M-LIVE X-Light 2 Quick Manual

QUICK GUIDE
WARNINGS
Connecting to the electrical mains (for devices that require it)
Before connecting the external power supply unit/adapter to the mains, make sure
that the voltage is as specified (max. tolerance ±10%).
Connecting and switching on and off
Connections must always be made with devices switched off.
Always switch the device on and off with the sound amplification system off.
Connecting the X-Light to the computer
When connected to a computer by an USB port, the X-Light is automatically recognised
as a dual audio/MIDI device, with no need to install any software. It is usually identified
as USB Speaker 1 and USB Speaker 2, referring to the two internal sound generators
#1 and #2, but the name may change depending on the operating systems
or applications used.
Protection and maintenance
Avoid prolonged exposure to direct sunlight, intense heat sources, strong vibrations,
especially damp or dusty environments, or rain, since they may cause malfunctions,
deterioration and even electric shocks. Remove any dust with a soft, dry cloth or a
brush: never use methylated spirits, acetone or any other solvents. No other form of
maintenance is required.
In case of malfunction
All the device's setting functions are easily accessible on its outside. In case of
malfunction, contact the M-LIVE Service Center - e-mail: assistenza@m-live.com
Documentation
Any updates or other support will be available on the site www.m-live.com
1