Advertisement
Page 4 • JL Audio, Inc., 2016
S T E P 1
Empty out the rear seat area and fold the rear
seats up.
S T E P 2
Locate the rear seat bracket on the driver's side.
S T E P 3
Remove the factory nut from the rear seat
bracket. Place the Driver's Side Bracket over
the factory stud as shown.
S T E P 4
Reinstall the factory nut and hand tighten.
Repeat the process for the passenger side
using the Passenger's Side Bracket.
SB-GM-SLVCC3/10TW3 INSTR_SKU# 011374
S T E P 5
Attach speaker cable to the terminal cup, place
the Stealthbox® into position, and align the
holes in the Brackets with the threaded inserts
in the back of the enclosure.
Secure each of the Brackets to the enclosure
using a 3/8 - 16 x 1-1/4" Hex Bolt, a 3/8" Lock
Washer, and a 3/8" Flat Washer as shown.
S T E P 6
Tighten the 3/8 - 16 x 1-1/4" Hex Bolt and the
factory nut.
S T E P 7
Repeat for the passenger's side.
S T E P 8
Fold the rear seats back down to fully secure
the enclosure.
Continued on Next Page
Advertisement
