Rear View
USB Dismount Button
is used to safely
disconnect an USB
device.
Ethernet Cable Connector*
connects to the network
cable, which supports the
NWay protocol so that the
camera can detect the
network speed automatically.
GPIO
is used to connect the
external devices.
Antenna Connector:
connects to an external
antenna.
3
Reset Button will restart the
camera when it is pressed quickly;
when it is pressed and held for five
seconds, the camera will restore
the factory default settings.
Audio-Out Connector
connects to an external
speaker.
DC Power Connector
connects the AC power
adapter, in order to supply
power to the camera.