Page 2
Introduction Thank you for choosing Impact. The Impact A4236 is a lightweight, sturdy, and durable case that is ideal for any application where delicate and bulky lighting equipment needs to be safely transported or stored. This roomy bag has the capacity to fit three monolight strobes and reflectors, as well as quartz or LED lights.
Page 3
Dual handles are easily lengthened to convert into dual shoulder straps. And the bottom of the bag features three rubber feet for added protection when placing the bag on the ground. The bag folds down to a quarter of its height for convenient storage and easy setup. ⚠...
Page 4
Overview Light Kit Bag Adjustable dual handles/shoulder strap Large internal dividers (4) Small internal dividers (2) Bottom panel Inner lid...
Assembly Instructions Open the bag and remove Insert the internal dividers all the contents. according to your needs. Press the touch fastener strips on Insert the bottom panel the sides of the dividers to the so it lays flat on the cotton interior lining of the bag bottom of the bag.
Page 6
Place the inner lid over the Zip up the bag and adjust dividers and press the touch- the length of the handles as fastener strips to the sides of needed. When fully extended, the cotton interior lining. the handles become a shoulder strap.
Need help?
Do you have a question about the A4236 and is the answer not in the manual?
Questions and answers