Congratulations your purchase The ANTELOPE system consists of: ANTELOPE.SUIT. Now you are an official member of ANTELOPE.SUIT the ANTELOPE.CLUB. Before you can start with your In case you have any more questions or problems training, please read this manual carefully. The AN-...
ANTELOPE.SUIT. Depending on the parameters of the electrical impuls- Do not use the ANTELOPE.SUIT on injured skin or to es (pulse frequency, duration of contraction, duration stimulate the muscles of an afflicted limb or joint.
The BOOSTER can be charged easily with a micro USB cable when it is plugged into a computer or laptop or with an adapter into an outlet. The fabric of the ANTELOPE.SUIT consists of 54% poly- The ANTELOPE.8C-BOOSTER is the energy source of CAUTION amide, 36% polypropylene and 10% elastane.
9. INSTRUCTIONS FOR USE The ANTELOPE.SUIT is equipped with electrodes NOTE: The electrodes must be placed directly onto the placed on your shoulders, upper arms, chest, abs, skin. Excessive hair growth or extremely dry skin can back, buttocks, upper front and back legs. Especially affect the stimulation.
9.4 Starting the ANTELOPE.APP and connecting the 3. On this screen you see some information to make BOOSTER sure before you can start your workout. In order to connect the APP with the BOOSTER, please click on 1. When you open the APP an info screen appears. [SCAN AND CONNECT TO BOOSTER].
Page 8
5. You can now see to which BOOSTER your phone 7. Now click on the training program of your choice is connected. In order to decide which program you want to use please click the white [info]-button in the top right corner of the screen. 6.
Page 9
Please always increase the intensity slowly and check whether it starts to tingle on your muscle. If it begins to feel uncomfortable please immediately decrease the intensity by either pushing the [-]-button in the APP or on the BOOSTER. In order to stop the stimulation immediately you can press the [STOP]- or the [PAUSE]-button.
• After Warm Up: Use “Strength” or “Endurance” • Suggested training time: 10 minutes for the training program with your ANTELOPE.SUIT. first 3 training sessions. After that, you can in- crease the training time each time you workout Parameters: by 10 minutes until you reach a total of 60 min- •...
• Strength of stimulation feels like: approx. 9/10 NOTE: Strength training with the ANTELOPE.SUIT is more intense than your normal workout. It is therefore important that you only begin this training when you are not already worn out from another training ses-...
11. USE OF THE ANTELOPE.BOOSTER NOTE: Please fully charge the ANTELOPE.8C-BOOSTER 11.4 General Functions before initial use The impulse intensity is adjustable by pressing the 11.1 Switch on/off [+/-]-button on the BOOSTER itself. • On: press and hold the [+]-button for three •...
Severe irritation might derive from too high stimulation intensity. The next time you use the The stimulation is uncomfortable. What can I do? ANTELOPE.SUIT try to start at a lower level and slowly increase the intensity. • Make sure that the black silicone electrodes on •...
You must not try to replace the battery pack guarding of natural resources and health. • Store the ANTELOPE.SUIT out of the reach of yourself. Opening the BOOSTER yourself may children in order to prevent them from swal- cause damage and leads to expiry of your guar-...
Normal wear and tear, fire, water damage, Temperature (0-40°C), theft, vermin or insect infestation. Operating Conditions Humidity (20 – 65%) • Misuse of the ANTELOPE.SUIT including physi- Manufacturer Details cal misuse. Measurements 14,2cm x 8,5cm x 2,6cm • Wrong storage •...
Need help?
Do you have a question about the ANTELOPE.SUIT and is the answer not in the manual?
Questions and answers