Philips LC5141 User Manual page 14

7. Installation
COMPONENT VIDEO SIGNAL (YCbCr)
(4)
(3)
#
Audio in Mouse
1. To use YCbCr component video input, set 'SOURCE
CHANGE' under 'COLOR' in the Advanced menu to 'YCbCr'
(See page 20).
2. Connect the Y (green), Cb (blue) and Cr (red) connectors of a
DVD player or other component video equipment to the
corresponding Data/YCbCr connector % of the projector.
For this, use a YCbCr Component cable (optional).
3. To use the built-in audio system, connect one end of the
computer audio cable (3) to the Audio in terminal # on the
projector. Connect the other end (4) to the Audio output
terminal on the video source.
(optional)
%
Data / YCbCr S-Video in Video in
Connecting to video equipment
14