Kilotech KWD 1000 Series Service Manual

KILOTECH
Washdown Weighing Scale Service manual
(WB10D.PCB, FAT60K1-40B.HEX)
Model: KWD 1000 Series

FEATURES:

• Washdown scale to meet IP65 requirements
• 6 Key keypad
• 1" black LCD display with backlight
• 1/3000 External resolution
• Auto zeroing and tare function
• Kg/lb unit weight conversion
• Overload protected load cell
• Low power indication
• Rechargeable battery (DC 6V / 4.5A) or 120VAC 60 hz. power.
Before using for the first time:
•
Place the scale on a stable surface.
•
Adjust four feet to center the leveling bubble on the scale.
•
Avoid hot direct sunlight. Do not place scale near ventilation system.
Power supply
:
•
Power switch: it is located on the underside of the indicator.
•
Scale can be plugged directly into wall outlet for use or for charging.
•
Power consumption: about DC 20mA, with backlight about DC 40mA.
•
Indicator will blank-out and low battery icon flashes to indicate the battery needs recharging. In order to
prolong battery life, recharge the battery every day.
Note:
•
When recharging, do not share power with other equipment and avoid electromagnetic interference from other
devices.
•
If the scale will not be used for long period of time, the scale must be recharged (internal battery) every 3 months.
Recharge scale before using.
•
Red, which means charging and green means charging is finished.
Page 1 of 8
# 2004(WB10D)