Connecting To Video Equipment - Philips cBright LC4331 User Manual

7. Installation

Connecting to video equipment

Note: The figures in brackets (1) correspond to the figures in the
accessories diagram.
The characters in brackets (a) correspond to the
characters in fig. 4 of 'Controls and connections'.
Always switch off the projector before making any connections.
PAL, NTSC, SECAM
(c)
Audio out Audio out USB USB R Audio in L L Audio in R
Projector
(2)
R Audio L L Audio R
VCR
out out
1. Connect the Video out socket of a VCR, Laser Disc player,
video camera or TV to the Video socket (d) of the projector.
For this, use the video/audio connection cable (2) supplied.
2. Connect the Audio OUT L/R sockets of the VCR, Laser Disc
player, video camera or TV to the Audio in L/R sockets (c) of
the projector.
For this, use video/audio connection cable (2) supplied.
Insert the white plug into the L socket and the red plug into
the R socket.
In case your VCR, Laser Disc player, video camera or TV is
equipped with a Scart connector (depending on region):
1. Connect the Scart/RCA Audio Video adapter (3) supplied to
the Scart connector of the VCR, Laser Disc player, video
camera or TV.
2. Plug the video/audio connection cable (2) supplied into both
the adapter and the Video (d) and Audio in L/R sockets (c) of
the projector.
Caution!
(d)
Video Video S-Video S-Video Data out Data in
(3)
Scart adapter
Video Video
out out (not for USA
version)
Connecting to video equipment
S-VHS
Audio out Audio out
Projector
Data out Data in
VCR
1. Connect the S-Video out socket of a S-VHS video recorder,
Laser Disc player, video camera or TV to the S-Video socket
(e) of the projector.
For this use an (optional) S-vVideo connection cable.
2. Connect the Audio out L/R sockets of the S-VHS video
recorder, Laser Disc player, video camera or TV to the Audio
in L/R sockets (c) of the projector.
For this, use the red and white audio connectors of the
audio/video connection cable.
Insert the white plug into the L socket and the red plug into
the R socket.
In case your VCR, Laser Disc player, video camera or TV is
equipped with a Scart connector (depending on region):
1. Connect the Scart/RCA Audio Video adapter (3) supplied to
the Scart connector of the VCR, Laser Disc player, video
camera or TV.
2. Plug the audio/video connection cable (2) supplied into both
the adapter and the Audio in L/R sockets (c) of the projector.
Insert the white plug into the L socket and the red plug into
the R socket.
3. Plug an (optional) S-Video connection cable into the VCR and
the S-Video socket (e) of the projector.
12
(c) (e)
USB USB R Audio in L L Audio in R Video Video S-Video S-Video
(2) (optional)
Scart adapter
S-Video S-Video
Video Video R Audio L R Audio L
(not for USA
out out out out
version)
Data out Data in Da D
(3)
S-Video