Charging The Speaker; Play Music Via Bluetooth - SACK it WOOFIT GO User Manual

Micro USB Power
charging input button
4

CHARGING THE SPEAKER

1. Before you use the speaker the first time, please use the included USB
charging cable to charge the WOOFit Go speaker fully.
2. When charging, a red indicator light is flashing. When fully charged, the
red indicator light will turn off.
Note:
- Please do not charge the speaker while playing music
- Please use an appropriate adapter for charging

PLAY MUSIC VIA BLUETOOTH

1. Click the Power button to turn on the speaker. The indicator light will
flash white, and you will hear a "beep" sound. This indicates that the
speaker is in Bluetooth pairing mode, and ready to connect.
2. Turn on Bluetooth on the device, you want to connect to the speaker
3. Choose "WOOFit Go" in the Bluetooth settings on your device. When
pairing is successful, the indicator light shows a constant white light,
and you will hear the message "connected"
4. If you need to switch to another Bluetooth device, please double click
the Power button to disconnect. The indicator light will start flashing,
and you can repeat the pairing process from step one
WOOFit Go is automatically connected to your Bluetooth device, if the
Bluetooth pairing was successful before shutdown. The next time you turn
on the speaker, it will automatically be connected to your Bluetooth device,
and the indicator light will not flash.
Note: The WOOFit Go speaker will automatically enter standby mode
after 15 minutes of no activity.
5