Table of Contents
Advertisement
rotary dryer or any other electrical appliance.
3. The wall and induced heating zone above the table surface must be able to withstand
heat.
4. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
Electrical connection:
This appliance must be installed by a qualified professional in accordance with National
Electrical Codes, as well as all state, municipal and local codes. The correct voltage,
frequency, and amperage must be supplied to the appliance from a dedicated grounded
circuit which is protected by a correctly sized circuit breaker or time delay fuse. Appliance
voltage, frequency, and amperage ratings are listed on the product rating plate.
For models SINC424220 and SINC430220, attach the leads to a power supply.
Model
SINC424220
SINC430220
To test the connection:
1. Clear the surface of the cooktop.
2. Clean cooktop surface.
3. Turn on power supply.
4. Verify that the appliance is functioning properly.
If the cable is damaged or to be replaced, the operation must be carried out by a qualified
professional.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced by an authorized technician.
Voltage
Frequency
220
60
220
60
Minimum Circuit
Breaker Amperage
35
35
Total
Watts
6800
6800
Advertisement
Table of Contents
