Something is broken.
1. Parts of the fuselage, wing and tailplane can be repaired using commercially available EPP adhesives.
Follow the instructions given by the adhesive manufacturers when doing so.
2. Parts made of hard plastic can usually be repaired with superglue.
Caution: Never glue parts of the propeller! Replace the propeller immediately in case of a defect!
(See chapter 3.7).
Note: Also be careful with the use of glue near the rudder hinges. These must not be glued, since in this case
the aircraft is no longer airworthy.
For additional troubleshooting information, please visit www. tobyrich.com/support
9. Warranty
For information about warranty conditions, refer to the general terms and conditions of the retailer where you
purchased the SmartPlane Pro
.
FPV
Keep the receipt safe as a purchase receipt! The warranty for all products is limited to the countries in
which the product was originally offered. You can find the conditions of the worldwide warranty under
www.tobyrich.com/en/support/warranty.
Keep these instructions in a safe place as they contain important information.
Questions? Assistance? Problems?
Under
www.tobyrich.com/en/support you can get assistance!
support@tobyrich.com
www.tobyrich.com
TobyRich GmbH | Konsul-Smidt-Str. 8d | 28217 Bremen | Germany
Need help?
Do you have a question about the SmartPlane Pro and is the answer not in the manual?
Questions and answers