ION FILM 2 SD PRO Quick Start Manual page 10

USB Mode
USB Mode allows you to transfer images from your SD card directly
to your computer. While in USB Mode, FILM 2 SD PRO becomes an
SD card reader for your computer.
To enter USB mode:
1. Connect FILM 2 SD PRO to your computer's USB port with the
included USB cable and press FILM 2 SD PRO's power button
to turn it on.
2. On the Main Menu, use the LEFT / DOWN and RIGHT / UP buttons to select the
USB icon (shown here), then press the OK button.
Note: While FILM 2 SD PRO is in USB Mode, you will not be able to scan other pictures.
To enable scanning again, turn off FILM 2 SD PRO, then turn it on again and enter
Capture Mode.
3. FILM 2 SD PRO will appear as "FILM2SDPRO" in My Computer (Windows) or on your
Desktop (Mac). (If you are using an SD card formatted by another device, it may show
up with a different name.) Open it, then click and drag the files of your pictures onto your
computer's hard drive.
4. When you are finished, press FILM 2 SD PRO's power button to turn it off.
Settings Mode
In Settings Mode, you will see the following menu options.
1. TV: When FILM 2 SD PRO's TV OUTPUT is connected to your
TV's video input, you can display your images on your TV
monitor. In this menu, select TV, then select the proper format
for your country – (a) PAL or (b) NTSC. (Residents of North
America, Central America, some parts of South America, and
Japan should select NTSC. Most others should select PAL.)
2. Format: You can select the "checkbox" icon (c) to format an
SD card, erasing its contents, or select
cancel (d) to cancel this process. If no
SD card is inserted into the SD CARD
SLOT, the images on FILM 2 SD
PRO's internal memory will be erased.
3. Cancel: Returns to the Main Menu.
a
b
10
1
2
3
c
d