Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Logic3 Manuals
  4. Transmitter
  5. IP163
  6. Instruction manual

Logic3 IP163 Instruction Manual

Universal fm transmitter w/lcd
Hide thumbs
1
2
3
4
5

Advertisement

Quick Links

Download this manual
IP163 – Universal FM Transmitter w/LCD
Thank you for purchasing the Logic3 IP163. As with all Logic3 products
the IP163 has been built to the highest manufacturing standards and
testing throughout its development to ensure you get the best possible
product. Please read through and familiarise yourself with this manual
before you use the IP163.
•
Transmits to any FM frequency between 88.1MHz to 107.9MHz
•
LCD display with blue backlight
•
Time & temperature display's
•
Powered by 2 x AAA batteries or the car power plug (supplied)
•
Auto switch off
Power
Button
3.5mm Stereo
User Instructions
Do not connect the FM Transmitter before or when starting the car to
!
avoid any possible power surges or damage to the FM Transmitter or
audio device
Power Connection
Via Batteries
1.
Insert 2 x AAA batteries into the battery compartment at the rear of the FM
Transmitter.
INSTRUCTION MANUAL
USB
●Select
or
select
LCD Info
Frequency
Select
Power Input
Caution
Red LED
12V power
l

Advertisement

loading

Related Manuals for Logic3 IP163

Summary of Contents for Logic3 IP163

  • Page 1 IP163 – Universal FM Transmitter w/LCD INSTRUCTION MANUAL Thank you for purchasing the Logic3 IP163. As with all Logic3 products the IP163 has been built to the highest manufacturing standards and testing throughout its development to ensure you get the best possible product.

  • Page 2: Usb Connection

    Via Car Power Plug 1. Connect the 12V Car power plug to the vehicle cigarette lighter socket. 2. Connect the other end of the car power plug to the power socket at the bottom of the FM Transmitter. 3. The red LED power indicator on the car power plug will light up indicating there is power to the device.

  • Page 3: Fm Transmitter Mode

    FM Transmitter mode Battery level Temperature dis play Transmitter indicator Frequency display Selecting a frequency Press the Frequency Select buttons on the transmitter to select a between 88.1 MHz to 107.9MHz. Select the “FM Band” on the Car stereo and tune to the same frequency as selected on the FM Transmitter.

  • Page 4: Troubleshooting Guide

    TROUBLE SHOOTING GUIDE • No sound will play through to the car stereo speakers: Check the frequency on the car radio is the same as the frequency selected on the FM Transmitter. Try selecting another available frequency on the FM Transmitter and tune the same frequency to your car stereo.
  • Page 5 Should you have any connection or setup problems with the Universal FM Transmitter w/LCD please contact our Technical Support Hotline on +44 (01923) 471 000 – National call rates apply or E-mail support@logic3.com...