Sun joe SWJ807E Operator's Manual

Sun joe SWJ807E Operator's Manual

10-inch 8-amp 2-in-1 electric pole + chain saw

Advertisement

A Division of Snow Joe
, LLC
®
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
m
DANGER!
This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
m
WARNING!
This indicates a hazardous situation, which,
if not avoided, could result in serious injury or death.
m
CAUTION!
This indicates a hazardous situation, which,
if not avoided, could result in minor or moderate injury.
General Safety
m
WARNING!
When using electric yard tools, basic safety
precautions should always be followed to reduce the risk of
fire, electric shock, and personal injury, including the following:
1. Keep guards in place – Protective guards should be
checked periodically to ensure they are properly fitted and
in correct working order.
2. Remove adjusting keys and wrenches – Check that
adjusting wrenches are removed from the saw before
turning it on.
3. Keep work area clean and well-lit – Clear work area of
branches and limbs after each cutting session. Cluttered
areas invite accidents.
4. Do not use in dangerous environments – Do not use
power tools in damp or wet locations.
5. Do not use the 2-in-1 pole + chain saw in the rain.
6. Keep bystanders and children away – All bystanders,
including children and pets, should be kept a safe
distance away from the work area.
7. Do not force the tool – It will do the job effectively and
safely if it is used at the rate for which it was designed.
8. Use the right tool – Do not force the tool or any
attachment on the tool to do a job for which they were
not designed.
9. Wear proper apparel – Do not wear loose articles of
clothing or jewelry since such items may get caught
in moving parts. Use of heavy-duty rubber gloves,
substantial non-skid footwear, and close-fitting clothing is
recommended when working outdoors with power tools.
© 2016 by Snow Joe
, LLC
®
All rights reserved. Original instructions.
10-INCH 8-AMP 2-IN-1
ELECTRIC POLE + CHAIN SAW
Model SWJ807E
10. Wear protective hair coverings to contain long hair.
11. Always wear safety glasses and ear defenders to
provide eye and ear protection – Everyday eyeglasses
only have impact resistant lenses and do not provide the
same protection as safety glasses.
12. Wear face or dust masks – If the cutting operation is
dusty, the use of a face or dust mask specially designed
to filter out microscopic particles is recommended.
13. Do not overreach – Keep proper footing and balance
at all times.
14. Maintain tools with care – Keep tools sharp and clean
for best and safest performance. Follow instructions for
lubricating and changing accessories.
15. Disconnect tool – Disconnect the 2-in-1 pole + chain saw
from the power supply when not in use, before servicing,
when transporting, or when changing the chain or other
accessories.
16. Reduce the risk of unintentional starting – Make sure
the switch is in the OFF position before plugging the tool
into a power source.
17. Use recommended accessories – Consult the owner's
manual for recommended accessories. The use of
improper accessories may cause risk of injury.
18. Check for damaged parts – Before each use, repair, or
replace any guard or part that is damaged. In addition,
check for alignment of moving parts, binding of moving
parts, breakage of parts, and any other conditions that
may affect the tool's operation.
19. Never leave tool unattended while it is running – Turn
the power OFF by removing the power cord directly from
its socket. Do not leave the saw until the cutting bar
comes to a complete stop.
20. Avoid unintentional starting – Do not carry the 2-in-1
pole + chain saw with your finger on the switch.
21. Do not grasp the exposed cutting blade or cutting
edges when picking up or holding the saw – Be sure to
encase the cutting bar in its protective sheath when not
in use.
22. Stay alert – Watch what you are doing. Use common
sense. Do not operate the 2-in-1 pole + chain saw when
you are tired.
23. Store idle tool indoors – When not in use, appliances
should be stored indoors in a dry and high or locked-up
place out of the reach of children.
m
WARNING!
Some dust and debris created by the
use of the tool could contain chemicals known to the State
of California to cause cancer and birth defects or other
reproductive harm. Some examples of these chemicals are:
SAVE THESE INSTRUCTIONS
1
Let Gravity Do The Work
Form No. SJ-SWJ807E-880E-M
OPERATOR'S MANUAL
TM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SWJ807E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Sun joe SWJ807E

  • Page 1 10-INCH 8-AMP 2-IN-1 Let Gravity Do The Work ELECTRIC POLE + CHAIN SAW Model SWJ807E Form No. SJ-SWJ807E-880E-M OPERATOR’S MANUAL A Division of Snow Joe , LLC ® IMPORTANT! 10. Wear protective hair coverings to contain long hair. 11. Always wear safety glasses and ear defenders to Safety Instructions provide eye and ear protection –...
  • Page 2: Electrical Safety

    • Chemicals in fertilizers WARNING! • Compounds in insecticides, herbicides, and pesticides • Arsenic and chromium from chemically treated lumber Electric shock may cause SEVERE INJURY or Your risk from exposure to these chemicals varies, and DEATH. Heed these warnings: depends on how often you do this type of work.
  • Page 3 Specific Safety Rules Operating Tips for Chain Saws • Keep all parts of the body away from the saw chain when WARNING! SHOCK HAZARD! – To protect yourself the chain saw is operating. Before you start the chain saw, from electrocution, do not operate the 2-in-1 pole + chain make sure the saw chain is not contacting anything.
  • Page 4 • Use extreme caution when re-entering a previous cut. • Use the low-kickback chain and guide bar supplied with this 2-in-1 pole + chain saw. Only use genuine Snow Joe ® + Sun Joe replacement parts designed specifically for ® use with this 2-in-1 pole + chain saw.
  • Page 5: Safety Symbols

    Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, Keep bystanders and children and follow all instructions in the a safe distance away.
  • Page 6: Technical Data

    Know Your 2-in-1 Electric Pole + Chain Saw Read the owner’s manual and safety instructions carefully before operating the 2-in-1 pole + chain saw. Compare the illustration below to the 2-in-1 pole + chain saw in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
  • Page 7: Carton Contents

    2. Inspect the product carefully to make sure no breakage or damage occurred during shipping. If you find damaged or missing parts, DO NOT return the unit to the store. Please Fig. 1 call the Snow Joe + Sun Joe customer service center at ® ® 1-866-SNOWJOE (1-866-766-9563).
  • Page 8 Fig. 3 Fig. 6 Cutting bar Chain Loop 6. Hold the chain in position on the bar and place the loop 3. Remove the old chain from the bar. around the sprocket. Fit the bar flush against the mounting surface so that the bar studs are in the long slot of the bar 4.
  • Page 9 9. Remove all slack from the chain by turning the chain 2. While pulling the handle lock, use the other hand to grasp tensioner screw clockwise until the chain seats snugly the front hand grip and slide the removable cutting head against the bar with the drive links in the bar groove up to remove it (Fig.
  • Page 10: Chain Saw Assembly

    Operation Chain Saw Assembly 1. To remove the cutting head from the telescoping pole, Starting and Stopping PULL the cutting head lock back to release, and grasping the front hand grip, SLIDE UP to remove the cutting head CAUTION! (Fig. 14). •...
  • Page 11 WARNING! Do not operate the 2-in-1 pole + chain saw Extension cord Fig. 18 in a tree, on a ladder, or on a scaffold. Using the tool under restraint hook such circumstances is extremely dangerous. CAUTION! The chain will continue to run for several seconds after turning off the tool.
  • Page 12 3. Extend the pole to the desired length (Fig. 21). Fig. 23 NOTE: Push poles toward each other to shorten the pole or pull them away from each other to lengthen the pole. Only extend the pole to the minimum length required to reach the limb to be cut.
  • Page 13 Basic Cutting Procedure • Release the trigger ON/OFF switch as soon as the cut is completed. Failure to follow proper cutting procedures will This unit is designed for trimming small branches and limbs up result in the bar and chain binding and becoming pinched to recommended 7.5 in.
  • Page 14: Felling A Tree

    Basic Cutting Procedures • Before felling is started, consider the natural lean of the tree, the location of larger branches and the wind direction to help you judge which way the tree will fall. WARNING! Do not cut limbs or trees that are larger •...
  • Page 15: Bucking A Log

    Fig. 29 Fig. 30B • When the log is supported on both ends (Fig. 30C), cut WARNING! Pay special attention to where the branches 1/3 the diameter from the top (overbuck). Then make the are lying on the ground and recognize the following risks: finishing cut by underbucking the lower 2/3 to meet the 1).
  • Page 16: Maintenance

    Always stop the motor before moving from tree to tree. Flats are not visible here Maintenance Approximately .050 in. (1.25 mm) Please contact an authorized Snow Joe + Sun Joe dealer ® ® or call the Snow Joe + Sun Joe customer service center ®...
  • Page 17: Guide Bar Maintenance

    You can purchase replacement parts for your Sun Joe and lubricate the chain in an oil bath. Replace the chain ® SWJ807E 2-in-1 electric pole + chain saw by ordering online at whenever: snowjoe.com or, to order by phone, contact Snow Joe ®...
  • Page 18: Troubleshooting Table

    To help maintain your electric 2-in-1 pole + chain saw for optimum performance, we recommend you complete this If your Sun Joe SWJ807E 2-in-1 electric pole + chain saw ® checklist prior to each work session. requires service or maintenance, please call 1-866-SNOWJOE (1-866-766-9563) for assistance.
  • Page 19 Optional Accessories WARNING! ALWAYS use only authorized Snow Joe + Sun Joe replacement parts and accessories. NEVER use ® ® replacement parts or accessories that are not intended for use with this saw. Contact Snow Joe + Sun Joe if you are unsure ®...
  • Page 20 NOTES...
  • Page 21 NOTES...
  • Page 22 NOTES...
  • Page 23 SNOW JOE + SUN JOE CUSTOMER PROMISE ® ® ABOVE ALL ELSE, Snow Joe + Sun Joe are dedicated to you, our customer. We strive to make your experience as pleasant ® ® as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us.
  • Page 24 snowjoe.com WARNING! This product or its power cord contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known [to the State of California] to cause cancer, birth defects, or other reproductive harm.

Table of Contents

Save PDF