Download Print this page

Advertisement

SERIES OF-ROAD KART
USER'S MANUAL
Dear Sir or Madam,
Thank you very much for your choice of this
Off-road Kart.
This Off-road Kart is manufactured according to the
full survey of market demand. We hope that it will bring
you driving pleasure.
Please read the manual carefully before driving
because it will help you learn the basic knowledge of
structure, function, operation and maintenance of the
Kart, which will be of great help for you to keep it in good
condition and drive more safely.
The materials and pictures provided in the Manual
is the latest information made according to the newest
products. There possibly are differences between the
contents in the manual and the actual situation of Kart as
a result of the improvement or changes of the products.
But the user has to operate by the real situation. The
producer preserves the rights revision of the Manual at
any time, with no further information or notice.
No one can copy, quote or print any part of the
Manual without permission from the producer.
Please contact the dealers if you have any
problems about the Kart's operation and maintenance.
Warning: Drivers and Parents should
read and follow the rules in Section 4 before driving
Off-road Kart, which is about the important events
and safety.
Locate and read owner's manual, follow all
instructions and warnings. Don't lend the kart to
anybody
that
can't
drive
surfaces-pavement may seriously affect handing
and control.
it.
Avoid
paved

Advertisement

loading
Need help?

Need help?

Do you have a question about the SLGK-150 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SunL SLGK-150

  • Page 1 producer preserves the rights revision of the Manual at any time, with no further information or notice. SERIES OF-ROAD KART No one can copy, quote or print any part of the USER’S MANUAL Manual without permission from the producer. Please contact the dealers if you have any Dear Sir or Madam, problems about the Kart’s operation and maintenance.
  • Page 2: Table Of Contents

    Contents 1. Brief Introduction to Off-road Kart 2. Main Technical Parameter Table 3. Vehicle Assemblage 4. Important Events and Safety 5. Components and Operation Introduction 6. How to Drive Off-road Kart Properly 7. Maintenance of Off-road Kart 8. Schematic Diagram Attention: the picture shows the external size for the double seats Kart and the size in the bracket is for the single seat Kart...
  • Page 3: Brief Introduction To Off-Road Kart

    1. Brief Introduction to Off-road Kart with excellent steel pipe, which is high in structural 1.1 Brief Introduction strength with reliable safety. ◆ Front independent suspension and articulated and complicated shock-absorber in the rear frame are adopted, which is comfortable and is of great help to prolong the life of the components of the whole vehicle.
  • Page 4: Main Technical Parameter Table

    2. Main Technical Parameter Table 3. Vehicle Assemblage Item Parameters 1. Take off the cover and fixing poles by using Single seat Double seats Type wrench. L × W × H External 2100×1250×1360 2240×1390×1440 2. Take out Steer Wheel and pan head cruciform (mm) Dimensi Axle...
  • Page 5: Important Events And Safety

    ◆ Keep a proper gap with the other vehicles to carburetor, put the other end to the input oil mouth on avoid collision. the carburetor. ◆ Please examine the off-road Kart before driving, 6. Take out the hexangular screws and hexangular making sure that it is in the condition that safe driving flange face nuts and fix the seat.
  • Page 6 ◆ Please read the Manual and all the warning four-stroke engine, you must add the engine oil in time notes carefully before driving and operate by following according to the requirement of the engine. Attention: strictly the procedures and methods. please don’t add the fuel when the engine is in operation ◆...
  • Page 7: Components And Operation Introduction

    ◆ Please don’t drive the vehicle if your body ☆ Braking Pedal dimension or health status are not suitable. Braking Pedal is operated by left foot. It will work ◆ Please keep the vehicle far away from the when step hard forward and the off-road kart will slow resource of heat and fire if you store it for a short time.
  • Page 8 ☆ Gear-engaging Device ☆ Control Panel (Ignition Key and Blanket Switch) Gear-engaging Device Forward Gear Backward Gear 1.Ignition Key 2.Cutout 3.Headlamp 4.Turn signal Switch 5.Horn Switch If there is gear-engaging device in your Kart, you must make clear the function and operating ways of each gear so that you can avoid the danger arising from ☆...
  • Page 9: How To Drive Off-Road Kart Properly

    should not be blocked. Please add the petrol no more than the neck ☆ Turning Lamp Switch bottom of oil feeding mouth when adding. ☆ Light Switch You must fasten Oil Tank Cover after finishing ☆ Horn Switch adding petrol. ☆...
  • Page 10 d. Tires learning the rules of driving safely. You must put on the You should check the tightness of the screw bolt protecting equipment, such as helmet and long-sleeve and screw nut, the state and the air pressure of the tires clothes.
  • Page 11: Maintenance Of Off-Road Kart

    ▲ Attention: You should practice the turning at a 6.3 Steps of Start the Engine ☆ Put the vehicle on the flat place. low speed firstly and increase the speed gradually ☆ Put Ignition Key to the location of starting the to get familiar with the operating features of the off-road Kart.
  • Page 12 Petrol Pipe Line System* ▲ Warning: Accelerator* 1. When conducting maintenance, please read the operation guidance and warning signs and prepare the Air Filter necessary tools and auxiliary materials. Sparkling 2. The clean, flat, ventilating and bright place Plug should be chosen to conduct the maintenance. The Engine Idle engine should be stopped unless necessary.
  • Page 13 The normal distance is 0.61-0.71 mm. You must make it rest engine oil. to the right place carefully if the distance is not proper. ▲ Attention: You should not tighten it to squeeze out ☆ Please drive the screw by hand if installing the rest engine oil and the otherwise will damage the Sparkling Plug to avoid sliding-filament.
  • Page 14 ☆ Safety Wire where the revolution begins to rise. ☆ It is necessary to adjust Accelerator Cable and the Safety Fuse must be installed in the safety wire box. screw nut in the end of Carburetor if Free Path of If safety wire is frequently damaged, there is possibly Accelerator is not in its proper distance.
  • Page 15 中性 150F(S) Series Off-road Kart USER’S MANUAL...
Save PDF