Test Printing - Epson EPL-N4000 Hardware Setup Manual

5

Test Printing

1. Make sure the imaging cartridge is installed. Turn on the
printer. Several messages appear on the display as the printer
performs internal tests. After about 60 seconds, the Ready
message appears.
c
2. Make sure the On Line light is on. This indicates that the
printer is ready to accept and print data. If it isn't on, press
the On Line button.
3. Press the Enter button two times. The printer prints a status
sheet, showing the current printer settings.
18
Caution:
Do not turn the printer off for about 60 seconds after turning
on the printer. Wait until the printer finishes performing
internal tests and the On Line light comes back on.
Enter
button