Installation & Setup 1. INSTALLATION Connect one end of the coil cord to the handset and the other end to the handset socket located on the left hand side of the phone. Replace the handset to the cradle. Connect the small plug of the telephone line cord to the socket at the back of the unit and the other plug to the telephone socket at the wall.
Setup & Operation headset and simply press the ‘SPEAKER/HEADSET’ button 2.6 Setting The Area Code once to connect to the line. Pressing the ‘SPEAKER/ HEADSET’ button again will disconnect the telephone line - Press the MENU button twice. 'System' is displayed. and terminate the call.
Warranty locations. 3.8 Pause Button 3.11 Phonebook memory Pressing the 'PAUSE' button during dialling will put a 2 second pause in the dialling sequence. This is needed on The DBT 3000 can store up to 200 names and phone some telephone systems where you may be required to dial numbers.
Warranty but not connected in the following manner: - logged and the total number of caller records stored. When 1. As an extension to a payphone. this has reached 99 records, new calls will delete the oldest 2. On shared service line or 1+1 carrier system. calls stored by the phone.
Page 7
Ist Floor Amphenol Complex Thanet Way Whitstable Kent CT5 3JF ENGLAND Tel: (+44) (0)1227 275357 Fax: (+44) (0)1227 272932 e-mail: info@trojantel.com REF: DBT3000230908...
Need help?
Do you have a question about the DBT3000 and is the answer not in the manual?
Questions and answers