Modes; Flying Action; Tumbling Action; Cleaning Tips - VR PROMARK p70- vr Instruction Manual

MODES

NORMAL MODE
Normal flight mode is turned on by default,and conventional flying quadcopter fly.
ALTITUDE - HOLDING MODE
Press the Camera Key to access the Pressure Height-setting Mode. This will keep the height of the quadcoptor at it's current
height. Push throttle lever upward and the quadcoptor will begin ascending. Push downward on the throttle lever and the
quadcoptor will begin descending. When the throttle lever is returned back to the neutral position the quadcoptor will automati-
cally set the height. Press the Camera Key to exit the Pressure Height-setting Mode.
HEADLESS MODE
Place the quadcoptor in the front forward. After finish decoding and taking off, press shortly the Headless Mode Key on the
transmitter to access into the Headless Mode. Press shortly once again to exit the Headless Mode.

FLYING ACTION

3D TUMBLING FUNCTION

CLEANING TIPS

1) Use soft clean cloth to wipe clean
2) Avoid excessive heat
3) Do not get wet
4) Check plug and other accessories regularly. If damage has occurred, stop using quadcopter immediately until repaired.
VIRTUAL
Thanks of the 6 axis gyroscope, you can throw the quadcopter and push the
throttle right up, it will automatically level out and hover smoothly in the sky,
this can also be done when the quadcopter is rolling.
Fly to about 30 feet. and hit the 360 degree one touch flip button. Flip and push
right controller to highest position.
REALITYDRONE
Page 7