Dear Customer, Thank you for purchasing Mobile phone. Kindly read this user manual carefully to learn about key functional characteristics and operational methods of this mobile phone. Contents I Safety and precautions……………………………..……………………...3 II Cell phone outline………………………………..………………….…..4 III Getting Started……………………………………………….………..….4 IV Description of cell phone……………………..……………….……..….8 Basic operation of cell phone…………………..…………….….……10 VI Operation of menu functions..........………....12 VII Operating instructions of English editor.…………..………....…27...
I. Safety and Precautions: To use your phone safely and effectively, please read the following information before use: • Please turn off your phone when you are near a chemical plant, a gas station, an oil depot or other explosives. •...
MAXX operates a policy of continuous development. MAXX reserves the right to make changes and improvements to any of the products described in this document without prior notice. The availability of particular products may vary by region. Please check with the MAXX dealer nearest to you. II. Cell Phone Outline: The following is the view of the phone: III.
Page 5
If you lose your SIM card, please contact your network operator for help. To install your SIM cards, please turn off your MAXX phone first, remove the back cover, and insert the SIM cards into the SIM card slots at the back of the phone.
Faulty battery or accessories may damage your MAXX phone and even cause danger. • If the battery is left unused for a long time or the power is too low, it may require longer time for the charging interface to appear, please wait patiently.
Page 7
Enter appointed shortcut under standby status. OK Key: Confirm an operation in menus. Number keys: Input numbers or characters. Long press the number keys 1to 9 to quick-dial while standby. Long press the # key to switched to silent and quit silent mode under standby status. Short press the * key repeatedly or long press it to enter “P”, “+”...
press the dialing key. If called by SIM card 1, the screen will display “SIM Card 1 Dialing”, and if called by SIM card 2, the screen will display “SIM Card 2 Dialing”. Call status will be displayed on the screen when the call is answered. Press the hang-up key to end the call.
Page 9
2”; if only SIM card 2 is installed, the screen will display vice versa. Switch off: To shut down your MAXX phone, long press ON/OFF key, and after the screen displays the power off animation, the cell phone will shut down. Please do not shut down the phone directly by dismantling the battery, if done so, it is likely that you may damage the SIM card and may lose some information.
Connecting to voice mailbox: Your MAXX phone allows you to divert the incoming call to the voice mailbox, then, you will receive a notice concerning the voice messages (the center number of voice mailbox should be set up properly in advance) VI.
Page 11
If the memory for messages is full, a twinkling icon will be displayed on the screen. Your MAXX phone supports dual SIM card so messages in SIM card 1 and 2 are separately stored. The reminders for full memory of SIM card 1 and 2 will also be given separately. In such case, you need to delete at least one message in the memory of the respective SIM card to receive new message.
Page 12
e. Text format: Set the font, align and paragraph of the texts. • Save to Drafts: To save the messages to drafts. • Send a message: When a message is composed and the SIM card is selected, you can send the message to the receiver through the following ways: 1.
Page 13
Delete messages: To delete the messages from the inbox, outbox, drafts, sent messages. MMS: A multimedia message can contain character, audio file and picture. If the size of a multimedia message is over the limit, the phone cannot receive this multimedia message. The display effect of multimedia messages may vary with different receiving equipment.
Page 14
and the time received. • Reply path: To transfer the reply path to the network terminal. This function requires the support of message center. • Save sent message: To save the sent message. Memory Status: Check memory space use of SIM card or mobile phone. Preferred Storage: Appoint the directory to save the message.
Page 15
h. Delete all contacts: You can delete all the names and phone numbers from the SIM cards 1/2 and phone together or delete one by one. 3. Call History: SIM 1/2 call history: SIM 1/2 missed calls: To view the missed calls (requiring network service support) SIM 1/2 dialled calls: To view the most recently dialed numbers.
Page 16
• Only SIM2 open: Enable SIM card 2 in standby status. • Flight Mode: In Flight Mode, the network and radio transceivers are turned Off to prevent disturbance to sensitive equipment. When the flight menu is activated, you are asked to select a mode the next time you turn on your phone. Normal: full functionality.
Page 17
Select any one of all shortcut menus and press left key to enter one of the following menu options: • Add: Add a new application to shortcut menu. • Edit: Replace the selected shortcut from one of the shortcut menu. •...
Page 18
SIM 1/2 call settings: Caller ID: Includes-- default, hide number and show number. 1. Set by network: The number of the phone will be sent as per the default mode when a call is initiated. 2. Hide ID: The number of the phone will not be sent when a call is initiated. If the system doesn't support this function, it may not make a call.
Page 19
Line switching: Select Line 1 or Line 2. Closed user group: This function requires support of network. Please consult your network operator for more information. Advance settings: a. Blacklist: You can enable or disable the blacklist numbers. b. Auto redial: You can enable or disable auto redial function. If a number is not reachable, the phone will automatically redial.
Page 20
Add, Edit, Delete, and Delete All and jump to date etc. If the alarm reminder is set up for the memo, the cell phone will remind you with a ring once the time is up, and it will display the contents of the memo settings.
Page 21
downloaded to your PC, view them with the right software. When the phone has insufficient memory space for new photos, you should delete some old photos or other files in the "File Manager" function list to release memory space for new pictures Press option, you will see the following menus: •...
Page 22
• Delete: To delete the selected video file. • Delete all files: To delete all video files. • Sort by: To sort video files by desired method. • Storage: To select the storage directory (cell phone or memory card) for a video file. Audio Player: The operating systems other than WIN2000 do not need to install the drivers.
Page 23
• File list: To see the recorded file. Schedule FM record: To set the time for FM radio, you can also record the FM as per set time. 6. File manager: This menu enables you to access the File Manager, where folders or files in the memory card or the phone can be managed •...
Note: The phone automatically switches to the Bluetooth mode when the Bluetooth equipment is plugged, and it restores to the previous mode when the Bluetooth is unplugged. Long press the "#" key when the phone is in the standby state to switch the phone to the silent mode. Long press it again will restore to the previous mode.
Note: The phone can use USB function (like charging) under switched off mode. IX. My SYNC: Your phone supports my sync. Synchronization application enables you to synchronize your messages, phonebook contacts etc. You can get the My SYNC software from the below mentioned site: http://www.maxxmobile.in/Maxx/DownloadCenter.aspx...
Page 27
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: U-300-2(FCC ID:ZU3UNNECTODRIFT) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.787W/kg and when properly worn on the body is 0.420W/kg.
Need help?
Do you have a question about the MAXX and is the answer not in the manual?
Questions and answers