Eurowater SILEX 1C Instructions Manual

Eurowater SILEX 1C Instructions Manual

Mixed bed cartridge filter

Advertisement

D01B-30A-UK1
|
January 2017
Instructions for
SILEX 1C
Mixed bed cartridge filter
With conductivity sensor
SILHORKO-EUROWATER A/S
DK-8660 Skanderborg
Denmark
|
Gravity flow or pressure installation
Phone +45 86 57 12 22
info@eurowater.com
www.eurowater.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SILEX 1C and is the answer not in the manual?

Questions and answers

Summary of Contents for Eurowater SILEX 1C

  • Page 1 D01B-30A-UK1 January 2017 Instructions for SILEX 1C Mixed bed cartridge filter With conductivity sensor Gravity flow or pressure installation SILHORKO-EUROWATER A/S Phone +45 86 57 12 22 DK-8660 Skanderborg info@eurowater.com Denmark www.eurowater.com...
  • Page 2 We offer customized service agreements, high quality consumables and modernizations. In order to keep your critical systems running EUROWATER offer call-out service for urgent needs, individual service agreement on preventive maintenance, access to high-quality spare parts and consumables as well as modernizations in all shapes and sizes.
  • Page 3: Table Of Contents

    Instructions SILEX 1C D01B-30A-UK1 January 2017 Contents 1. Introduction ..............................4 1.1. List of figures ............................4 2. General information............................. 4 2.1. Plant description ............................. 4 2.2. Quality requirements of the untreated water ..................4 2.3. The contents of dissolved salts in the water - conductivity ..............4 2.4.
  • Page 4: Introduction

    Instructions SILEX 1C D01B-30A-UK1 January 2017 1. Introduction The instructions are made so that they can be followed section by section. It is recommended to follow the instructions carefully since any service calls due to faulty installation, plant start, operation or insufficient maintenance are not covered by our guarantee.
  • Page 5: Installation Instructions

    Instructions SILEX 1C D01B-30A-UK1 January 2017 3. Installation instructions 3.1. Gravity flow installation 1. Use the angle fittings supplied to mount the SILEX plant on the wall close to a stop valve. The water feed to the plant is regulated with the stop valve (pos. 1) 2.
  • Page 6: Pressure Installation

    Instructions SILEX 1C D01B-30A-UK1 January 2017 3.2. Pressure installation 1. Mount the SILEX plant on the wall with the fittings supplied. 2. The plant is designed for a maximum pressure of 6 bar. Exceeding the maximum operating pressure of the plant can cause reflux in the installation or temperature increase in the liquid during a standstill.
  • Page 7: Conductivity Meter

    Instructions SILEX 1C D01B-30A-UK1 January 2017 4. Conductivity meter The electronic conductivity meter continuously measures and displays the quality of the demineralized water. 4.1. Secon V3-10 The water quality is expressed as the water's capability of conducting an electric current and the conductivity is measured in µS/cm.
  • Page 8: Operating Instruction

    When the system or parts thereof are no longer in use, they must be disposed of through approved public or private systems, in accordance with environmental regulations. When in doubt, please contact your local EUROWATER office or distributor. Page 8 | 9...
  • Page 9: Consumables And Selected Spare Parts

    January 2017 7. Consumables and selected spare parts EUROWATER plants last for many years, but consumables, such as filter media, salt for regeneration, ion exchange resin and filters, have a certain capacity or lifespan and must be replaced at certain intervals.

Table of Contents