Samsung GT-E1310B Service Manual
Samsung GT-E1310B Service Manual

Samsung GT-E1310B Service Manual

Gsm telephone
Hide thumbs Also See for GT-E1310B:

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Samsung GT-E1310B

  • Page 1: Table Of Contents

    GSM TELEPHONE GT-E1310B GSM TELEPHONE CONTENTS 1. Safety Precautions 2. Specification 3. Product Function 4. Array course control 5. Exploded View and Parts list 6. MAIN Electrical Parts List 7. Block Diagrams 8. PCB Diagrams 9. Chart of Troubleshooting 10. Reference data 11.
  • Page 2: Safety Precautions

    ― Don't use as you pleases after change other material than replacement registered on SEC System. Otherwise engineer in charge isn't charged with problem that you don't keep this rules. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 3 ― You must maintain electric contact between ESD and place due to be set up until ESD is connected completely to the proper place or a circuit board. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 4: Specification

    30 dBm ~ 0d Bm Power Cl ass (max +33dBm) (max +30dBm) Sensitivity -1 02dBm -1 00dBm T DM A M u x Cell Ra dius 35Km SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 5: Gsm Tx Power Class

    14±3 dBm 15±2 dBm 12±4 dBm 13±2 dBm 10±4 dBm 11±3 dBm 8±4dBm 9±3dBm 6±4 dBm 7±3 dBm 4±4 dBm 5±3 dBm 2±5 dBm 0±5 dBm SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 6: Operation Instruction And Installation

    • S20 Pin TA • No Java • Dual Band(900/1800MHz) • 40 Poly Ringtone (Midi, AMR, MP3) • Non Camera • Phonebook 500 entry • BT Support SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 7: Array Course Control

    4. Array course control 4-1. Software Adjustments Test Jig (GH99-36900A) RF Test Cable (GH99-38251A) Test Cable (GH39-01160A) RF Test Cable (GH39-00985A) SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 8: Software Downloading

    • Downloader Program ( Gaia Downloader for SEC v04) • GT-E1310B Mobile Phone • JIG BOX • Test Cable • Serial Cable • Binary files SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 9 Array course control 4-2-3. S/W Downloader Program 1. Load the binary download program by executing the Gaia Downloader for SEC v04 “ ”. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 10 Array course control 2. Select the Port, Baud Rate and Mode. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 11 Array course control 3. Select the binary files what you want to download SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 12 Array course control 4. Press the "Start" button and connect the Handset SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 13 Array course control 5 Press the "Download" button. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 14 Array course control 6. When downloading is complete, automatically the small window was showed up. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 15: Exploded View And Parts List

    5-1. Cellular phone Exploded View QFR01 QKP01 QFU01 QME01 QPC01 QCR72 QSP01 QLC01 QMO01 QMP01 QHI01 QMI01 QFL01 QSH01 QAN02 QMW01 QRE01 QCR72 QIF01 QSC01 QCR60 QBA01 QBA00 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 16: Cellular Phone Parts List

    GH72-51347A QSH01 IPR COVER-SHIELD GH70-04574A QSP01 SPEAKER 3001-002482 QFL01 ASSY CASE-FOLDER LOWER GH98-11166A QHI01 ASSY HINGE GH98-03190A QRE01 ASSY CASE-REAR GH98-11168A QIF01 PMO COVER-IF GH72-51345A SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 17: Main Electrical Parts List

    RC1005J220CS 2007-001288 R108 MCR01MZP5J180 2007-001301 R210 MCR01MZP5J680 2007-001333 R214 MCR01MZP5J183 2007-007698 R207 RK73H1ETP5101F 2007-008500 R205 SR73H2BTDR100F 2203-000233 C228 GRP1555C1H101J 2203-000330 C320,C321 GRP1555C1H120J 2203-000386 C301,C304,C309 GRP1555C1H150J SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 18 GRM155R60J105KE19D 2203-006562 C119,C314,C420 CV05X5R105K10AH 2203-006841 C222 CV05X5R105K16AH 2404-001377 TA201 F980J226MMA 2404-001381 TA100,TA200,TA202 F981A106MMA 2404-001414 TA300 TLJR336M006R3000 2703-001734 L102 LL1005-FH6N8J 2703-001990 L103 LL1005-FH22NJ 2703-002201 L301,L302 CIH05T33NJNC SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 19 HDC400 14-5602-034-000-829 3711-006228 BTC200 2005-03-261A 4202-001463 ANT103 ODBTP3015 Please consult the GSPN website (Samsung Portal) for the most recent version of the product's part list. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 20: Block Diagrams

    7. Block Diagrams 7-1. RF Solution Block Diagram SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 21 RF / IF KEY PAD Tranceiver Battery 800mA Elentec AUDIO MIC Interface / RTC --------------- Ear MIC Basic Charging SIM Interface EARSPK & Charging Controller SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 22: Pcb Diagrams

    C212 TP214 TP219 C203 TP220 TP218 C110 F100 L107 L108 C117 TP113 C118 C119 C114 L104 MT207 R115 C123 MT208 C301 C100 D301 C304 MT203 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 23 PCB Diagrams Bottom SOFT401 SOFT400 LED402 LED403 DOWN DIGIT400 DIGIT402 DIGIT401 DIGIT403 DIGIT405 DIGIT404 DIGIT406 DIGIT408 DIGIT407 DIGIT409 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 24: Chart Of Troubleshooting

    OSC200 produces clock Solder OSC200 again signal Not OK Check the R310 concerning about Jig Solder R310 again Power on Is Power On working? Repeat sequence SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 25 XTAL_26M_2 XTAL_32K_1 XTAL_32K_2 OSC201 XTAL_SHLD XTAL_SHLD XTAL_SHLD XTAL_SHLD XTAL_SHLD XTAL_SHLD SIM_CLK SIM_CLK OSC200 SIM_DATA SIM_DATA SIM_RST SIM_RST R_INT SSI_CLK FM_EN SSI_DATA LCD_BL_EN SSI_OUT SSI_SEL0 SSI_SEL1 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 26 C317 R323 1005 UART1_TD_IF 1005 1005 1005 UART1_RD_IF JIG_ON_IF ZD200 HDC400 C420 C227 BTC200 R401 C407 C108 C232 R214 L300 R306 L302 L301 SIM200 C325 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 27: Sim Part

    VSIM_3.0V at the pin#1 Check the SIM Power SIM100 = "H"? Is there any signal pin Check U201 #2,3,6 of SIM200? Check the SIM Card SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 28 Flow Chart of Troubleshooting VSIM_3.0V R214 SIM_DATA VSIM_3.0V SIM_RST SIM_CLK 12 12 C232 10 10 C231 SIM200 L300 R306 L302 L301 SIM200 C325 MT206 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 29 Solder C303, C307 and TA300 again MIC_BIAS Not OK Check the circuit Solder D300,D301,C301,C304,C309 and of MIC PART C305 again Is Phone MIC working? Replace MIC SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 30 UART1_TD_IF 1005 1005 1005 UART1_RD_IF JIG_ON_IF MIC_BIAS D300 C301 R300 C302 C303 MIC_P 1005 MIC300 TA300 C304 C305 C307 MIC_N 1005 C310 R304 C309 D301 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 31 ) Not OK Solder L300, L301, R303, R304 and Check the circuit R305 again of EAR MIC Repeat the sequence Is Earphone MIC working? SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 32 C311 1005 EAR_MIC_N_IF EAR_MIC_N R306 C312 MIC_BIAS D300 C301 R300 C302 C303 MIC_P 1005 MIC300 TA300 C304 C305 C307 MIC_N 1005 C310 R304 C309 D301 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 33: Earphone Part

    U201 Not OK Check the U201 Solder U201 or replace U201 Pin R19, T19 Not OK Check EAR SW Solder U310 again 9-10 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 34 L304 1005 EARP_CTS L306 1005 VCM_RTS 1005 L307 1005 EAR_N R316 C320 C321 C316 C315 C317 R323 1005 UART1_TD_IF 1005 1005 1005 UART1_RD_IF JIG_ON_IF 9-11 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 35: Charging Part

    Check the U203 Replace U203 Pin #20 = 5V? Not OK Check the C222, C223 Solder C222, C223 and R205. and R205 Check the TA connection. 9-12 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 36 ICHGP D2 11 6 D1 D2 13 VBAT R205 FLAG 15 2 NC ICHGN 12 NC 16 NC GND 19 22 NC NC 27 9-13 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 37: Speaker Part

    Check Pin W18, W19 of Solder U201 again or replace U201 U201 Not OK Check the Pin #3, #4 of Replace HDC400 HDC400 Not OK Replace the speaker 9-14 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 38 1005 33 33 34 34 C411 C410 C402 C403 C404 C405 C406 C407 C408 C409 C400 C401 C412 C414 C415 C416 C417 C418 C419 9-15 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 39: Key Data Input

    Check the Dome sheet & Key FPCB pushed, is it displayed on LCD? When one of the keys is Replace the PBA pushed, KEY_IO signal is OK? 9-16 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 40 Set BACKLIGHT on Always ON in the Menu? Not OK Check the outflow voltage of Replace HDC400 HDC400(PIN 17) is equal to High Replace the LCD Module 9-17 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 41 1005 33 33 34 34 C411 C410 C402 C403 C404 C405 C406 C407 C408 C409 C400 C401 C412 C414 C415 C416 C417 C418 C419 9-18 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 42: Key Back Light

    Set BACKLIGHT on Always ON in the Menu? Not OK Check VDD_KEY_ON and Resolder R403 and R421 and replace U401. R403, R421 Replace LED 9-19 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 43 R403 VOUT 1005 KEY_EN LED400 LED401 LED402 LED403 LED404 LED405 C420 R404 C421 1005 1005 SOFT401 LED403 DIGIT400 DIGIT401 DIGIT403 DIGIT404 DIGIT406 DIGIT407 DIGIT409 9-20 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 44: Gsm Receiver

    G1, F1 (EGSMRX) Check C112, C113 and L103 ≥ -65dBm > Not ok Resolder or Change F100 Check U202 Resolder or Change MOD_STANDBY=HIGH U201 PON_PA=LOW BAND=LOW 9-21 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 45 C111 TX_EN PAM100 RX1 12 OUT1 1005 GSM_IN DCSRX_N DCS|PCS_IN BAL2 7 1005 EGSMRX_P NC 14 4 IN2 C112 OUT2 L103 1005 EGSMRX_N C113 9-22 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 46: Gsm Transmitter

    Flow Chart of Troubleshooting 9-12. GSM Transmitter TX ON (5Level) Resolder PAM100 PAM100 Pin13 (TX MODULE) ≥ 30dBm PAM100 pin19 20dBm ≥ Check U201 Resolder U201 (TRANSCEIVER) 9-23 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 47 SSI_SEL1 VLOGIC MOD_STANDBY VRAMP RAMP TX_EN PON_PA PAM100 RX1 12 R108 C114 GSM_IN EGSM_TX DCS|PCS_IN 1005 NC 14 L104 R111 C117 DCS_TX 1005 L107 9-24 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 48: Dcs Receiver

    E1, D1 (DCSRX) ≥ -65dBm > Not ok Resolder or Change F100 Check U201 Resolder or Change MOD_STANDBY= "HIGH" PON_PA= "LOW" U201 BAND= "HIGH" 9-25 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 49 PAM100 RX1 12 OUT1 1005 GSM_IN DCSRX_N DCS|PCS_IN BAL2 7 1005 EGSMRX_P NC 14 4 IN2 C112 OUT2 L103 5 10 1005 EGSMRX_N C113 9-26 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 50: Dcs Transmitter

    Flow Chart of Troubleshooting 9-14. DCS Transmitter TX ON (0Level) Resolder PAM100 PAM100 Pin13 (TX MODULE) ≥ 30dBm PAM100 pin20 20dBm ≥ Resolder U201 Check U201 (TRANSCEIVER) 9-27 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 51 SSI_SEL1 VLOGIC MOD_STANDBY VRAMP RAMP TX_EN PON_PA PAM100 RX1 12 R108 C114 GSM_IN EGSM_TX DCS|PCS_IN 1005 NC 14 L104 R111 C117 DCS_TX 1005 L107 9-28 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 52: Reference Data

    ― QPSK: Quadrature Phase Shift Keying ― RS : Reed-Solomon ― SI : Service Information ― TDM : Time Division Multiplexing ― TS : Transport Stream 10-1 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 53: Disassembly And Assembly Instructions

    (Refer to the picture.) Torque Setting : 1.0~1.2 kgf*cm Pull the FPCB outside. (Refer to the picture) DO NOT MAKE SCRATCH ON PBA. Disassembled the REAR. 11-1 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 54 Release screws at 3 point. (Refer to the picture.) Disassembled Front and KEYPAD. DO NOT MAKE SCRATCH ON PBA. Torque Setting : 1.0~1.2 kgf*cm 11-2 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 55 FRONT's HINGE and separate it. Unsolder mic. TO PRESS FRONT'S HINGE, USE THIN AND STRONG OBJECT. DO NOT DAMAGE ON PBA Heater Temperature : 350 ~ 380 ˚C 11-3 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 56 Take out the screw cap on the Lower. (Refer to the picture.) DO NOT MAKE SCRATCH ON LOWER. Torque Setting : 1.0~1.2 kgf*cm DO NOT MAKE SCRATCH ON LOWER. 11-4 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 57 (Refer to the picture.) (Refer to the picture.) Remove the HINGE SHEET from Lower. (Refer to the picture.) Disassembled Upper and Lower. 11-5 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 58 FPCB to connector. (Refer to the picture.) THE CON TO CON MUST NOT BE CRUMPLED. DO NOT MAKE SCRATCH ON SUB PBA AND FPCB. 11-6 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 59 DO NOT MAKE SCRATCH ON SUB PBA. WHEN REMOVING BONDING, DO NOT Heater Temperature : 350 ~ 380 ˚C DISCONNECT WIRE OF RECEIVER AND MOTOR. 11-7 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 60 Insert the FPCB to connector. (Refer to the picture.) WHEN INSERT THE FPCB TO CONNECTOR, SUIT FPCB'S SILK LINE AND SUB PCB SILK LINE. (REFER TO THE PICTURE.) 11-8 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 61 Attach the HINGE SHEET from Lower. Finally,insert the receiver and motor. (Refer to the picture.) (Refer to the picture.) WHEN INSERT THE MOTOR, TWIST MOTOR'S WIRE ONCE. 11-9 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 62 Lock the right and left side of rear by DO NOT MAKE SCRATCH ON LOWER. pressing it. (Refer to the picture.) Torque Setting : 1.0~1.2 kgf*cm 11-10 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 63 DO NOT MAKE SCRATCH ON LOWER. Fpcb must not come up on hinge dummy. Fpcb must insert hinge dummy. (Refer to the picture.) (Refer to the picture.) 11-11 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 64 (Refer to the picture.) (Refer to the picture.) Solder mic. Check hinge inside Front. DO NOT MAKE SCRATCH ON PBA. Heater Temperature: 350 ~ 380 ˚C 11-12 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 65 Assemble PBA and SHIELD CAN. ① ② ③ Drive screws at 3 point. Assemble Keypad. DO NOT MAKE SCRATCH ON PBA. Torque Setting : 1.0~1.2 kgf*cm 11-13 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 66 Disassembly and Assembly Instructions Press the PBA inside. (Refer to the picture) Assemble PBA AND Front. Assemble PBA and FPCB. Assemble Front and Rear. 11-14 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 67 Lock the right, left side and bottom of Rear by pressing it. DO NOT MAKE SCRATCH ON REAR. (Refer to the picture.) Torque Setting : 1.0~1.2 kgf*cm 11-15 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 68: Schematic Diagram

    ○○○○○○○○○○○○○○○○○●○ ○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○ ○●○●○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○●○○● ○○○○○○○○○○○○●●●○○●○ ○○○○○○○○○○○○○○○○○○○ ○○○○○○○○○○○○○○○○○●○ ○○○○○○○○○○○●○○○○○○○ U202 9 10 ●● ○○ ●● ○○○○○○○○○○ ○○○○●○○○○○ ○○○○○○○○○○ ○○○○○○○○○○ ●○ ○○ ●● 12-1 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 69 BT_GPIO_10 BT_VSSRF THIS DOCUMENT CONTAINS CONFIDENTIAL TP122 SHORT BT_GPIO_16 TP123 RGND AGND BT_GPIO_8 BT_TEST1 PROPRIETARY INFORMATION THAT IS BT_TEST2 BT_GPIO_0 BT_AF_PRG RGND AGND SAMSUNG ELECTRONICS COS PROPERTY. DO NOT DISCROSE TO OR DUPLICATE FOR OTHERS EXCEPT AS AUTHORIZED BY SAMSUNG.
  • Page 70 12 EXT2 SAMSUNG PROPRIETARY BASEBAND JTAG-13PIN-SWIFT THIS DOCUMENT CONTAINS CONFIDENTIAL MT202 MT203 MT204 MT205 MT206 MT207 MT208 PROPRIETARY INFORMATION THAT IS JTAG BOSS HOLE SAMSUNG ELECTRONICS COS PROPERTY. DO NOT DISCROSE TO OR DUPLICATE FOR OTHERS EXCEPT AS AUTHORIZED BY SAMSUNG.
  • Page 71 R315 C309 D301 1005 C314 UART1_CTS Hall IC MAIN_MIC Headset / UART SW SAMSUNG PROPRIETARY THIS DOCUMENT CONTAINS CONFIDENTIAL PROPRIETARY INFORMATION THAT IS SAMSUNG ELECTRONICS COS PROPERTY. DO NOT DISCROSE TO OR DUPLICATE FOR OTHERS EXCEPT AS AUTHORIZED BY SAMSUNG.
  • Page 72 LED400 LED401 LED402 LED403 LED404 LED405 C420 R404 C421 1005 1005 KEY LED SAMSUNG PROPRIETARY THIS DOCUMENT CONTAINS CONFIDENTIAL PROPRIETARY INFORMATION THAT IS SAMSUNG ELECTRONICS COS PROPERTY. DO NOT DISCROSE TO OR DUPLICATE FOR OTHERS EXCEPT AS AUTHORIZED BY SAMSUNG.
  • Page 74 China china.samsungportal.com Asia asia.samsungportal.com Mideast & Africa mea.samsungportal.com This Service Manual is a property of Samsung Electronics Co.,Ltd. Samsung Electronics Co.,Ltd. ⓒ Any unauthorized use of Manual can be punished under applicable 2009. 04. Rev.1.0 International and/or domestic law.

Table of Contents