Advertisement

Quick Links

Digital Video Recorder

(DVR)
AV6570/H02
Setting and using manual
Version 0.1 – March 2006

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AV6570/H02 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BITRONVIDEO AV6570/H02

  • Page 1: Digital Video Recorder

    Digital Video Recorder (DVR) AV6570/H02 Setting and using manual Version 0.1 – March 2006...
  • Page 2: Table Of Contents

    5.5 Time Recording....................... 17 5.6 Playback ........................17 5.7 Search Play......................17 5.8 Remote control......................18 5.9 PTZ Control ......................18 5.10 Serial Port Control ....................18 5.11 ..........................18 6.0 Keyboard control......................20 7.0 Specifications ......................21 Appendix A ........................22 AV6570/H02...
  • Page 3: Security Notice

    Automatic spot protection when power-off, automatic resume when power on. Four alarm input and one alarm output. Equipped remote device P.T.Z control enable. Totally independent from PC platform, thoroughly keeping away from shutdown caused by inappreciative operations, complicated management and operation, and virus infection. AV6570/H02...
  • Page 4: Logic Connection

    1.1 Logic connection 2.0 Front Panel 1. Hard Disk lodging 2. Hard Disk block key 3. Power led 4. Recording/playing control buttons 5. Function control buttons 6. Enter 7. Channel choosing control buttons AV6570/H02...
  • Page 5: Recording/Playing Control Buttons Area

    PTZ/Last segment: Push this button to enter PTZ control state, push once to control first speed dome, repush to second speed dome, then third, then forth, then quit PTZ control. While playing, push this button, the system will jump directly to the last segment and then begin to play. AV6570/H02...
  • Page 6: Channel Choosing Control Area

    1.Power switch 2.Power connector socket 3.Video output 4.Video input 1, 2, 3, 4 5.Sensor input (CH1) 6.Sensor input (CH2) 7.Sensor input (CH3) 8.Sensor input (CH4) 9.Alarm output 10. RS485 port. 11. IDE port (Not used) 12. Ventilation outlet of fan AV6570/H02...
  • Page 7: Sensor Connection

    RS485 bus using a shielded twisted pair AWG22. If necessary close the line, using a resistor of equal stiffness of the cable, on the last speed. (See 4.14 for DVR configuration). Tastiera configure DVR (AV6570/H02) as showed in chapter 4.14 AV6570/H02...
  • Page 8: System Setup

    If you don’t want to input the password but give up the operation, you can push menu button to return. While inputting the password, in order to avoid being revealed to stander-bys, the password you input is displayed on the screen as “*” signs. AV6570/H02...
  • Page 9: Setup Methods Of Menu

    DVR box. When you set as “QUAD” mode, you can only see the images from the cameras in a quad screen, which shows four sections on the single TV screen, in this mode the playback is real time record if you select 25f/s Frame Rate. AV6570/H02...
  • Page 10: Record Frame Rate

    When the cursor moves to HARD DRIVE SETUP, then push enter button, the hard drive setup window will appear, which is illustrated as below. Push upward or downward button to move the cursor, push “+”or “-” button to change the value, push enter button to select. AV6570/H02...
  • Page 11: Sensor Setup

    When the cursor moves to SENSOR SETUP, then push enter button, the sensor setup window will appear, which is illustrated as below. Push upward or downward button to move the cursor, push “+”or “-” button to change the value. AV6570/H02...
  • Page 12: Sub Menu

    PASSWORD CHANGE, TIME SET, PROTOCOL SET. Push select button to enter each sub menu. 4.12 Password Change When the cursor moves to PASSWORD CHANGE, then push enter button, the password change window will appear, which is illustrated as below. AV6570/H02...
  • Page 13: Time Set

    SPEED-DOME ADDRESS: changeable form 0x00 to 0xff, the default is 0x01. The default addresses of speed dome1 to speed dome 4 are 0x01, 0x02, 0x03, 0x04. Connect the devices and configure speed domes as showed in Chapter 3.3. AV6570/H02...
  • Page 14: Display Statuses While Running

    Refer to chapter 6.0 for the DVR remote command. To control the speed dome by the DVR refer to chapter 5.9. 4.15 Display statuses while running 4.15.1 Screen display while running CH1-CH4 are the names of four channels. “OFF” means the forth channel is set disabled. AV6570/H02...
  • Page 15: Screen Display While Recording

    [M]: current work hard drive is master hard drive. [S], slave (-): normal record, (T): time record, (S): alarm record. 4.15.3 Screen display while playing EACH: record mode. [M]: current work hard drive is master hard drive. [S], slave AV6570/H02...
  • Page 16: User Guideline

    The prerequisite condition of whether the alarm recording can be activated by exterior input signal or the changes of exterior environment is that the system must be set on guard and that period is set to “S” or "P" in record schedule setup, also, that channel must not be set to “NOT-INSTALLED” in sensor setup. AV6570/H02...
  • Page 17: Time Recording

    If the cursor points to the first record segment, push upward button to enter search by time mode as below, push leftward or rightward button to move the cursor, push "+" or "-" to change time, then push enter button to play record from the time you select. Push search button to exit search play window. AV6570/H02...
  • Page 18: Remote Control

    You can also control the DVR by a keyboard through the RS485 port. To control the DVR through the RS485, you have to make sure the protocol and baud rate is the same. Refer to Protocol Set for configuration. AV6570/H02...
  • Page 19: Keyboard Control

    16 CALL Iris/1 6 CALL record 17 CALL Focus/2 7 CALL Play 18 CALL Zoom/3 8 CALL Pause 19 CALL Speed/4 9 CALL Reward 20 CALL Search/6 10 CALL Forward 21 CALL Quality/7/+ 11 CALL Stop 22 CALL Quality/8/- AV6570/H02...
  • Page 20: Specifications

    Support hard disk up to 80G cach Record time See Appendix A Electron clock Year/Monlh/Day; Hour/Minute/Second Secrete function Password protection Power source AC90V-240V Power Work Temperature: +5°C~+50°C: humidity: < 90% Environment temperature Store Temperature: -20°C~+70°C; humidity: < 95% Exterior size 432X55X286mm Weight About 3.2Kg AV6570/H02...
  • Page 21 (including the password) will be lost. After reseting, the password will be set as the default value(111111). 2. You have to use hard disk with 7200 RPM for the highest frame rate recording. N.B. - Bitron Video can change specifications in this manual without notice. AV6570/H02...

Table of Contents