Table of Contents
Advertisement
3.1 Control Buttons
Auto Adjusting
Menu
Power
Up
Down
3.2 Structure of OSD settings
First Level
Main
Menu
Auto Adjust
Photo_4 – Control button
a.) Pressing to execute AUTO-Adjusting function. This function
will set the monitor display area to the optimal position.
b.) Sometimes this function can't achieve the optimal effects.
Please follow the manual adjusting procedure.
When the light bar move other item, the key are used to select
it, and read to adjust. Press the MENU key to activate the On-
Screen Display (OSD). Press twice to turn off the OSD. After 30
sec idle time, the OSD screen will automatically turn off.
Use the power switch to turn the power ON or OFF. We
recommend to turn your system power on first, then the LCD
monitor.
a.) When OSD mode is activated (When "MENU" key is pressed).
The two keys are used to select the adjustment items.
b.) When adjustment item is selected, the two keys are defined
to decrease or increase the value of each selected item.
Table_1 – Control button
Second Level
Third
Operating Procedure
Level
Press "UP" or "DOWN" to adjust H-
phase & H-position & V-position clock
automatically.
9
Advertisement
Table of Contents
