Related Manuals for BMS BMS EcoCam 5
Summary of Contents for BMS BMS EcoCam 5
- Page 1 BMS EcoCam 5 BMS EcoCam 8 User manual Applicable for: BMS EcoCam 5 (74702) BMS EcoCam 8 (74704) ECD150316...
-
Page 2: Safety Information
Carry the camera with care, do not carry it by just holding the goose neck. Please make sure to always use the correct 5V/2A (for BMS EcoCam 5) or 3A (for BMS EcoCam 8) BMS adapter with your BMS EcoCam camera. -
Page 3: Getting Started
1. The BMS EcoCam camera 2. USB cable 3. USB stick (includes software) 4. Mouse, cordless, including battery 5. LAN cable 6. Adapter 5V/2A (BMS EcoCam 5) or 5V/3A (BMS EcoCam 8)100- 240V 7. Remote control with batteries 8. HDMI cable 9. VGA cable... -
Page 4: Optional Accessories
If there is no image when the camera is turned on, showing on the connected display (it takes 1min to start), the connected output is not properly activated. Please use a smartphone or a tablet and the WiFi signal of the BMS EcoCam to choose the appropriate output. - Page 5 The camera 1. Camera head with sensor 2. LED light 3. Goose neck 4. Remote control IR receiver 5. Control panel 6. VGA connection 7. HDMI connection 8. LAN connection 9. USB-B connection 10. USB connection...
- Page 6 Dimensions in cm Setup: 17,2 × 48,5 × 34,3 Folded: 17,2 × 18,3 × 34,3 Power supply 100 – 240V / 5 V /2A (BMS EcoCam 5) 100 – 240V / 5 V /3A (BMS EcoCam 8) Weight in kg (net) 1,30...
-
Page 7: Control Panel
Control Panel Auto: Press to have the camera auto focus and adjust the white balance. Rotate: Press to rotate the image (90°,180°, 270°) Brightness +/-: Image brightness control. Zoom +/-: Zoom in or out. Restart: Long press this button to restart... -
Page 8: Remote Control
Remote control • Standby: Press for 10 seconds to restart the equipment. • CAM: Switch back to the camera signal. • Settings: System setup • OK: confirm ok • ARROWS: Move the mouse to select the location of the picture. Switch back and forth between saved images. - Page 9 Installation of software from the USB Stick The enclosed USB stick carries the BMS SynControl software. This software is necessary to operate the camera by means of a computer. Remove the cap from the stick and insert the stick into a USB port.
- Page 10 Following window opens: Pic 3 Click “Yes” (see arrow in Pic 3) Following window opens: Pic 4 Click “next” (see arrow in Pic 4) Next window opens: Pic 5...
- Page 11 Pic 6 Click “finish” (see arrow) Close all windows until only the desk top screen is opened. Remove the USB stick On the desk top you will find the icon “BMS SynControl” Pic 7 Click this icon to open the program.
- Page 12 A new window will open. Pic 9 In this window a small screen with the BMS EcoCam is shown. The screen is green if it is ready to be opened. Click on it and the camera will show the image on the screen.
- Page 13 The following screen will open: Pic 11 Click on the BMS EcoCam (see arrow in Pic 11) icon to switch to the live image. To go from the life image back to this screen where the options can be chosen, follow this instruction.
-
Page 14: Main Functions
Pic 12 Main Functions The screen image of Pic 11 show the main functions of the BMS EcoCam. By clicking one of these icons, you will be guided further into the program. BMS EcoCam icon: Go to the live image. - Page 15 Go to the App Store and search for “Syncontrol”. A icon with a document camera will appear. Download this App. Set the BMS EcoCam in the right modus. Go to the begin screen (Pic 11) and choose “Settings”. Go to “Network” and select under the WiFi options “WiFi Hotspot”...
-
Page 16: Care And Maintenance
Care & Maintenance Store the camera in a dust free area or the optional case you can purchase at your dealer. It is recommended to never expose the camera to extreme weather conditions. Using or storing the Ecocam camera is best in a temperature of 0° - 45° degrees Celsius. The humidity should be less then 75%.
Need help?
Do you have a question about the BMS EcoCam 5 and is the answer not in the manual?
Questions and answers