Philips Projection Television Quick Use Manual page 3

P R
RONTO
TS1001 (LCD)
INTELLIGENT REMOTE
T
he PRONTO
TS1001 is a LCD
touchscreen universal,
learn remote that com-
bines flexibility of use
with maximum adapt-
ability. Set to automati-
cally work with your
Philips 64PP9901
DPTV and all its inte-
grated Menu system fea-
tures, the Pronto also
has preset "Device"
operations for a variety
of Audio and Video
accessory products
(such as VCR, DVD,
CD, Tape, etc.)
Although the Pronto
remote's prepro-
grammed operating
codes (RC5/6) were set
to work with Philips and
Marantz branded prod-
ucts, other manufactur-
er's equipment can easi-
ly be controlled through
the Pronto's "Learn"
mode capability. Even
the Pronto's keypress
buttons and Device
select list can be cus-
tomized or rearranged
to better match the
order and commands
for your specific in-
home electronics.
The Pronto can also
memorize select key but-
ton sequences in order
to automate, or "short-
cut", a feature function
selection or process.
Once created and placed
in memory the recorded
"macros" will execute
the desired commands
to the various compo-
nents in order to com-
plete, for example, a
display screen ON, touch the
VCR movie playback on
screen with your finger, then let
the DPTV or other simi-
go.
lar procedure.
Pressing the Backlight button
(on the left side of the remote)
Due to the amount of
also turns the display ON.
optional components
available within the
Turn the Contrast dial (on the
left side of the remote) to
Pronto's Device
adjust the screen's brightness.
Reference and Learn
Code Lists, please refer
to the separate full-use
Pronto Owner's Manual
2
for complete details on
the last device screen used (or
its functions and opera-
the Home screen for all of the
tions.
devices the Pronto is set to
operate.)
Press the Home button
at any time to return to the
Pronto's components menu list.
D
EMOTE ESCRIPTION OF
BEGIN
1
To install the four
supplied AA batteries:
Slide the battery cover off the
back of the Pronto remote.
Battery Compartment
Battery Cover
- Battery Life Note -
• Use only AA alkaline or lithium batteries for best results.
• Never mix worn and fresh batteries.
• When battery power is running low a Low Battery icon blinks at
the top of the Pronto LCD display.
• Certain features may continue to operate when battery power is
low, but you won't be able to use the Pronto's learn or customizing
features.
CONTROLS
Light Sensor
IR Transmitter
(Sending Eye)
LCD Touchscreen
OPERATIONS
BEGIN
1
To turn the Pronto
The Pronto will display
Home Screen Control Panel
Press the button for the
desired device to display a
control panel screen for the
device.
C
ONTROLS AND
2
Insert (4-AA) batteries
into the battery compartment.
Be sure the (+) and (-) ends of
the batteries line up correctly
(inside of case is marked.)
- Direct Access Buttons -
• The Mute, Channel (+,-), and Volume (+,-) buttons
will operate even when the LCD touchscreen is off.
They can also be programmed to operate a dedicated
component, such as the DPTV, or different devices at
different times.
Learning Eye
- Left/Right Buttons -
• Function of the Left and Right buttons change depend
ing on the device the Pronto is controlling.
• The LCD touchscreen display will show the Left and
Right buttons current control function labels.
3
A Device menu can also
be used to select components
from a currently opened con-
trol screen.
Press the Device
tab on the touch-
screen and a Device
list will appear. Just
tap the name of the
device you want to operate.
You can also scroll the Device
list by pressing the Arrow but-
ton to move down or
up the list.
3
O
PERATION
3
Reattach the battery cover
when completed. The Pronto
should now be ready for use.
STOP
Recharging Contacts
Side View
4
Press a button on the
control panel to send a remote
command to the selected
"active" device.
Use the scroll
arrows
to move to the next
(or previous) page
of controls. The touchscreen
will display the current control
screen's page number, and the
total number of pages available
for the device (1/8; 2/8; etc.)
B R
ATTERY ECHARGING
An optional recharging
dock and rechargeable bat-
tery pack are also available
for the Pronto remote.
A light on the front of the
Battery Dock will indicate
when the batteries are fully
charged. Depending upon the
condition of the battery pack
a complete recharge could
take 2-3 hours.
Rechargeable Battery Pack and Dock
Contrast Dial (+,-)
Backlight Button
Serial Port
(for future upgrades)
T U /C
OUCHSCREEN SE ARE
• Tap the touchscreen gently when
using the Pronto. Never use force.
• Do not use pens, or any sharp
object to tap the screen. You might
damage the surface.
• Keep the touchscreen dry. Wipe
off any spills immediately. Never
immerse the Pronto in water or any
liquid.
• Do not drop the Pronto on hard
surfaces (or drop anything on the
LCD touchscreen itself.)
• Do not expose the Pronto to
extreme temperatures.
• Clean the touchscreen with a soft
cloth (dampened slightly if needed.)
Never use abrasives or cleaning
solutions.
5
The Pronto is ready to
send device commands when
the Pronto icon is shown
(at the center top of the touch-
screen display.)
If another mode label is cover-
ing the Pronto icon, such as
or , the mode
will need to be reselected.
Tap the Mode
button on the touch-
screen, and reselect
the mode to
return the Pronto to
its normal operating mode.
STOP