Page 1
Launch Control is also an iPad compatible controller, fully integrated with the Novation Launchpad app or as a controller to be mapped to your favourite music apps. The Novation Launchpad app is a loop-triggering performance app. Use the pads on Launch Control to trigger sounds and FX, and the knobs to control volume and filters.
Page 2
USING LAUNCH CONTROL WITH iPAD Launch Control can be connected to an Apple iPad. An Apple Camera Connection Kit is required (available from the Apple Store or online). Launch Control will power from the iPad. 1 Launch Control 2 USB...
Page 3
If using Launch Control alongside other hardware, connect the hardware to a powered USB hub, then connect the hub to the iPad. 1 Launchpad S 2 Powered USB hub 3 Apple 30 pin Camera Connection Kit (not included) 4 iPad...
Page 4
The Novation Launchpad App is available for free on the App Store. Once downloaded, connect Launch Control and start the app. Once a session is loaded, Launch Control can be used to control all elements of the session as shown below.
Page 5
Move row of pads up and down Pads trigger FX Pads trigger sounds...
Page 6
Simply connect Launch Control to your computer as shown below. LAUNCH CONTROL WITH ABLETON LIVE Launch Control is fully inegrated with Ableton Live 9 and Ableton Live Lite 8. Please ensure that you have the most up to date version. Go to www.ableton.com to get the latest installers.
Page 7
TEMPLATE SWITCHING AND THE TEMPLATE EDITOR Launch Control is not just a 16 pot, 8 pad controller; up to 16 templates are available totalling 448 available controls. To switch template press and hold either the User or Factory template buttons. The 8 pads then will light up, with the selected template brightly lit.
Need help?
Do you have a question about the Launch Control and is the answer not in the manual?
Questions and answers