E n g l i s h 22-11-2016 CONTENTS: page INSTRUCTIONS FOR THE INSTALLER WARNING PRELIMINARY OPERATIONS III. INSTALLATION AREA PREPARING FOR INSTALLATION ELECTRICAL CONNECTION DRAINAGE CONNECTION VII. SPECIFICATIONS INSTRUCTIONS FOR THE USER WARNING USE FOR THE FIRST TIME III. ORDINARY MAINTENANCE EXTRAORDINARY MAINTENANCE MAINTENANCE IN CASE OF BREAKAGE...
E n g l i s h INTRODUCTION Dear client, thank you and congratulations for buying this appliance; we are confident that this is the beginning of a positive and long-lasting collaboration. This manual has all the necessary information for the correct use, maintenance and installation of this appliance.
E n g l i s h III. INSTALLATION AREA The appliance shall be installed in enclosed and well ventilated areas (not outdoors). Before positioning the appliance, check the overall dimensions and the exact position of the electrical connection. It is advised to place the oven under an extractor hood or in such a way that hot fumes and odours exit the oven via adequate ventilation to the outside.
E n g l i s h ELECTRICAL CONNECTION WARNING: The main connection must be carried out by a qualified and authorised technician according to national, international and local laws in the country where it is installed. Before the main connection, ensure that the frequency (…..Hz) and voltage (….V) meet the requirements indicated in the in the information tag on the back of the appliance.
E n g l i s h INSTRUCTIONS FOR THE USER WARNING Read this instructions booklet carefully in that it provides indications regarding safety and use of the appliance. Store carefully for reference at all times. Incorrect installation, assistance, maintenance, cleaning, tampering or modifications can cause malfunction, damage and breakage.
E n g l i s h This appliance complies with the EU directives in force. On airborne noise emissions, the A-weighted sound pressure level is below 70 dB(A). USING FOR THE FIRST TIME Make sure to perform all required cheeks to adhere to the soundness of the systems and the installation of the appliance in accordance with regulations, technical and safety instructions provided for by this manual before operating the appliance.
E n g l i s h III. ORDINARY MAINTENANCE The user is solely responsible for ordinary maintenance. The Assistance Centre must be contacted for extraordinary maintenance which requires a specialized authorized technician. CLEANING: GENERAL RULES Disconnect electrical power from the appliance and wait until the oven is cooled completely before cleaning.
E n g l i s h REPLACING LIGHT LAMPS WARNING: Strictly adhere to the following procedure in order to avoid electric shock or damage to people: • Disconnect the electrical connection of the oven and let it cool. • take off the side grids that hold the baking trays.
E n g l i s h | 10 FAILURE CAUSE SOLUTION Loose lamp Correctly fit the lamp into the lamp holder Oven light OFF Blown lamp Replace the lamp (see ordinary maintenance ) Contact specialized technician for repair Non-uniform cooking The fan is not operating (Assistance Service ).
Page 12
E n g l i s h | 11 Correct use of core probe: insert in the thickest part of the food from top to bottom until the centre is reached with the core probe. To counteract the loss of heat through opening the door to put food in the oven, it is advised to preheat to at least 30 °...
E n g l i s h | 12 VII. MECHANICAL OVEN CONTROL PANEL Thermostat knob Thermostat light Timer knob • TIMER KNOB When manual is selected, the oven stays on until someone turns it off. When a certain value is selected, the oven stays on for that time (120 minutes maximum). •...
Need help?
Do you have a question about the PF5504 and is the answer not in the manual?
Questions and answers
Oven fans n9t turning