Advertisement
Quick Links
ACQ132CPCI Hardware Installation Guide
Hardware Installation Guide
32 Channel Simultaneous Analog Input CPCI Card
Any specifications, drawings or reprints or data furnished to bidder or seller shall
remain
for the purposes of complying with D–TACQ Solutions' requests for quotation or with
D–TACQ solutions purchase orders and shall be returned at D–TACQ Solutions
request. Patent rights embodied in designs, tools, patterns, drawings, devices,
information and equipment supplied by D–TACQ solutions pursuant to this request for
quotation or purchase order and exclusive rights for use in reproduction thereof are
reserved by D–TACQ Solutions Ltd unless otherwise agreed on purchase order.
© D–TACQ Solutions Ltd 2009
ACQ132CPCI
D–TACQ Solutions Ltd property, shall be kept confidential, shall be used
Doc 1401-4101-000 Rev 1.1 December 2009
Page 1 of 8
Advertisement
Summary of Contents for D-TACQ Solutions ACQ132CPCI
- Page 1 ACQ132CPCI Hardware Installation Guide Hardware Installation Guide ACQ132CPCI 32 Channel Simultaneous Analog Input CPCI Card Any specifications, drawings or reprints or data furnished to bidder or seller shall remain D–TACQ Solutions Ltd property, shall be kept confidential, shall be used for the purposes of complying with D–TACQ Solutions’...
-
Page 2: Installation Notes
ACQ132CPCI Hardware Installation Guide Installation Notes The ACQ132CPCI Card is a complex electronic sub-assembly. Special care should be taken in handling. The card is susceptible to damage by ESD and improper power connections. 1.1 Be aware of ESD (Electro Static Discharge) precautions [chassis, body grounding] are taken before opening card from packaging. -
Page 3: Operating Mode
Operating Mode 2.1 Standalone Jumper ACQ132CPCI is designed to operate either as a Peripheral Card / System Slot Card or a Stand Alone Card. When in Stand Alone mode the card ignores all PCI signals and only derives power from the CPCI Backplane. PXI signaling is available in all modes. -
Page 4: Standards Compatibility
ACQ132CPCI Hardware Installation Guide Standards Compatibility Product conforms to PICMG2.0 rev 3.0. The PCI interface supports Universal [3.3 or 5V] signaling. The card is capable of performing the CPCI System Slot function. Connectors It is common practice for customers to manufacture their own cables and termination units, to fit in with their own sensor requirements. - Page 5 ACQ132CPCI Hardware Installation Guide 4.3 Front panel Layout View on Front Panel as viewed in a vertical chassis Channel 1-16 68 WAY SCSII Connector Channel 17-32 68 WAY SCSII Connector Trigger Lemo EPL.00.250.NTN Clock Lemo EPL.00.250.NTN 1000 Base T Ethernet RJ-45 ©...
- Page 6 ACQ132CPCI Hardware Installation Guide 4.4 Analog Input Connector on Front Panel for Channel 1 to 16 Pin No. Signal Pin No. Signal Analog In 1+ Analog In 1- Analog In 2+ Analog In 2- Analog In 3+ Analog In 3-...
- Page 7 ACQ132CPCI Hardware Installation Guide 4.5 Analog Input Connector on Front Panel for Channel 17 to 32 Pin No. Signal Pin No. Signal Analog In 17+ Analog In 17- Analog In 18+ Analog In 18- Analog In 19+ Analog In 19-...
- Page 8 ACQ132CPCI Hardware Installation Guide Rear Transition Module RTM Compatibility. The ACQ132CPCI does NOT require a Rear transition Module for operation, however where additional functionality is required, it is compatible with the ACQ196-RTM's: ACQ196CPCI-RTM1 – Digital Inputs, Ethernet, RS232. ACQ196CPCI-RTM-DIO32 – Digital Inputs, Ethernet, RS232, 32 Digital I/O.