN, Bluetooth, 3G or Camera), screen brightness, TouchPad power and Silent Mode.
  • Page 237 Control Center Flight User Modes Power Saving Entertainment Quiet Performance (Win 7 Only) Defined Icon Power Plan Power Saver Balanced Power Saving Power Saving High Performance Power Conservation Mode Energy Star BIOS Default Energy Star Energy Star Performance Brightness WLAN (Win 7 Only) Bluetooth BIOS Default...
  • Page 238 Control Center Power Status The Power Status icon will show whether you are currently powered by the battery, or by the AC/DC adapter plugged in to a working power outlet. The power status bar will show the current battery charge state. Brightness The Brightness icon will show the current screen brightness level.
  • Page 239 Control Center Sleep Click the Sleep button to bring up the Hibernate or Sleep buttons, and click either button to have the computer enter the appropriate power-saving mode (see “Power-Saving States” on page 3 - Display Switch Click the Display Switch button to access the menu (or use the + P key combination) and select the appro- priate attached display mode (see page 15).
  • Page 240 Control Center Silent Mode Click the Silent Mode button toggles silent mode on/off. You can use Silent Mode to reduce power consump- tion and fan noise. Note that the Silent Mode effected by the Power Mode selected. • Silent Mode is OFF •...

  • Page 241: Amd Video Driver Controls

    Appendix C: AMD Video Driver Controls  The basic settings for configuring the LCD are outlined in “Video Features” on page 1 - 28. For information on the Windows 8 operating system see Appendix Video Card Options Note that card types, spec- Video Driver Installation ifications and drivers are subject to continual up-...

  • Page 242: Amd Vision Engine Control Center

    AMD Vision Engine Control Center  Adjust the video settings from the AMD Control Center. Taskbar Icon Right-click the desktop and select AMD Vision Engine Control Center. The Control Center can also be accessed by dou- Click Advanced settings in the Screen Resolution control panel (see “Video ble-clicking the icon Features”...

  • Page 243: Amd Vision Engine Control Center Preferences

    AMD Vision Engine Control Center Preferences  The Preferences button in the control center menu allows you to configure the con- trol panel settings. You can view the control panel in either Standard View or Ad- Preferences & vanced View. To display Standard View or Advanced View: Views Open the control center.
  • Page 244 Standard View The Standard View menus feature a series of menu headings with clickable sub- menus which allow you to adjust Desktops and Displays, Power, Video, Gaming and Information. Click the Start button to access the top level menu from any sub- menu heading.
  • Page 245 Advanced View  The Advanced View menus display all the menu headings as a series of buttons on the left. Click the arrows in any button to display the sub-menus (note all the figures Sub-Menus in the remainder of this chapter are in Advanced View). Click a menu button to expand any sub-menus, and then click the appro-...
  • Page 246 The control center provides additional video configuration controls and tools which  allow quick access to features such as display options, 3D Settings, color, power and Information menus etc. Adjust settings from the options in the sub-menus. Help Menus Press F1 to bring up Help menu.

  • Page 247: Display Devices & Options

    Display Devices & Options  Besides the built-in LCD you can also use an external monitor/flat panel display/TV Function Key connected to the external monitor port or to the HDMI-Out port (High-Definition Combination Multimedia Interface) as your display device. The table below outlines the display You can use the Fn + F7 options.

  • Page 248: Configuring An External Display

    Configuring an External Display  You can use the control center to configure any attached displays. Detect Displays Attach your external display to the external monitor port/HDMI-Out port, and turn it on. Open the control center. Click Detect Displays (button) to automati- Select Desktop Management from the menu on the left (click the arrow to expand cally update the at- the menu) and click Creating and Arranging Desktops.
  • Page 249 Click the triangle icon (or right-click the display icon) on the attached display  icon at the bottom to bring up the options (e.g Duplicate or Extend). Select an option from the menu (click Continue if required), and click Yes to Disable Displays accept the settings.
  • Page 250 Desktop Properties Use Desktop Properites (Desktop Management) to configure the desktop area res- olution, color quality, refresh rate and rotation. If the displays are configured in Ex- tend mode then they may be configured independently. Figure C - 8 Desktop Management - Desktop Properties...
  • Page 251 My VGA Displays/My Digital Flat-Panels An additional menu button entitled My VGA Displays/My Digital Flat-Panels will appear (depending on the type of display attached) when an external display is at- tached. This menu allows you to configure the properties of the external display. Af- ter making any adjustments you may need to click the Apply button to confirm the changes.
  • Page 252 HDTV Support If your flat panel supports HDTV functions then this can be configured from My Digital Flat-Panels > HDTV Support (Digital Flat-Panel). Figure C - 10 My Digital Flat- Panels (HDTV Support) C - 12 Display Devices & Options...

  • Page 253: Configuring An External Display In Windows 7

    Configuring an External Display In Windows 7  Attach your external display to the external monitor port/HDMI-Out port, and turn it on. Go to the Screen resolution control panel (see “Video Features” on page 1 - 28). Function Key Click the Detect button. Combination The computer will then detect any attached displays.
  • Page 254 You can configure the displays from the Multiple Displays menu. Figure C - 12 Screen Resolution Multiple Display Options (Win 7) • Duplicate these displays - Shows an exact copy of the main display desktop on the other display(s) • Extend these displays - Treats both connected displays as separate devices •...
  • Page 255 Using the Windows Logo Key + P Key Combination to Switch Displays You can also use the + P key combination to quickly change display configura- tion and modes (this is particularly useful when attaching a projector) in Windows 7. Attach your external display to the external monitor port and turn it on.
  • Page 256 PowerPlay™ When enabled, PowerPlay can be used to automatically set to adjust the graphics ™ processor settings for higher performance or longer battery life when the system is either Plugged In or on Battery. Figure C - 14 PowerPlay ™ C - 16 Display Devices &...

  • Page 257: Hdmi Audio Configuration

    HDMI Audio Configuration HDMI (High-Definition Multimedia Interface) carries both audio and video signals. Configure the audio output as per the instructions below. Connect a device with HDMI support to the HDMI-Out port. Click Start, and click Control Panel (or point to Settings and click Control Panel). Click Sound (Hardware and Sound), and click Playback (tab).
  • Page 258 Double-click the connected HDMI device (or right-click and select Properties) to adjust the HDMI settings from the control panel tabs. Click OK to close the control panel (see notes overleaf). Figure C - 16 HDMI Device Properties C - 18 HDMI Audio Configuration...
  • Page 259 HDMI Notes  • Connect a device with HDMI support to the HDMI-Out port BEFORE attempt- ing to play audio/video sources through the device. Other Applications • To play audio sources through your external display’s (TV or LCD) speakers If you are using a third you will need to go to the audio configuration control panel on the display and party application...
  • Page 260 C - 20...

  • Page 261: Specifications

    Specifications Appendix D: Specifications  Latest Specification Information The specifications listed in this Appendix are correct at the time of going to press. Certain items (particularly processor types/ speeds and CD/DVD device types) may be changed, updated or delayed due to the manufacturer's release schedule. Check with your distributor/supplier for details.

  • Page 262: Processor Options

    Specifications Processor Options Memory Video AMD-E Series (Dual-Core) Accelerated Dual Channel DDRIII (DDR3) AMD Radeon™ HD 7340 Graphics Processing Unit - E2-1800 (1.7GHz) (Integrated with E2-1800 & E2-2000 Two 204 Pin SO-DIMM socket supporting 1MB L2 Cache, 40nm (40 Nanometer), APUs) DDR3 1066MHz/1333MHz (real TDP 18W, DDR3 - 1333MHz...

  • Page 263: Storage

    Specifications Storage Card Reader Keyboard & Pointing Device One Changeable 12.7mm(h) Super Multi Embedded Multi-In-1 Card Reader Model A: Optical Device Drive with SATA Interface - MMC/ RS MMC A4 Size Isolated Keyboard (Factory Option) - SD/ Mini SD / SDHC/ SDXC - MS/ MS Pro/ MS Duo A4 Size Floating Keyboard One Changeable 2.5"...

  • Page 264: Power Management

    Specifications For Models A & B Only: Battery Design Feature UMTS/HSPDA-based 3G Module with Full (Factory Option) 6 Cell Smart Lithium- IMR (Injected Molded Resin) LCD Back Size Mini-Card Interface (Factory Option) Ion Battery Pack, 48.84WH Covers (For Some Model Designs) Quad-band GSM/GPRS (850 MHz, 900 (Factory Option) 6 Cell Smart Lithium- MHz, 1800 MHz, 1900 MHz)

  • Page 265: Dimensions & Weight

    Specifications Dimensions & Weight Model A: 341mm (w) * 238.5mm (d) * 16 - 34mm (h) 2.05 kg (with 48.84WH Battery and ODD) 340mm (w) * 238mm (d) * 25.05 - 33.05mm (h) 2.0 kg (with 48.84WH Battery and ODD) 341mm (w) * 238.5mm (d) * 16 - 34mm (h) 2.2 kg (with 48.84WH Battery and ODD) 340mm (w) * 238mm (d) * 25.05 - 33.05mm (h)
  • Page 266 Specifications D - 6...

  • Page 267: Windows 8

    Windows 8 Appendix E: Windows 8 Overview This Appendix contains information (including control panel information, driver installation etc.) for users of the Windows 8 OS. You can refer to the main manual for details of drivers required, audio & video information, BIOS, modules etc. However any information specific to Windows 8 will be included in this Appendix, as well as details on how to navigate the Windows 8 Metro User Interface to access the applications, control panels, taskbar etc.

  • Page 268: Windows 8 Start Screen & Desktop

    Windows 8 Windows 8 Start Screen & Desktop The Apps, control panels, utilities and programs within Windows 8 are accessed from the Metro user interface’s Start screen and/or Windows Desktop. The Desktop (which runs as an app within the Start screen) can be ac- cessed from the Desktop item in the Start screen (or by using the Windows Logo Key + D key combination).

  • Page 269: Apps & Tiles

    Windows 8 Apps & Tiles The Windows 8 Start screen will contain a number of Apps, and many more will be installed as you add more applications etc. Not all of these apps can fit on one screen so you will often need use the slider at the bottom of the screen in order to view all the necessary apps.

  • Page 270: Desktop Application

    Windows 8 Desktop Application When the Desktop app is running (click the app in the Start screen or use the Windows Logo Key + D key combination) you can use lower left hot corner to switch between the Start screen and the Windows Desktop. To do so move your mouse to hover over the bottom left corner of the screen and click the pop-up.
  • Page 271 Windows 8 When the Desktop app is running you can right-click the lower left hot corner (or use the Windows Logo Key + X key combination) to bring up an advanced context  menu of useful features such as Control Panel, Programs and Features, Power Op- Display Most tions, Task Manager, Search, Windows Explorer, Command Prompt, Device Man- Recently Used...

  • Page 272: Windows 8 Charms Bar

    Windows 8 Windows 8 Charms Bar The right side of the screen displays the Windows 8 Charms Bar. The Charms Bar contains the Search, Share, Start, Devices and Settings menus. To access up the Charms Bar move the cursor to the upper or lower right corners of the screen, and then hover over one of the items in the Charms Bar to activate it (the bar will be black when it is active), or use the Windows Logo Key + C key combination.
  • Page 273 Windows 8 Charms Bar Items • Search : You can search for any file, application, apps and control panel settings with instantaneous results. • Share : This button is used to share information with people via mail or social networks. •...

  • Page 274: Windows 8 Control Panel

    Windows 8 Windows 8 Control Panel In many instances throughout this manual you will see an instruction to open the Control Panel. The Control Panel is much the same as that in Windows 7, however it can be accessed in a number of ways in Windows 8. •...
  • Page 275 Windows 8 • When in the Desktop app (this does not apply to the Start screen) click on Settings in the Windows Charms Bar and select Control Panel from the menu. Figure E - 9 - Settings Charms Bar (Desktop App Only) •...
  • Page 276 Windows 8 • Right-click the lower left hot corner to bring up the menu and select Control Panel (see Figure E - 4 on page E -  Keyboard Shortcut to Control Panel You can also use keyboard shortcuts to access the Control Panel. Press the Windows logo key and X to bring up the context menu, and then press P to bring up the Control Panel.

  • Page 277: Windows 8 Taskbar

    Windows 8 Windows 8 Taskbar In many instances throughout this manual you will see an instruction to access the notification area of the task- bar. In Windows 8 the taskbar is accessed from the Desktop application. If you are in the Start screen you will need to click the Desktop app to switch to the Desktop.

  • Page 278: Led Indicators

    Windows 8 LED Indicators Icon Color Description The LED indicators on the computer display helpful Scroll Lock Activated (to activate press information about the current status of the computer. Green Fn & Scr Lk) Icon Color Description Green Caps Lock Activated Orange DC Power is Plugged In Green...

  • Page 279: Keyboard - Windows 8

    Windows 8 Keyboard - Windows 8  The main difference between the Windows 7 & Windows 8 keyboards is in the func- Windows Logo tion of the Windows Logo Key & Menu/Application Key (in the Start screen), oth- Keyboard Shortcut erwise the keyboard functions are identical (see “Keyboard - Model A Designs I &...

  • Page 280: Keyboard Shortcuts

    Windows 8 Keyboard Shortcuts The following Windows Logo Key (Winkey) keyboard shortcuts are useful for navigation/operation in Windows 8. Description Windows Logo Key + Tap Winkey Toggle between the Start screen and the foremost running app or the Windows Desktop Display Charms menu Switch to the Windows Desktop and toggle show Desktop Switch to the Windows desktop and launch Windows Explorer with Computer displayed...

  • Page 281: Function/Hot Key Indicators & Control Center

    Windows 8 Function/Hot Key Indicators & Control Center The function/hot key indicators and Control Center function in the same manner as outlined for Windows 7 (ex- cept for the Mute, Volume and Brightness indicators which use the standard Windows 8 indicators) in “Func- tion/Hot Key Indicators”...

  • Page 282: E - 16 Video Features

    Windows 8 Video Features You can switch display devices, and configure display options, from the Display control panel (in Appearances and Personalization) in Windows 8 in the same manner as Windows 7 running the Desktop app (see “Desktop Application” on page E - 4 Appendix C).

  • Page 283: Power Options

    Windows 8 Power Options Power Options can be accessed from the Control Panel in the same manner as Windows 7. The Power Menu item in Settings in the Charms Bar in Windows 8 may be used to Shut down, Restart or send the computer to Sleep.

  • Page 284: Ctrl + Alt + Delete Key Combination

    Windows 8 Ctrl + Alt + Delete Key Combination You can use the CTRL + ALT + DEL key combination from almost any of the Windows 8 interfaces/apps to bring up a full-screen displaying Lock, Switch User, Log off, Change a password and Task Manager options. If you click the Power icon in the lower right corner of the screen a power management option menu appears to display Sleep, Shut down, and Restart.

  • Page 285: Wake On Lan Settings

    Windows 8 Wake On LAN Settings  If you require your computer to wake up from network activity in Windows 8 then make sure that the computer is either in Sleep or Hibernate. The power/sleep button Wake On LAN (Fn + F4 key combo) and closed lid may be set to send the computer in to a power- Support (Windows 8) saving state.

  • Page 286: Running Metro Ui Apps

    Windows 8 Running Metro UI Apps  To run Apps in the Metro UI in Windows 8 you will need to check that the Screen Screen Resolution Resolution and User Account Control Settings are compatible with the system re- for Metro Style Apps quirements: (Windows 8) Screen Resolution Settings...
  • Page 287 Windows 8 User Account Control Settings If your computer meets the minimum screen resolution requirements, and still you can't run Metro Apps, then that you have to check the status of User Account Control (UAC). Metro Apps may fail to open when the UAC is turned off.

  • Page 288: E - 22 Drivers & Utilities

    Windows 8 Drivers & Utilities Make sure you install all the drivers and uti lites for your system. Follow the instructions in Chapter 4 “Drivers & Utilities” on page 4 - 1/“Modules & Options” on page 7 - 1 for installing all the basic system drivers and module drivers for Windows 7 &...

  • Page 289: Driver Installation (Windows 8

    Windows 8 Driver Installation (Windows 8) Insert the Device Drivers & Utilities + User’s Manual disc into the computer’s DVD drive. Click the message “Tap to choose what happens with this disc.” Click Run autorun.exe.  Driver Installation If you miss the message above you can eject the De- vice Drivers &...
  • Page 290 Windows 8 Win 7 SP1/Win 8 Driver Page # Win 7 SP1/Win 8 Driver Page # PC Camera Module E - 25 (see page Video (VGA) Page 4 - 6 Page 7 - 3 (Only 14.0” / 35.56cm Model A computers require a camera driver for Windows 8) Page 4 - 6 Wireless LAN Module...

  • Page 291: Pc Camera (Windows 8

    Windows 8 PC Camera (Windows 8) Use the Fn + F10 key combination (see “Function/Hot Key Indicators” on page 1 - 18) or Control Center but- ton to toggle power to the PC Camera module. A PC Camera driver is only required if you have a Model A computer with a 14"/35.56cm screen (see “PC Camera Driver Installation”...

  • Page 292: Metro Ui Camera App

    Windows 8 Metro UI Camera App Make sure the PC Camera is turned on by using the Fn + F10 key combination (or Control Center button). Run the Camera App from the Metro UI by clicking on the Camera App icon The camera interface is a translucent app bar with three buttons.
  • Page 293 Windows 8 You can also click on More to adjust Brightness, Contrast and Flicker (if you find that the video screen in the camera program is flickering, you can try to adjust the setting here), Figure E - 23 -More Camera Options •...

  • Page 294: Taking Pictures/Capturing Video

    Windows 8 Taking Pictures/Capturing Video Make sure the PC Camera is turned on by using the Fn + F10 key combination (or Control Center button). Run the Camera App from the Metro UI by clicking on the Camera App icon Click to select the timer if you require a countdown before capture.
  • Page 295 Windows 8 A scroll arrow will appear on the left side of the screen after any pictures/videos have been captured. Click the arrows (on either side of the screen) to browse through the captured photos/video, and back to the Camera App. 10.

  • Page 296: Wireless Lan Settings (Windows 8

    Windows 8 Wireless LAN Settings (Windows 8) If you have included a Wireless LAN (or WLAN & Bluetooth combo) module in your purchase option, make sure that the WLAN module is on before installing the driver. Use the Fn + F11 key combination (see “Function/Hot Key Indicators”...

  • Page 297: Wlan Configuration In Windows 8

    Windows 8 WLAN Configuration in Windows 8 You can configure a wireless connection using one of the following options, however make sure the Wireless LAN module is turned on (and not in Airplane Mode) before configuration begins. Charms Bar Go to the Charms Bar. Select Settings and then click the WiFi icon (it should read Available under the icon and Airplane mode should be Off).
  • Page 298 Windows 8 Double-click an access point to connect to it (or click it and click Connect). Enter a network security key (password) if required, and click Next. You can choose to share or connect to devices or not. When you are connected to the network access point it will display the Connected icon Select any connected network and click Disconnect to disconnect from a connected access point.
  • Page 299 Windows 8 11. You need to either use Airplane Mode, or to turn the WLAN module off aboard aircraft.  Wireless Device Operation Aboard Aircraft The use of any portable electronic transmission devices aboard aircraft is usually prohibited. Make sure the module is either OFF or in Air- plane Mode (for Win- dows 8 only) if you are...

  • Page 300: Desktop Mode

    Windows 8 Desktop Mode Switch to the Windows Desktop (click the App or use the Windows logo key + D key combination). Click the wireless icon in the notification area of the taskbar. A list of available access points will appear. Double-click an access point to connect to it (or click it and click Connect).

  • Page 301: Control Panel

    Windows 8 Control Panel If you are in Category View do the following (see over for Icon View): Open the Control Panel (see “Windows 8 Control Panel” on page E - Click the Network and Internet control panel. Click Connect to a network. Figure E - 31 - Network and Internet Control Panel A list of available access points will appear.
  • Page 302 Windows 8 If you are in Icon View do the following: Open the Control Panel (see “Windows 8 Control Panel” on page E - Click Network and Sharing Center. Click Change Adapter Settings. Double-click Wi-Fi. Figure E - 32 - Network and Sharing Center Control Panel A list of available access points will appear.

  • Page 303: Bluetooth Settings (Windows 8

    Windows 8 Bluetooth Settings (Windows 8) If your purchase option includes the Combination Wireless LAN & Bluetooth module (either Intel® or 3rd Party) then install the driver as instructed in Chapter 7 (see links below). Use the Fn + F12 key combination or Control Center button to toggle power to the Bluetooth module. ...

  • Page 304: Bluetooth Configuration In Windows 8

    Windows 8 Bluetooth Configuration in Windows 8 You can configure a Bluetooth connection as below, however make sure the Bluetooth module is turned on (and not in Airplane Mode) before configuration begins. Desktop Mode Switch to the Windows Desktop (click the App or use the Windows logo key + D key combination).
  • Page 305 Windows 8 Click Add a Device. Double-click the device you want to pair with the computer. Figure E - 34 - PC Settings (Devices) - Add A Device On first connection the computer will provide you with a pairing code to be entered onto the device. Figure E - 35 - Enter the Passcode Enter the code into your Bluetooth enabled device and click Yes on the computer to complete the pairing.
  • Page 306 Windows 8 You need to either use Airplane Mode, or to turn the Bluetooth module off aboard aircraft.  Wireless Device Operation Aboard Aircraft The use of any portable electronic transmission devices aboard aircraft is usually prohibited. Make sure the module is either OFF or in Air- plane Mode (for Win- dows 8 only) if you are...
  • Page 307 Windows 8 To Make your Computer Discoverable to Bluetooth Devices Switch to the Windows Desktop (click the App or use the Windows logo key + D key combination). Click the notification area of the taskbar, click the Bluetooth icon and click Open Settings. Click Options, and make sure that Allow Bluetooth devices to find this computer check box (Discovery) has a tick inside it.

  • Page 308: Module (Windows 8

    Windows 8 3G Module (Windows 8) (For Models A & B Only) If you have included an optional UMTS/HSPDA OR UMTS/HSPDA+ based 3G Module (Universal Mobile Telecommunications System or High Speed Packet Access) module (see “Communication” on page D - 3 specification details) in your purchase option, you do not require a driver/application installation for Windows 8.

  • Page 309: 3G Configuration In Windows 8

    Windows 8 3G Configuration in Windows 8 You can configure a 3G connection as below, however make sure the 3G module is turned on by pressing the Fn + key combination (give the module about 10 seconds to power on) or Control Center button (and not in Airplane Mode) before configuration begins.
  • Page 310 Windows 8 Any 3G service provider (connection information is usually stored on the USIM card) will appear under Mobile Broadband. Double-click any connection icon under Mobile Broadband (or click and click Connect). Figure E - 39 - Mobile Broadband (Connect) The system will connect to your network.
  • Page 311 Windows 8 You can then access the internet, download e-mail etc. as per any internet connection. To disconnect you can select the connection and click Disconnect 10. You need to either use Airplane Mode, or to turn the Mobile Broadband module off aboard aircraft. ...
  • Page 312 Windows 8 E - 46...

Table of Contents