Setting Up A Wi-Fi Connect - Zte Mblaze Ultra Wi-Fi User Manual

MBLAZE Ultra Wi-Fi User Manual
Note:
If you do not need to connect to the network, it is recommended that you remove the Mblaze Ultra Wi-Fi
from your computer or you click DISCONNECT button to disconnect the network to reduce data traffic.
If you click disconnect button from web GUI it got disconnected for that session once the data card is
removed and plug it again it get connected automatically.

Setting up a Wi-Fi Connect

1.
Ensure that the Mblaze Ultra Wi-Fi function is available.
2.
To setup a computer with the Mblaze Ultra Wi-Fi, choose Start>Control Panel>Wireless Network Connection.
Note:
To set up a Wi-Fi connection, your computer must have a wireless network adapter installed. If Wireless
Network Connections displayed, means a wireless network adapter is available. Otherwise, check to
make sure you have a wireless network adapter installed.
3.
Click View available wireless networks to view the wireless network connection.
4.
Select the wireless network connection whose service set identification (SSID) is the same as that of the Mblaze Ultra
Wi-Fi, and click Connect.
45