Contents OVERVIEW: BUTTONS AND LIGHTS ....1 CONDITIONS AND PREPARATIONS ....2 2.1 I ........2 NSERT ICRO CARD 2.2 P ....... 2 OWER ON OFF THE CAMERA 2.3 B ..........2 ATTERY HARGING 2.4 R ............... 3 ESET PRIMARY FUNCTIONS ........3 3.1 R ...........
2. Conditions and Preparations 2.1 Insert Micro SD card Hold golden fingers of the Micro SD Card towards the inner side, and then insert it into the slot. 2.2 Power on/off the camera 2.2.1 Power on: Press the “Power” button, the blue light turns on and camera goes into standby mode.
2.4 Reset If the camera performs abnormally, use a pin to press the Reset button in the hole to reset it. 3. Primary Functions Functions stated below are primary features of this item. For these functions, it is easy to set up and use.
times and the blue indicator light will turn on, which indicates it stops recording and saves the file. 3.2 Take a photo 3.2.1 Power on the camera, it will go into standby mode, and the blue indicator light will keep on. 3.2.2 Take a photo: Press the “Power”...
your computer. 4. Use More Also, you can use this item to do more. For functions stated below, it is not such easy to set up and use. Just follow the steps. 4.1 Sync recording time with PC Please notice that you should sync recording time with PC before recording video.
4.1.5 Disconnect the camera from your PC, press the “Power” button, both light flash simultaneously for 5s, press it again, the red light turns off, and blue light keeps on. The time has synced. 5. Specifications Image Sensor 1/4 CMOS Video Resolution 640*480 Frame Frequency 30FPS Photo Resolution 640*480...