Do you have a question about the THE ACHILL and is the answer not in the manual?
Questions and answers
Paula O Leary
February 20, 2025
What causes the glass on my Henley chill to go black and glazing to occur? I burn kiln dried wood and smokeless fuel
1 comments:
Mr. Anderson
February 20, 2025
The glass on your Henley Stoves Achill can turn black and glaze when burning kiln-dried wood and smokeless fuel due to several factors:
1. Insufficient Air Supply – If the air controls are not set correctly, there may not be enough air to promote full combustion, causing soot and tar to build up on the glass.
2. Low Burn Temperature – If the fire is burning too slowly or at a low temperature, incomplete combustion occurs, leading to more smoke and soot.
3. Incorrect Fuel Placement – If the fuel is placed too close to the glass, it can cause incomplete combustion near the glass, increasing soot buildup.
4. Quality of Fuel – Even kiln-dried wood must have a moisture content below 20%. If the wood is not fully dry or the smokeless fuel is not burning efficiently, excessive soot can form.
5. Restricted Airwash System – The stove’s airwash system helps keep the glass clean by directing air across it. If the vents are blocked or not fully open, soot can accumulate.
6. Poor Chimney Draft – If the chimney is not drawing air properly, smoke and particulates may linger in the stove, leading to blackened glass.
To reduce blackening, ensure proper air settings, use fully dry fuel, maintain a hot burn, and keep the airwash system open. Regular cleaning of the glass and chimney will also help.
Need help?
Do you have a question about the THE ACHILL and is the answer not in the manual?
Questions and answers
What causes the glass on my Henley chill to go black and glazing to occur? I burn kiln dried wood and smokeless fuel
The glass on your Henley Stoves Achill can turn black and glaze when burning kiln-dried wood and smokeless fuel due to several factors:
1. Insufficient Air Supply – If the air controls are not set correctly, there may not be enough air to promote full combustion, causing soot and tar to build up on the glass.
2. Low Burn Temperature – If the fire is burning too slowly or at a low temperature, incomplete combustion occurs, leading to more smoke and soot.
3. Incorrect Fuel Placement – If the fuel is placed too close to the glass, it can cause incomplete combustion near the glass, increasing soot buildup.
4. Quality of Fuel – Even kiln-dried wood must have a moisture content below 20%. If the wood is not fully dry or the smokeless fuel is not burning efficiently, excessive soot can form.
5. Restricted Airwash System – The stove’s airwash system helps keep the glass clean by directing air across it. If the vents are blocked or not fully open, soot can accumulate.
6. Poor Chimney Draft – If the chimney is not drawing air properly, smoke and particulates may linger in the stove, leading to blackened glass.
To reduce blackening, ensure proper air settings, use fully dry fuel, maintain a hot burn, and keep the airwash system open. Regular cleaning of the glass and chimney will also help.
This answer is automatically generated