Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Storm Annika cot
- Page 1 Annika cot Assembly Instructions RECYCLED SJC Brands Pty Ltd abn. 58 106 988 578 Packaging and instructions Annika cot 4-6 Merryvale Rd, Minto, NSW 2566 p.o. box 5878 MINTO DC, NSW 2566 printed on recycled materials 02 9603 5000 02 9603 7000...
- Page 2 Corner Post x4 Cot side x 2 Headboard x 2 Base x1...
- Page 3 H a r d w a r e L i s t M6 x 90 Bolts x 8 M6 x 70 Bolts x 8 M6 x 15 Boltsｘ12 Base Bracket x 4...
- Page 4 Step1-Attach 4 Base Brackets to Base： Hardware needed L on g s ide Shor t Sid e 8x15 Bolts x 4 Base Bracket x 4 Fixed the 4 base brackets to base using 8x15mm bolts through short side of base bracket as shown. Step2-Connect the Base to Cot side Hardware needed : 8x15 Bolts x 8...
- Page 5 Step3-Connect Corner Post to Headboard Hardware needed : M6 X 70 Bolts x 4 M6 X 90 Bolts x 4 M6 X 70 Bolts x 4 Attach corner post to the headboard M6 X 90 Bolts x 4 using M6x70mm bolts at the top and M6x90mm bolts down the bottom as shown.
- Page 6 st ep5 - Tighten all bolts so cot is safe to use and use recommended mattress size 1300*690*110mm(Maximum thickness 120mm). This cot has been manufactured for use with a mattress which measures 690 mm(Wide) x 1300mm(Long) x120mm(Maximum thickness), The width and when the mattress is pushed to one side or end,and 20mm when the mattress is centred in the cot.The thickness of the mattress has been specified to ensure that the...
- Page 7 ＆ Strom Guarantee Warranty Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Need help?
Do you have a question about the Annika cot and is the answer not in the manual?
Questions and answers