Assembly Overview; Attaching Regulator To Co 2 Tank; Attaching Coupler To Regulator - Nostalgia KRS2100 SERIES Instruction Manual

ASSEMBLY OVERVIEW

Tap Tower

ATTACHING REGULATOR TO CO 2 TANK

IMPORTANT! When you purchase your first keg of beer, you must also have
your CO 2 Tank filled by a local supplier. CO 2 Tanks can be filled at locations such
as welding supply shops, party stores, and wherever kegs are purchased.
1.
Make sure the white nylon High Pressure
Washer (already installed) is attached
to the CO 2 Double Regulator.

ATTACHING COUPLER TO REGULATOR

1.
Remove the attached Hex Nut,
Adapter Nipple and CO 2 Directional
Washer, then place the CO 2 Directional
Washer back into the Keg Coupler.
9
Double Regulator
CO 2 Line
Keg Coupler
2.
Use the Regulator Wrench to attach the
Double Regulator to the CO 2 Tank.
2.
Connect the green end of the CO 2
Line to the Double Regulator, and
the silver end to the Keg Coupler.
CO 2 Tank