1. Manuals
  2. Brands
  3. Autonet Manuals
  4. Wireless Router
  5. Routan K6860899
  6. Instruction manual

Autonet Routan K6860899 Instruction Manual

Autonet wifi router instruction manual
Hide thumbs
1
2
3
4

Advertisement

Table of Contents

PROCEDURE STEPS:

NOTE: Using a test light, verify the cigarette lighter outlet being used is ignition switched. Power must not be
present with the ignition in the OFF position.
1. Move the passenger seat to the full rearward position.
2. Disconnect the negative battery cable.
3. Remove the four fasteners (2) on both sides of the
storage bin.
4. Carefully disengage the two spring clips from the top
center of the bin and pull the storage bin towards the
rear of the vehicle.
5. Route the WiFi power harness (1) under the carpet
from the passenger seat to the instrument panel stor
age bin (2).
Oct 16, 2009
WIFI ROUTER
Routan
K6860899 Rev. 2
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Routan K6860899 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Autonet Routan K6860899

  • Page 1 PROCEDURE STEPS: NOTE: Using a test light, verify the cigarette lighter outlet being used is ignition switched. Power must not be present with the ignition in the OFF position. 1. Move the passenger seat to the full rearward position. 2. Disconnect the negative battery cable. 3.
  • Page 2 6. Secure the Wi­Fi router bracket (1) under the passen­ ger seat with the provided materials. 7. Connect the power harness connector (2) to the Wi­Fi router. NOTE: Do not use the power outlet for the power supply to the Wi­Fi router. 8.
  • Page 3 13. Using crimping tool (1), Mopar® p/n 05019912AA or equivalent, crimp the splice clip and wires together. 14. Repeat the previous two steps for the ground side wires. 15. Solder (3) the connection (2) together using rosin core solder (1). 16.
  • Page 4 17. Position storage bin into place and connect the electrical connectors 18. Seat the storage bin and engage the spring clip retainers. 19. Install the four fasteners (2) on both sides of the storage bin. 20. Install the WiFi router (2) into the router bracket (1). 21.

Table of Contents