Subscribe to Our Youtube Channel
Related Manuals for Digitus professional DN-16100-2
Summary of Contents for Digitus professional DN-16100-2
- Page 1 MANUAL ENGLISH 50 mm SlimLine Half Coupler 100 kg Ordercode: 75001S/75001B Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
50 mm SlimLine Half Coupler 100 kg Table of contents Warning ................................... 2 Safety Instructions ..............................2 Operating Determinations ............................3 Rigging ..................................3 Return Procedure ..............................4 Claims ..................................4 Description of the device ............................. 5 ... -
Page 3: Warning
50 mm SlimLine Half Coupler 100 kg Warning Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. -
Page 4: Operating Determinations
50 mm SlimLine Half Coupler 100 kg Only operate the device after having familiarized with its functions. Only move a load, after having made sure that the load is safely and correctly attached and that there are no persons within the immediate vicinity of the hoist and/or the load. ... -
Page 5: Return Procedure
50 mm SlimLine Half Coupler 100 kg Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. -
Page 6: Description Of The Device
50 mm SlimLine Half Coupler 100 kg Description of the device Features The 50 mm SlimLine Half Coupler has a slotted base, suitable for M10 nuts. Maximum load capacity (SWL): 100 kg Fixing: M10 bolt Tube diameter: 48-51 mm ... -
Page 7: Installation
50 mm SlimLine Half Coupler 100 kg Installation Remove all packing materials from the 50 mm SlimLine Half Coupler. Check if all foam and plastic padding is removed. Damages caused by non-observance are not subject to warranty. Set Up and Operation Follow the directions below, as they pertain to your preferred operation mode. -
Page 8: Maintenance
50 mm SlimLine Half Coupler 100 kg Fig. 03 CAUTION This product is not intended to be used as fall protection! CAUTION The maximum load capacity for the 50 mm SlimLine Half Coupler is 100 kg. Do not exceed this rating. CAUTION Do not use the 50 mm SLimLine Compact Half Coupler to lift people or to lift loads above people! -
Page 9: Inspection & Maintenance Intervals
50 mm SlimLine Half Coupler 100 kg Inspection & Maintenance Intervals The following inspection and maintenance intervals apply for normal use. In case of use in harsh environment, such as regular deployment at full load or use in a hot / dusty or otherwise aggressive environment, the indicated intervals should be shortened. -
Page 10: Notes
50 mm SlimLine Half Coupler 100 kg Notes Ordercode: 75001S/75001B... - Page 11 50 mm SlimLine Half Coupler 100 kg Ordercode: 75001S/75001B...
- Page 12 ©2017 Showtec...
Need help?
Do you have a question about the DN-16100-2 and is the answer not in the manual?
Questions and answers