Advertisement
LED Display Functions
Display
Value
D001
1-512
LED Display Stand Alone Functions
ID01
1-70
R255
0-255
G255
0-255
B255
0-255
FF99
00-99
R2001
0-255
1JP0
0-9
2JP0
0-9
3JP0
0-9
4JP0
0-9
5JP0
0-9
6JP0
0-9
7JP0
0-9
8JP0
0-9
9JP0
0-9
1dE0
0-9
2dE0
0-9
3dE0
0-9
4dE0
0-9
5dE0
0-9
6dE0
0-9
Sud0
0-9
CH02
2/3/5/8/42/44 DMX Channel Mode setting
0
The above menu options are for allowing stand alone use without a controller. For DMX use, please see
DMX Mode profiles below.
Function
DMX Address for unit
ID for easy DMX setting - see instructions
Red Stand Alone Brightness
Green Stand Alone Brightness
Blue Stand Alone Brightness
Strobe from slow to fast
Manual Level of Warm White
Program 1: 1 led jumps to next 1, after all 14 colour changes
Program 2: 2 leds jumps to next 2, after all 14 colour changes
Program 3: 3 leds jump to next 3, after all 14 colour changes
Program 4: Build Led by Led & when complete change colour and rebuild
Program 5: Bounce Led at each end to centre and back then change colour
Program 6: Bounce as Program 5 and also build
Program 7: Build 1 Led at a time thru colours till white and then build to 14 all white
Program 8: All 14 Leds on with single Led chasing
Program 9: As Program 8 but 1 led chasing, then 2 then 3 led chasing
Red Led Pulsing Effect
Green Led Pulsing Effect
Blue Led Pulsing Effect
Pink Led Pulsing Effect
Yellow Led Pulsing Effect
Chasing each colour pulsing effect
Sound Activated from slow to fast
Temperature of unit display in Centigrade
Advertisement
