JVC LT-42R10BU/PP Service Manual page 12

3.2.10 REMOVING THE LCD CONTROL PWB (Fig.3-2)
• Remove the REAR COVER.
• Remove the MAIN BASE.
(1) Remove the 4 screws [A].
(2) Remove the LCD CONTROL PWB COVER.
(3) Remove the LCD CONTROL PWB.
INVERTER PWB COVER
INVERTER PWB (MASTER)
1-12 (No.YA682<Rev.001>)
LCD CONTROL PWB COVER
A
B
LCD CONTROL PWB
LCD PANEL UNIT
Fig.3-2
3.2.11 REMOVING THE INVERTER PWB (Fig.3-2)
• Remove the REAR COVER.
• Remove the SIDE BRACKET.
(1) Remove the 6 screws [B].
(2) Remove the INVERTER PWB COVER.
(3) Remove the INVERTER PWB.
(4) Follow the same steps when removing the other
INVERTER PWB.
B
INVERTER PWB (SLAVE)