Page 2
Follow all instructions, as incorrect installation and use can lead to injury or property damage. ® Flame Boss 300 is intended for use only in dry, outdoor locations. Store the unit indoors in a ® dry location. If you know or suspect that the Flame Boss controller or power adapter has been exposed to excessive moisture or rain or was submerged in water, do not use the unit.
Page 3
Cruise control for your smoker Model 300 Manual In the Package • Flame Boss ® smoker controller • 110-240 volt AC power adapter • Pit temperature probe • Meat temperature probe • Blower • 3 blower adapters for your grill/smoker (Kamado kit only)
Page 10
Top vent almost closed www.FlameBossVideos.com...
Page 11
Probe Installation and Connecting Smoker Controller...
Page 12
With optional Y-cables and additional meat probes, you can monitor up to three different foods with your 300. If you are using multiple meat probes with temperature probe Y-cable(s), all of your meat temperatures will be shown in a rotating display and be identified by numbers 1 through 3.
Page 13
Pit Temp Alarm [Off] 20 F Sound Chirps & Alarm Wifi On/Off Wifi Status Online Myflameboss.com 1234-5678 •WiFi Configuration Screens (see Setting up WiFi) LCD Contrast Temp Scale Fahrenheit Open Pit Pause 1:00 Factory Reset Push Up 3 Times Version 1.##.001 On each screen just press the Up...
Page 14
Screen Details Up or Down changes the timer value Timer Set [ 0:05:00] Off Up or Down starts and stops the timer Timer Start/Stop [ 0:05:00] [Off] Up or Down cycles through these options: Meat Alarm Off - No Alarm On - Alarm when meat reaches the Meat Done Temp Alarm when meat reaches the MEAT Done temperature then Meat Alarm...
Page 15
Press Up or Down buttons to change temp setting Pit Temp Alarm between 15º F - 46º F (11º C - 25º C) [ On] 20 F WiFi Screens are covered in the next section. Up or Down changes the LCD contrast LCD contrast Up...
Page 16
(Flame Boss ® 300) Flame Boss 300 has a WiFi interface that allows you to monitor and control your cooks ® from any device on the Internet with a web browser. Here is how to configure the controller for WiFi.
Page 17
4. Enter your password as follows: • Press Up or Down buttons to select a character Note: Up button character display sequence: then a, A - z, A; then 0-9; then characters ! - } then Space, then Backspace, then Enter ...
Page 18
Then Installed fb 02.##.001 Congratulations, your controller is online! Now visit myflameboss.com with the browser on your mobile phone, tablet, or computer to monitor and control your Flame Boss ® controller remotely. For More Information Please visit FlameBoss.com for more information and support.
Need help?
Do you have a question about the 300 and is the answer not in the manual?
Questions and answers