Connecting Surround Sound Equipment - Philips Cineos 44PL9523 Directions For Use Manual

Connecting Surround Sound Equipment

1
Using speaker wires, connect to the
Center Speaker output terminals
(+, –) on the back of the surround
sound receiver and to the correspon-
ding (+, –) CENTER CHANNEL
AMP terminals on the back of the TV.
2
Set the CENTER CHANNEL AMP
INPUT switch to EXT. This allows
the TV cabinet speakers to be used
as the center speakers in a surround
sound arrangement.
3
Using Stereo Audio cables, connect
to the MON OUT L and R jacks on
the back of the TV and to the corre-
sponding TV IN jacks on the back of
the receiver.
4
Using an Audio cable, connect to the
SUB OUT jack on the back of the
TV and to the Audio Input jack on
the back of a powered subwoofer.
5
Using speaker wires, connect to the
R and L Front Speakers terminals
and to the corresponding terminals
on the backs of the front speakers.
6
Using speaker wires, connect to the
Surround Speakers terminals (+, –)
on the back of the receiver and to the
corresponding terminals (+, –) on the
back of the surround speakers.
7
Press the Menu button on the remote
control to display the on-screen
menu.
8
Press the Cursor Down button to
select "Settings."
9
Press the Cursor Right button to
select "General."
10
Press the Cursor Down button
repeatedly until "Subwoofer" is
selected.
11
Press the Cursor Right or Left button
to select "Yes."
H H
ELPFUL
"Yes" must be activated for the Subwoofer
menu selection before the SUB OUT jack
will supply output. This is because the sub-
woofer's low frequencies are redirected to the
main TV speakers when "No" is selected.
Speakers
INT
Back of TV
Powered
Subwoofer
Audio
Input
180
Phase
0
Front
3
General
Settings
Daylight saving
Change PIN
Subwoofer No • Yes
Lamp rating
Lamp replaced
7
9
9
6
8
17
DVI
G S-VIDEO
R L V
Pr Pb Y
R L V
R L
R L
R L V
G S-VIDEO
RGB+HV
Pr Pb Y
R L
STANDARD/
HD INPUTS
Pr Pb Y
STANDARD/
HD INPUTS
R L
4
+ -
1
Back of Receiver
(example only)
General
Settings
Daylight saving
Change PIN
Subwoofer
Lamp rating
Lamp replaced
H
ELPFUL
5
To simplify making connections,
the connectors on audio cables are
often color coded to match the col-
ors on TV jacks: red for right audio,
and white for left audio.
DVI
G S-VIDEO
R L V
Pr Pb Y
R L V
R L
R L
R L V
G S-VIDEO
RGB+HV
Pr Pb Y
R L STANDARD/
HD INPUTS
TUNER
STANDARD/ Pr Pb Y
HD INPUTS
R L
TUNER
4
Surround
+ -
(Back)
Speakers
Yes • No
H
INT