Philips 32PFL5007G/77 Service Manual page 13

4.2 Service Positions
For easy servicing of a TV set, the set should be put face down
on a soft flat surface, foam buffers or other specific workshop
tools. Ensure that a stable situation is created to perform
measurements and alignments. When using foam bars take
care that these always support the cabinet and never only the
display. Caution: Failure to follow these guidelines can
seriously damage the display!
Ensure that ESD safe measures are taken.
4.3 Assy/Panel Removal
4.3.1 Rear Cover
Warning: Disconnect the mains power cord before removing
the rear cover.
Attention: All sets are equipped with a hatch to disconnect the
keyboard control panel. Ambilight sets are in addition equipped
with a hatch to disconnect the Ambilight units.
These hatches are indicated on the rear cover with
SERVICE h.
It is mandatory to open the hatches and disconnect the
cables prior to removal of the rear cover!
See Figure 4-8 to Figure 4-10
1. For sets equipped with Ambilight: open the hatch that
covers the Ambilight connector and unplug the connector
[1].
2. Remove the hatch that covers the keyboard control panel
connector [3].
3. For sets equipped with Ambilight: remove the stand and
swivel block [4].
4. Unplug the keyboard control panel connector [5].
5. Remove remaining fixation screws [metric, 6, and plastite,
7] that secure the rear cover.
6. Lift the rear cover from the TV. Make sure that wires and
flat foils are not damaged while lifting the rear cover from
the set.
Figure 4-8 Rear cover removal -all models -1-
Mechanical Instructions
for details.
1
19300_053_120418.eps
120418
L12M1.1L LA
4
4
3
Figure 4-9 Rear cover removal -all models -2-
4. EN 13
3
4
3
19300_054_120418.eps
120418
2012-Aug-17