Antenna Hookups - Sony STR-V200 Operating Instructions Manual

Antenna Hookups

Overview
This section describes how to connect AM and FM
antennas to the receiver. If you want to receive radio
broadcasts with the receiver, complete these
connections first, then go to the following pages.
ANTENNA
ANTENNA
REAR
AM CD TAPE/MD TV/DBS VIDEO MIX
R
REC AUDIO AUDIO AUDIO AUDIO
IN IN
OUT IN OUT IN OUT
+
L
–
FM
R
300Ω
y
FM
75Ω
What antennas will I need?
• FM wire antenna
(supplied) (1)
Hookups
FM wire antenna Receiver
ANTENNA
After connecting
the wire antenna,
keep it as
horizontal as
FM
possible.
300Ω
z
If you have poor FM reception
Connect a 75-ohm coaxial cable (not supplied) to an FM
outdoor antenna.
FM outdoor antenna
Receiver
ANTENNA
FM
300Ω
SPEAKERS AC OUTLET
CENTER FRONT AC 120V 60Hz
SWITCHED 120V/1A MAX
L R L
+ + +
– – –
IMPEDANCE USE 8-16Ω
• AM loop antenna
(supplied) (1)
AM loop antenna
AM
y
FM
75Ω
AM
Ground wire
y
FM
(not supplied)
75Ω
v
To ground
Important
If you connect an outdoor antenna, ground it against
lightning. To prevent a gas explosion, do not connect
the ground wire to a gas pipe.
Note
To prevent noise pickup, keep the AM loop antenna away
from the receiver and TV.
z
If you have poor AM reception
Connect a 20 to 50 ft. insulated wire (not supplied) to
the ANTENNA AM terminal in addition to the AM loop
antenna. Try to extend the wire outdoors and keep it
horizontal.
Getting Started
Getting Started
5