Advertisement
Table of Contents
DELUXE PEDESTAL SWIVEL
READ THIS MANUAL
Do not use this product until
you read and understand the
instructions in this manual.
WARNING!
KEEP INSTRUCTIONS FOR
FUTURE USE.
HIGHCHAIR
PSDH72
This product is designed to
be used by a child who can
sit upright unassisted, up
to a MAXIMUM weight of
18.1 kg.
Advertisement
Table of Contents
Related Manuals for Bebe style PSDH72
Summary of Contents for Bebe style PSDH72
- Page 1 DELUXE PEDESTAL SWIVEL HIGHCHAIR PSDH72 READ THIS MANUAL This product is designed to be used by a child who can Do not use this product until sit upright unassisted, up you read and understand the to a MAXIMUM weight of instructions in this manual.
- Page 3 WARNING! PREVENT SERIOUS INJURY OR DEATH FROM FALLS OR SLIDING OUT. WARNING! ALWAYS SECURE CHILD IN THE RESTRAINT. ALWAYS KEEP YOUR CHILD IN VIEW. WARNING! FOR YOUR CHILD’S SAFETY, FOLLOW ALL LABELS ON THIS PRODUCT AND IN THESE WRITTEN INSTRUCTIONS. DO NOT INSTALL OR USE THIS PRODUCT UNTIL YOU READ AND UNDERSTAND THE WARNINGS AND ASSEMBLY INSTRUCTIONS.
- Page 4 • DO NOT place high chair in any location where there are cords within the child’s reach, such as telephone cords, window blind cords, monitor cords, etc. • Small children or pets can force themselves into very small openings. • NEVER tie or add anything to the chair (i.e. accessories, toys, etc.) as this may cause serious injury, i.e.
-
Page 5: Tools Required
PARTS LISTS A – BASE B – ROTATION POLE C – METAL POLE D – SEAT E – 5 POINT HARNESS F – SCREWS G – TRAY H – INSERT TRAY I – FOOTREST J – EVA FOAM PAD TOOLS REQUIRED -SCREWDRIVER (NOT INCLUDED) ! KEEP THESE INSTRUCTIONS !READ ALL INSTRUCTIONS PRIOR TO... - Page 6 Before assembly, remove the plastic pieces on each side of the pole, and the plastic protective ring on the pole HIGH CHAIR ASSEMBLY 1.Align Notch in bottom of metal pole with rotation button in base. 2.While pressing the rotation button on base, push metal pole downwards until fully inserted into base.
- Page 7 This Highchair has TWO harness shoulder height positions. Choose the position most suitable for your child. TO ADJUST THE HARNESS: Slide the 2 folded ends of the harness shoulder straps on the backrest out through the seat. TO INSTALL THE HARNESS: Line up harness straps with openings on front of seat and turn each folded end of the harness strap so it slides through the front end of the seat.
- Page 8 Please note – Make sure the white plastic ring on the pole is firmly pushed down after the height has been adjusted INSERT TRAY TO REMOVE INSERT TRAY: Lift tab on back of insert tray and lift up. TO INSTALL INSERT TRAY: Snap tab into place on the main tray.
-
Page 9: Using Tray
NOT immerse the harness into water. Doing so may weaken them. Check your product from time to time for loose screws, worn parts, torn materials, etc. Tighten replace or repair parts as needed. Made in China WARNING: Never leave a child unattended in this product. Bebe Style Ltd NW2BGwww.bebestyle.co.uk...
Need help?
Do you have a question about the PSDH72 and is the answer not in the manual?
Questions and answers