Page 2
DANLEY OWNER’S MANUAL The instructions on this page apply to Danley powered units. 20. Danley Sound Labs loudspeakers can produce sound levels capable of causing permanent hearing damage from 1. Read these instructions. prolonged exposure. The higher the sound level, the less exposure needed to cause such damage.
Page 3
DANLEY OWNER’S MANUAL Section 1: Your New Loudspeaker Unpacking ........................Inspection ........................Shipping Damage ......................Section 2: Understanding the Difference Synergy™ Technology ....................Section 3: Initial Set Up What Size Amplifier to Use .................... Connecting to the Synergy Horn ..................
Unpacking For most of the Danley Sound Labs products we recommend that it be unpacked by two or more people. Refer to the spec sheet for product weight. Remove tape and open top flaps. Lay the box on its side and slide the loudspeaker out. Remove the packaging wrap.
Page 5
If you have to ask how, you probably shouldn’t be doing it! Safety Precautions Before attempting to rig or suspend your Danley speakers, read and understand the following safety information. IMPORTANT RIGGING SAFETY WARNING! The information in this section has been assembled from recognized engineering data and is intended for informational purposes only.
Page 6
Danley Sound Labs is not responsible for the application of its products for any purpose or the misuse of this information for any purpose. Furthermore, Danley Sound Labs is not responsible for the abuse of its products caused by avoiding compliance with inspection and maintenance procedures or any other abuse.
Page 7
Operation Acoustic Level Warning Danley Sound Labs loudspeakers can produce sound levels capable of causing permanent hearing damage from prolonged exposure. The higher the sound level, the less exposure needed to cause such damage. Avoid prolonged exposure to the high sound levels from the loudspeaker.
Repairs may be performed using new or refurbished parts that meet or exceed Danley specifications for new parts. If Danley elects to replace the product, the replacement may be a reconditioned unit. Buyer will be responsible for any removal or reinstallation charges and for any shipping charges if the product must be shipped for warranty service.
Need help?
Do you have a question about the SH-SM and is the answer not in the manual?
Questions and answers