Audio To Hi-Fi System (Digital); To Select Connected Devices And Audio And Video Functions - Philips 50PL9200D User Manual

Audio to Hi-Fi System (Digital)

7

To select connected devices and audio and video functions

24
Using SPDIF
A
Connect audio cable from the SPDIF jack on the rear of the TV to the
DIGITAL IN jack on the rear of the hi-fi system.
Tip:SPDIF (Sony and Philips Digital Interconnect Format) is highly recommended
for high quality digital sound output.
Select Connected Devices
&
Press the button repeatedly or select
AV
(see p. 13) to select the connected devices' channels:
or , according to where you connected your devices.
Side TV
é
Press the cursor up/down button.
"
Press button.
OK
Select audio and video functions
Most of the audio and video equipment from Philips' range of products can be
operated with the remote control of your TV.
Press one of the buttons after you pressed the
according to the equipment you want to operate with this remote control. See
Use of the remote control, p. 5.
When no action is taken within 60 seconds, the remote control goes back to TV
mode.
to switch to standby
POWER
Δ
for pause,
·
for record,
¢
for rewind ( ,
VCR CD
search down ( ,
DVD AMP
Ê
for stop,
Æ
for play,
∫
for fast forward (
VCR
search up (
DVD/AMP
display information
INFO
to switch the menu on or off
MENU
Notes:
- If no action is being undertaken within 60 seconds, the remote control returns to TV
mode.
- After an action in the selected system mode, the remote control will remain in this mode
for 60 seconds and will then return to TV mode or press the
TV mode immediately.
in the Settings menu
Source
button repeatedly
SELECT
for chapter, channel, track
- CH +
selection
0 to 9 digit entry,
- tape index (
);
select a DVD chapter,
)
select a frequency (
cursor up/down
to select the next or the
, );
CD previous disc (
)
cursor left/right
to select the previous or
following track (
, , , ,
AV1 AV2 AV3 HDMI
),
VCR
)
AMP
CD)
)
CD
button to return to
SELECT