Prefixes For Filenames - Agilent Technologies FieldFox N9912A User Manual

How to move the cursor:
 Use the rotary knob to move the cursor along the same row. The cursor will
 Use the ▲|▼ arrows to move the cursor up and down between rows.
When the selected keyword is complete:
 Press
 Press

Prefixes for Filenames

A prefix is used as a default filename to which characters can be added. The
prefix can be customized, and quickly enabled or disabled. When enabled, the
current prefix is automatically entered as the start of a filename when
performing a Save operation.
How to enable and disable the current Prefix
 Press Save/Recall 9 .
 Then More.
 Then
How to edit the current Prefix
 Press Save/Recall 9 .
 Then More.
 Then Prefix.
 Then choose from the following:
How to move the cursor
 Use the rotary knob to move cursor on the same row.
 Use the ▲|▼ arrows to move the cursor up and down the rows.
When the Prefix is complete
 Press
 Press
File Management
change rows when it comes to a row end.
Done
to save all keywords and close the Edit Keywords labeler. These
keywords will exist on the FieldFox until changed.
Cancel
to close the labeler without saving changes.
Prefix ON OFF
The current selection is underlined.
Select
Press to add the cursor character to the end of the Prefix.
o
Backspace
Press to erase the last character from the end of the Prefix.
o
Clear
Press to erase the Prefix.
o
The preselected keywords (File, Site, and so forth) can be selected just like a
o
single character. These keywords can also be edited. See Edit Keywords.
Done
to save the Prefix and close the labeler. This Prefix will exist on
the FieldFox until it is changed.
Cancel
to close the labeler without saving changes.
157