Table of Contents
Advertisement
Quick Links
SAFETY WARNING
!
1.
Follow the information on the warnings appearing on the upper bunk end structure and on
the carton. Do not remove warning label from bed.
2.
Always use the recommended size mattress or mattress support, or both, to help prevent
the likelihood of entrapment or falls.
3.
Surface of mattress must be at least 5 in. (127 mm) below the upper edge of guardrails.
4.
Do not allow children under 6 years of age to use the upper bunk.
5.
Periodically check and ensure that the guardrail, ladder, and other components are in their
proper position, free from damage, and that all connectors are tight.
6.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
7.
Always use the ladder for entering and leaving the upper bunk.
8.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
9.
Use of a night light may provide added safety precaution for a child using the upper bunk.
10.
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed
next to the wall, the guardrail that runs the full length of the bed should be placed against
the wall to prevent entrapment between the bed and wall.
11.
The use of water or sleep flotation mattresses is prohibited.
12.
STRANGULATION HAZARD–Never attach or hang items to any part of the bunk bed
that are not designed for use with the bed; for example, but not limited to, hooks, belts
and jump ropes.
13.
Keep these instructions for future reference.
SIZE OF MATTRESS AND FOUNDATION:
Use only mattress, which is 37 1/2" - 38 1/2" width and 74"-75" long on upper bunk (twin size.)
Ensure that the thickness of the mattress does not exceed 6" and that the mattress surface is at
least 5" (127mm) below upper edge of guardrails.
Replacement Parts:
Replacement parts, including additional guardrails may be obtained from any
Night & Day Furniture Dealer.
Certified:
This bunk bed conforms to all applicable consumer product safety standards
16 CFR PARTS 1213, 1500, 1513 and ASTM F-1427
Page 1 of 8
A s s e m b l y I n s t r u c t i o n s
TM
N&D 0307
Advertisement
Table of Contents
Summary of Contents for Night & Day Pelican Twin Bunk Bed
- Page 1 A s s e m b l y I n s t r u c t i o n s Pelican Twin Bunk Bed N&D 0307 SAFETY WARNING Follow the information on the warnings appearing on the upper bunk end structure and on the carton.
- Page 2 A s s e m b l y I n s t r u c t i o n s Pelican Twin Bunk Bed N&D 0307 Parts in Box 1 Parts in Box 2 Note: No Holes! Upper Stretcher (with extra holes) x 1...
- Page 3 A s s e m b l y I n s t r u c t i o n s Pelican Twin Bunk Bed N&D 0905 Attach Stretchers to Lower Frame. Fit Wood Dowels to the Stretchers. Using 100mm Bolts and Barrel Nuts provided with the Lower Frame, attach the Lower Frame to the Stretchers as shown.
- Page 4 A s s e m b l y I n s t r u c t i o n s Pelican Twin Bunk Bed N&D 0307 Fit Slats between the Stretchers. Fix the Remaining Slats with screws. Lay the Slats inside the Stretchers as shown below,and...
- Page 5 A s s e m b l y I n s t r u c t i o n s Pelican Twin Bunk Bed N&D 0905 Attach the Stretchers and Rear Guard Rail to the Upper Bunk. Bolt and Barrel Nut Assembly.
- Page 6 A s s e m b l y I n s t r u c t i o n s Pelican Twin Bunk Bed N&D 0307 Attach Front Guard Rail to the Upper Bunk. Bolt the Slats to the Stretchers.
- Page 7 A s s e m b l y I n s t r u c t i o n s Pelican Twin Bunk Bed N&D 0905 Fit the Upper Bunk onto the Lower Bunk. Fit the Brackets to the Legs.
- Page 8 A s s e m b l y I n s t r u c t i o n s Pelican Twin Bunk Bed N&D 0905 Attach the Ladder to the Upper Stretcher. Finally, hook the Ladder onto the Upper Stretcher.